- Latest available (Revised)
- Point in Time (27/10/2017)
- Original (As made)
Point in time view as at 27/10/2017.
There are currently no known outstanding effects for the The Natural Mineral Water, Spring Water and Bottled Drinking Water Regulations (Northern Ireland) 2015,
PART 2
.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1 Use the following method to make m-CP agar: | |
Parameter | Method |
---|---|
Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m-CP agar1 at 44 ±1ºC for 21± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds. |
Coliform bacteria | BS-EN ISO 9308-1 |
Colony count 22ºC – enumeration of culturable microorganisms | BS-EN ISO 6222 |
Colony count 37ºC – enumeration of culturable microorganisms | BS-EN ISO 6222 |
Enterococci | BS-EN ISO 7899-2 |
Escherichia coli (E. Coli) | BS-EN ISO 9308-1 |
Pseudomonas aeruginosa | BS-EN ISO 12780 |
Make a basal medium consisting of—
Tryptose | 30.0g |
Yeast extract | 20.0g |
Sucrose | 5.0g |
L-cysteine hydrochloride | 1.0g |
MgSO4.7H2O | 0.1g |
Bromocresol purple | 40.0mg |
Agar | 15.0g |
Water | 1,000.0ml |
Dissolve the ingredients of basal medium, adjust pH to 7.6 and autoclave at 121ºC for 15 minutes. Allow the medium to cool. | |
Dissolve— | |
D-cycloserine | 400.0mg |
Polymyxine-B sulphate | 25.0mg |
Indoxl-β-D-glucoside | 60.0mg |
into 8ml sterile water and add it to the medium. | |
Add to the medium— | |
Filter-sterilised 0.5% phenolphthalein diphosphate solution | 20.0ml |
Filter-sterilised 4.5% FeCl3.6H2O | 2.0ml |
1 The method of analysis should determine total cyanide in all forms. | |||
2 Oxidation should be carried out for 10 minutes at 100ºC under acid conditions using permanganate. | |||
3 The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned. | |||
4 The performance characteristics apply to the individual substances specified at 25% of the parametric value in Table B in Part 2, Schedule 7. | |||
5 The performance characteristics apply to the individual substance specified at 50% of the parametric value in Table B in Part 2, Schedule 7. | |||
Parameters | Trueness % of prescribed concentration or value specification | Precision % of prescribed concentration or value or specification | Limit of detection % of prescribed concentration or value or specification |
---|---|---|---|
Aluminium | 10 | 10 | 10 |
Ammonium | 10 | 10 | 10 |
Antimony | 25 | 25 | 25 |
Arsenic | 10 | 10 | 10 |
Benzene | 25 | 25 | 25 |
Benzo(a)pyrene | 25 | 25 | 25 |
Boron | 10 | 10 | 10 |
Bromate | 25 | 25 | 25 |
Cadmium | 10 | 10 | 10 |
Chloride | 10 | 10 | 10 |
Chromium | 10 | 10 | 10 |
Conductivity | 10 | 10 | 10 |
Copper | 10 | 10 | 10 |
Cyanide1 | 10 | 10 | 10 |
1,2-dichloroethane | 25 | 25 | 10 |
Fluoride | 10 | 10 | 10 |
Iron | 10 | 10 | 10 |
Lead | 10 | 10 | 10 |
Manganese | 10 | 10 | 10 |
Mercury | 20 | 10 | 20 |
Nickel | 10 | 10 | 10 |
Nitrate | 10 | 10 | 10 |
Nititre | 10 | 10 | 10 |
Oxidisability2 | 25 | 25 | 10 |
Pesticides and related products3 | 25 | 25 | 25 |
Polycyclic aromatic hydrocarbons4 | 25 | 25 | 25 |
Selenium | 10 | 10 | 10 |
Sodium | 10 | 10 | 10 |
Sulphate | 10 | 10 | 10 |
Tetrachloroethene5 | 25 | 25 | 10 |
Tetrachloromethane | 20 | 20 | 20 |
Trichloroethene5 | 25 | 25 | 10 |
Trihalomethanes4 | 25 | 25 | 10 |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Rule and provides information about its policy objective and policy implications. They aim to make the Statutory Rule accessible to readers who are not legally qualified and accompany any Northern Ireland Statutory Rule or Draft Northern Ireland Statutory Rule laid before the UK Parliament during the suspension of the Northern Ireland Assembly.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: