- Latest available (Revised)
- Point in Time (01/10/2023)
- Original (As made)
Point in time view as at 01/10/2023.
There are currently no known outstanding effects for the The Natural Mineral Water, Spring Water and Bottled Drinking Water Regulations (Northern Ireland) 2015, SCHEDULE 11.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 25(1)(b)
1. The district council must ensure that each sample is analysed for indicative dose in accordance with Annex III to Directive 2013/51 and this Part.
2. For each parameter and radionuclide specified in the first column of Table 1 in Part 2, the derived concentration and dose coefficient for calculating the indicative dose is specified in the second column of that table.N.I.
3. For each parameter specified in the first column of Table 2 in Part 2, the method of analysis must be one that is capable of detecting the parameter at the limit of detection specified in the second column of that table.N.I.
4. If the following formula is satisfied, the indicative dose is considered to be less than the parametric value of 0.1 mSv and no further investigation is required—N.I.
where
Ci(obs) = observed concentration radionuclide i
Ci(der) = derived concentration of radionuclide i
n = number of radionuclides detected
1 This table allows only for the radiological properties of uranium, not for its chemical toxicity. | ||
Origin | Nuclide | Derived concentration |
---|---|---|
Natural | U-2381 | 3.0 Bq/l |
U-2341 | 2.8 Bq/l | |
Ra-226 | 0.5 Bq/l | |
Ra-228 | 0.2 Bq/l | |
Pb-210 | 0.2 Bq/l | |
Po-210 | 0.1 Bq/l | |
Artificial | C-14 | 240 Bq/l |
Sr-90 | 4.9 Bq/l | |
Pu-239/Pu-240 | 0.6 Bq/l | |
Am-241 | 0.7 Bq/l | |
Co-60 | 40 Bq/l | |
Cs-134 | 7.2 Bq/l | |
Cs-137 | 11 Bq/l | |
I-131 | 6.2 Bq/l |
1 The limit of detection is calculated according to the ISO standard 11929: Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionising radiation – Fundamentals and application, with probabilities of errors of 1st and 2nd kind of 0.05 each. | ||
2 Measurement uncertainties are calculated and reported as complete standard uncertainties, or as expanded standard uncertainties with an expansion factor of 1.96, according to the ISO Guide for the Expression of Uncertainty in Measurement. | ||
3 The limit of detection for tritium and for radon is 10% of its parametric value of 100 Bq/l. | ||
4 The limit of detection for gross alpha activity and gross beta activities are 40% of the screening values of 0.1 and 1.0 Bq/l respectively. | ||
5 This limit of detection applies only to initial screening for indicative dose for a new water source. If initial checking indicates that it is not plausible that Ra-228 exceeds 20% of the derived concentration, the limit of detection may be increased to 0.08 Bq/l for routine Ra-228 nuclide specific measurements, until a subsequent re-check is required. | ||
Parameters and radionuclides | Limit of detection12 | |
---|---|---|
Tritium | 10 Bq/l 3 | |
Radon | 10 Bq/l 3 | |
gross alpha activity gross beta activity | 0.04 Bq/l 4 0.4 Bq/l 4 | |
U-238 | 0.02 Bq/l | |
U-234 | 0.02 Bq/l | |
Ra-226 | 0.04 Bq/l | |
Ra-228 | 0.02 Bq/l 5 | |
Pb-210 | 0.02 Bq/l | |
Po-210 | 0.01 Bq/l | |
C-14 | 20 Bq/l | |
Sr-90 | 0.4 Bq/l | |
Pu-239/Pu-240 | 0.04 Bq/l | |
Am-241 | 0.06 Bq/l | |
Co-60 | 0.5 Bq/l | |
Cs-134 | 0.5 Bq/l | |
Cs-137 | 0.5 Bq/l | |
I-131 | 0.5 Bq/l |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Rule and provides information about its policy objective and policy implications. They aim to make the Statutory Rule accessible to readers who are not legally qualified and accompany any Northern Ireland Statutory Rule or Draft Northern Ireland Statutory Rule laid before the UK Parliament during the suspension of the Northern Ireland Assembly.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: