- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
2.—(1) The Motor Vehicles (Construction and Use) Regulations (Northern Ireland) 1999(1) are amended in accordance with paragraphs (2) to (4).
(2) In regulation 24 (maintenance and efficiency of brakes)—
(a)in Table 1—
(i)after item 3 insert—
“3A | A motor tractor which is driven at more than 40km/h— | |
(a) when not drawing a trailer | 50 25 | |
(b) when drawing a non-agricultural trailer | 45 25”; and |
(ii)in item 4 for “1 to 3” substitute “1 to 3A”; and
(b)after paragraph (5) insert—
“(5A) For a motor tractor which is driven at more than 40km/h, when drawing an agricultural trailer each component of the combination shall comply with the requirements of that component specified in item 3A(a) of Table 1 and paragraph (10)(c).”.
(3) In Table 1 in Schedule 1 (community directives and ECE regulations)—
(a)omit item 88C;
(b)omit item 97; and
(c)after item 106 insert—
“107 | 2014/45 | 29.4.14 | L127, 29.4.14, p.51 | Periodic roadworthiness tests for motor vehicles and their trailers | 2009/40 |
108 | 2014/47 | 29.4.14 | L127, 29.4.14, p.134 | Technical roadside inspection of the roadworthiness of commercial vehicles | 2000/30”. |
(4) For paragraph 8 of Part II of Schedule 10 (emissions from certain motor vehicles) substitute—
“8.—(1) This part of the Schedule applies to a vehicle if, when subjected to the “relevant test”, the coefficient of absorption of the exhaust emission from the engine of the vehicle immediately after leaving the exhaust system exceeds—
(a)if the vehicle is first used before 1st July 2008 and the engine of that vehicle is turbo-charged, 3.0 per metre, or the manufacturer’s plate value if lower;
(b)if the vehicle is first used before 1st July 2008 and the engine of that vehicle is not turbo-charged, 2.5 per metre, or the manufacture’s plate value if lower;
(c)if the vehicle is first used on or after 1st July 2008 but before 1st January 2014, the manufacturer’s plate value if available, otherwise 1.5 per metre; or
(d)if the vehicle is first used on or after 1st January 2014, the manufacturer’s plate value if available, otherwise 0.7 per metre.
(2) In paragraph (1) “a relevant test” means a test conducted in accordance with—
(a)point 8.2.2 of Annex I of Directive 2014/45/EU; or
(b)point 8.2.2 of Annex II of Directive 2014/47/EU.”.
S.R. 1999 No. 454 relevant amending Regulations are S.R. 2003 No. 517, S.R. 2004 No. 67, S.R. 2010 No. 181 and S.R. 2012 No. 150
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Rule and provides information about its policy objective and policy implications. They aim to make the Statutory Rule accessible to readers who are not legally qualified and accompany any Northern Ireland Statutory Rule or Draft Northern Ireland Statutory Rule laid before the UK Parliament during the suspension of the Northern Ireland Assembly.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: