- Latest available (Revised)
- Point in Time (30/06/2009)
- Original (As made)
Point in time view as at 30/06/2009.
There are currently no known outstanding effects for the The Cereal Seed (Scotland) Regulations 2005, PART I.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1. The Scottish Ministers may ascertain, so far as practicable, whether the requirements for the crop set out in this Part of this Schedule are met by the use of methods which shall include official field inspection of the crop and which may include examination of a control plot sown with a sample from the seed lot and the consideration of any other relevant information.
Commencement Information
I1Sch. 4 para. 1 in force at 1.7.2005, see reg. 1(1)
2. The characteristics used for the determination of varietal identity and varietal purity shall be those to which regard was had when the relevant variety was accepted on to the relevant UK National List, an equivalent list in another EEA State or the Common Catalogue.
Commencement Information
I2Sch. 4 para. 2 in force at 1.7.2005, see reg. 1(1)
3.—(1) An official examination of the crop shall be made by means of an official field inspection.
(2) The official field inspection shall only be carried out when the cultural condition of the field and the stage of development and condition, including state of health, of the crop–
(a)are such as to permit suitable checks of varietal identity, varietal purity, species purity and wild oats contamination to be made; and
(b)meet the requirements of the Scottish Ministers.
(3) A crop from which HVS level seed of Basic Seed, Certified Seed of the First Generation or Certified Seed of the Second Generation is to be produced shall not be more than one third lodged at the time of inspection.
(4) Subject to sub paragraphs (5) and (6), at least one field inspection of the crop shall be carried out.
(5) Subject to sub-paragraph (6), at least three field inspections shall be carried out in the case of an inbred line or hybrid of maize.
(6) In the case of maize, where the crop to be examined follows a maize crop in either the preceding or current year, at least one special field inspection shall be carried out to check that the condition contained in paragraph 1 has been complied with.
(7) For the purposes of this paragraph “lodged” means an area of crop which has been displaced from the vertical by more than 45 degrees.
Commencement Information
I3Sch. 4 para. 3 in force at 1.7.2005, see reg. 1(1)
4. Harmful organisms which reduce the usefulness of the seed, in particular Ustilaginaceae, shall be at the lowest possible level.
Commencement Information
I4Sch. 4 para. 4 in force at 1.7.2005, see reg. 1(1)
5.—(1) The previous cropping of the field shall not have been incompatible with the production of seed of the species and variety of the crop, and the field shall be sufficiently free from plants which are volunteers from previous cropping.
(2) The crop may be grown only on land which complies with the Scottish Ministers' requirements in respect of previous cropping.
Commencement Information
I5Sch. 4 para. 5 in force at 1.7.2005, see reg. 1(1)
6. There shall be either a physical barrier or at least 2 metres of fallow ground between the seed crop and any crop likely to cause contamination in the seed.
Commencement Information
I6Sch. 4 para. 6 in force at 1.7.2005, see reg. 1(1)
7. For maize, rye and self pollinating varieties of triticale, the minimum distance from neighbouring crops or plants of other species, or of other varieties of the same species, liable to cross pollinate with the crop shall be the distances specified in column 2 of the following table for the corresponding crop specified in column 1 of the table (which can include any distance of at least 2 metres of fallow ground required under paragraph 6)–
Column 1 | Column 2 |
---|---|
Crop | Minimum Distance |
(a)Maize– | |
(i)for the production of Basic Seed | 200 metres |
(ii)for the production of Certified Seed | 200 metres |
(b)Self–pollinating variety of triticale | |
(i)for the production of Basic Seed | 50 metres |
(ii)for the production of Certified Seed | 20 metres |
(c)Rye (other than hybrids)– | |
(i)for the production of Basic Seed | 300 metres |
(ii)for the production of Certified Seed | 250 metres |
(d)Hybrids of rye– | |
(i)for the production of Basic Seed where male sterility is used | 1,000 metres |
(ii)for the production of Basic Seed where male sterility is not used | 600 metres |
(iii)for the production of Certified Seed | 500 metres |
but with the approval of the Scottish Ministers these distances may be modified or disregarded if there is adequate protection against undesirable foreign pollen.
Commencement Information
I7Sch. 4 para. 7 in force at 1.7.2005, see reg. 1(1)
8.—(1) The crop shall have sufficient varietal identity and varietal purity, including–
(a)in the case of a crop of an inbred line, sufficient varietal identity and varietal purity as regards its characteristics; and
(b)in the case of a crop used for the production of seed of hybrid varieties, sufficient varietal identity and varietal purity as regards the characteristics of the components of the hybrid variety, including male sterility or fertility restoration.
(2) In crops of rye, including hybrids of rye, the number of plants of the crop species which are recognisable as obviously not being true to the variety shall not exceed–
(a)one plant in 30 square metres for the production of Basic Seed; and
(b)subject to sub-paragraph (4)(a) in relation to hybrids of rye, one plant in 10 square metres for the production of Certified Seed.
(3) In crops of maize–
(a)the percentage by number of plants which are recognisable as obviously not being true to the variety, to the inbred line or to the component shall not exceed the percentage specified in column 2 of the following table corresponding to the relevant crop specified in column 1 of the table–
Column 1 | Column 2 |
---|---|
Crop of maize | Percentage by number of plants |
(i)For the production of Basic Seed– | |
(aa)inbred lines | 0.1% |
(bb)simple hybrid, each component | 0.1% |
(cc)open-pollinated varieties | 0.5% |
(ii)For the production of Certified Seed– | |
(aa)a component of a hybrid variety | |
(aaA)in the case of an inbred line | 0.2% |
(aaB)in the case of a simple hybrid | 0.2% |
(aaC)in the case of open pollinated variety | 1.0% |
(bb)in the case of open pollinated varieties | 1.0% |
(b)used for the production of seed of hybrid varieties–
(i)sufficient pollen shall be shed by the plants of the male component while the plants of the female component are in flower;
(ii)where appropriate emasculation shall be carried out; and
(iii)where 5% or more of the female component plants have receptive stigmas, the percentage of female component plants which have shed pollen or are shedding pollen shall not exceed–
(aa)1% at any official field inspection; and
(bb)2% at the total of the official field inspections;
(c)for the purposes of sub paragraphs (b)(i) and (iii) plants shall be considered as having shed pollen or to be shedding pollen where, on 50 millimetres or more of the central axis or laterals of a panicle, the anthers have emerged from their glumes and have shed or are shedding pollen.
(4) In crops of hybrids of rye–
(a)in an official field inspection the standard in paragraph (2)(b) shall apply to the female component only;
(b)in the case of Basic Seed, where male sterility is used, the level of sterility of the male sterile component shall be at least 98%; and
(c)where appropriate, Certified Seed shall be produced in mixed cultivation of a female male sterile component with a male component which restores male fertility.
(5) In crops of hybrids of barley, durum wheat, oats, self pollinating triticale, spelt wheat or wheat–
(a)subject to sub paragraph (b) varieties of the female component of the crop shall be at least 25 metres from a crop of any other variety of the same species except from a crop of the male component;
(b)sub paragraph (a) shall not apply if there is sufficient protection from any undesirable foreign pollination;
(c)where seed is produced using a chemical hybridisation agent, the crop shall conform to the following standards or other conditions–
(i)the minimum varietal purity of each component shall be–
(aa)in the case of barley, durum wheat, oats, spelt wheat or wheat, 99.7%; and
(bb)in the case of self pollinating varieties of triticale, 99.0%; and
(ii)the minimum hybridity must be 95%; and
(d)in cases where the hybridity is determined during seed testing prior to certification, the determination of the hybridity during a field inspection need not be done.
Commencement Information
I8Sch. 4 para. 8 in force at 1.7.2005, see reg. 1(1)
9. The maximum number of wild oats per hectare shall be as follows–
Crops to produce | Level where applicable | Barley (other than hybrids) | Hybrid of barley | Durum wheat, spelt wheat and wheat (other than hybrids in each case) | Hybrid of durum wheat, spelt wheat and wheat | Maize and rye (including hybrids) | Oats (other than hybrids) | Hybrid of oats | Hybrid of self-pollinating varieties of triticale | Triticale |
---|---|---|---|---|---|---|---|---|---|---|
Basic Seed | HVS | 7 | n/a | 7 | n/a | n/a | 0 | n/a | n/a | n/a |
Minimum | 7 | n/a | 7 | n/a | 7 | 0 | n/a | n/a | 7 | |
Certified Seed | – | n/a | 20 | n/a | 50 | 50 | n/a | 0 | 50 | n/a |
Certified Seed of the First Generation | HVS | 7 | n/a | 7 | n/a | n/a | 0 | n/a | n/a | n/a |
Minimum | 20 | n/a | 50 | n/a | n/a | 0 | n/a | n/a | 50 | |
Certified Seed of the Second Generation | HVS | 7 | n/a | 7 | n/a | n/a | 0 | n/a | n/a | n/a |
Minimum | 20 | n/a | 50 | n/a | n/a | 0 | n/a | n/a | 50 |
Commencement Information
I9Sch. 4 para. 9 in force at 1.7.2005, see reg. 1(1)
10. In the case of barley, durum wheat, oats, spelt wheat and wheat, the crop shall conform to the following standards as regards the minimum species purity–
Crops to produce | Minimum standard (percentage by number) | Higher Voluntary Standard (percentage by number) |
---|---|---|
(a)Basic seed | n/a | 99.99% |
(b)Certified Seed of the First Generation | n/a | 99.99% |
(c)Certified Seed of the Second General | n/a | 99.99% |
Commencement Information
I10Sch. 4 para. 10 in force at 1.7.2005, see reg. 1(1)
11. The maximum percentage by number of loose smut infection shall be as follows–
Column 1 | Column 2 | Column 3 |
---|---|---|
Category (Barley, durum wheat, spelt wheat and wheat) | Level (where appropriate) | Maximum percentage by number of loose smut infection |
(a)Basic Seed | HVS | 0.1% |
Minimum | 0.5% | |
(b)Certified Seed | – | 0.5% |
(c)Certified Seed of the First Generation | HVS | 0.2% |
Minimum | 0.5% | |
(d)Certified Seed of the Second Generation | HVS | 0.2% |
Minimum | 0.5% |
Seeds produced from a crop which has failed on official examination to meet the standards laid down by this paragraph may nevertheless be eligible for official certification–
(a)if they have been adequately treated by any method approved by the Scottish Ministers for the control of loose smut; or
(b)if an embryo test carried out by an official seed testing station, on the sample submitted for official examination shows that the seeds meet the seed standards in paragraph 18.
Commencement Information
I11Sch. 4 para. 11 in force at 1.7.2005, see reg. 1(1)
12. For the purpose of determining whether a crop from which Pre basic Seed is to be produced meets the conditions specified in this Part of this Schedule, the crop from which such seed is to be produced shall be treated in the same way as a crop from which minimum level Basic Seed is to be produced.
Commencement Information
I12Sch. 4 para. 12 in force at 1.7.2005, see reg. 1(1)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: