- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
18.—(1) The limits of the port within which the Company shall exercise jurisdiction and the harbour master shall exercise his powers shall be the area bounded by an imaginary straight line commencing at a point (PL1) at 54°58.08'N, 005°00.94'W thence extending in an imaginary straight line to a point (PL2) at 54°58.07'N, 005°01.02'W thence extending in an imaginary straight line to a point (PL3) at 54°58.07'N, 005°01.83'W thence extending in an imaginary straight line to a point (PL4) at 54°57.34'N, 005°01.31'W thence extending in an imaginary straight line to a point (PL5) at 54°57.34'N, 005°00.52'W thence extending in an imaginary straight line to a point (PL6) at 54°57.36'N, 005°00.39'W thence following the western boundary (as existing from time to time) of the A77 trunk road to the point of commencement.
(2) The area described in paragraph (1) above is, for the purpose of identification only, shown edged red on sheet 13 of the deposited plans and, in the event that there is any discrepancy between the description of that area and the area shown on that sheet, the description shall prevail.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: