- Latest available (Revised)
- Point in Time (07/03/2009)
- Original (As made)
The Materials and Articles in Contact with Food (Scotland) Regulations 2007 (revoked)
You are here:
- Scottish Statutory Instruments
- 2007 No. 471
- PART 4
- Regulation 11
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
Opening Options
More Resources
Status:
Point in time view as at 07/03/2009. This version of this provision has been superseded.
Status
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Changes to legislation:
There are currently no known outstanding effects for the The Materials and Articles in Contact with Food (Scotland) Regulations 2007 (revoked), Section 11.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Migration limits for regenerated cellulose film coated with plasticsS
This section has no associated Executive Note
11.—(1) Subject to paragraph (2), no person may manufacture or import any material or article made with regenerated cellulose film coated with plastics which–
(a)is intended to come into contact with food; and
(b)is capable of transferring its constituents to food in quantities exceeding an overall migration limit of 10 milligrams per square decimetre of the surface of the material or article in contact with food.
(2) In the case of any material or article made with regenerated cellulose film coated with plastics which–
(a)is or is comparable to a container or which can be filled with a capacity of not less than 500 millilitres and not more than 10 litres; or
(b)can be filled and for which it is impracticable to estimate the surface area in contact with food; or
(c)is a cap, gasket, stopper or similar device for sealing,
the overall migration limit shall be 60 milligrams of constituents transferred per kilogram of food.
(3) No person may manufacture or import any material or article made with regenerated cellulose film coated with plastics manufactured with any substance listed in Section A or B of Annex II to Directive 2002/72/EC (authorised monomers and other starting substances) which–
(a)is intended to come into contact with food; and
(b)is capable of transferring its constituents to food in quantities exceeding the specific migration limits set out in column 4 of those Sections as read with the general introduction to that Annex.
(4) Where the migration limit for a substance mentioned in paragraph (3) is expressed in milligrams per kilogram, in the case of regenerated cellulose film coated with plastics which–
(a)is or is comparable to a container or which can be filled with a capacity of less than 500 millilitres or more than 10 litres; or
(b)cannot be filled or for which it is impracticable to estimate the relationship between the surface area of the film and the quantity of food in contact with it,
the migration limit shall be divided by the conversion factor of 6 in order to express it in milligrams of constituents transferred per square decimetre of the material or article in contact with food.
(5) Subject to paragraph (6), the verification of compliance with migration limits shall be conducted in accordance with the provisions of Schedules 2 and 3 of the [F12009] Regulations as read with [F2regulation 13] of those Regulations, and for the purposes of this paragraph any reference in those provisions to a plastic material or article shall be construed as a reference to regenerated cellulose film coated with plastics.
(6) Paragraph (5) shall not apply in any circumstances to which regulation 9(1) or (2) is applicable.
Textual Amendments
F1Word in reg. 11(5) substituted (7.3.2009) by The Plastic Materials and Articles in Contact with Food (Scotland) Regulations 2009 (S.S.I. 2009/30), regs. 1(1), 23(4)
F2Words in reg. 11(5) substituted (1.5.2008) by The Plastic Materials and Articles in Contact with Food (Scotland) Amendment Regulations 2008 (S.S.I. 2008/261), regs. 1, 4
Options/Help
Print Options
PrintThe Whole Instrument
PrintThe Whole Part
PrintThis Section only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
Executive Note
Executive Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2005 onwards.
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as enacted version that was used for the print copy
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as made version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.