- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Air Quality Standards (Scotland) Regulations 2010, PART 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1.—(1) These Regulations may be cited as the Air Quality Standards (Scotland) Regulations 2010 and come into force on 11th June 2010.
(2) These Regulations extend to Scotland only.
2. In these Regulations—
“ambient air” means outdoor air in the troposphere, excluding workplaces as defined by Council Directive 89/654/EEC M1 where provisions concerning health and safety at work apply and to which members of the public do not have regular access;
“AOT 40” (expressed in (μg/m3).hours) means the sum of the difference between hourly concentrations greater than 80 μg/m3 (= 40 parts per billion) and 80 μg/m3 over a given period using only the one-hour values measured between 0800 hours and 2000 hours Central European Time each day;
“arsenic”, “cadmium”, “nickel” and “benzo(a)pyrene” mean the total content of those elements and compounds within the PM10 fraction present in ambient air;
[F1“Directive 2004/107/EC” means Directive 2004/107/EC of the European Parliament and of the Council relating to arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons in ambient air [F2(but see regulation 2A)];]
[F3“Directive 2008/50/EC” means Directive 2008/50/EC of the European Parliament and of the Council on ambient air quality and cleaner air for Europe [F4(but see regulation 2A)];]
“fixed measurements” means measurements taken at fixed locations, either continuously or by sampling from time to time, to determine levels of pollutants in accordance with the relevant data quality objectives;
“indicative measurements” means measurements which meet data quality objectives that are less strict than those required for fixed measurements;
“margin of tolerance” means the percentage of the limit value by which that value may be exceeded in a given year;
“oxides of nitrogen” means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m3);
“ozone precursor substances” means substances which contribute to the formation of ground level ozone;
“PM10” means particulate matter which passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM10, EN 12341: 1998 M2, with a 50 per cent efficiency cut-off at 10 μm aerodynamic diameter;
“PM2.5” means particulate matter which passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM2.5, EN 14907: 2005c, with a 50 per cent efficiency cut-off at 2.5μm aerodynamic diameter;
“particulate matter” means PM2.5 and PM10;
“pollutant” means any of the following:—
sulphur dioxide;
nitrogen dioxide;
oxides of nitrogen;
particulate matter;
lead;
benzene;
carbon monoxide;
arsenic;
cadmium;
mercury;
nickel;
benzo(a)pyrene or other polycyclic aromatic hydrocarbons;
ozone;
“polycyclic aromatic hydrocarbons” means those organic compounds composed of at least two fused aromatic rings made entirely from carbon and hydrogen; and
“total gaseous mercury” means elemental mercury vapour (Hg0) and reactive gaseous mercury, being water-soluble mercury species with sufficiently high vapour pressure to exist in the gas phase.
Textual Amendments
F1Words in reg. 2 substituted (31.12.2016) by The Air Quality Standards (Scotland) Amendment Regulations 2016 (S.S.I. 2016/376), regs. 1, 3(a)
F2Words in reg. 2 inserted (1.6.2022) by The Environment and Trade in Animals and Related Products (EU Exit) (Scotland) (Miscellaneous Amendment) Regulations 2022 (S.S.I. 2022/138), regs. 1, 9(2)(a)
F3Words in reg. 2 substituted (31.12.2016) by The Air Quality Standards (Scotland) Amendment Regulations 2016 (S.S.I. 2016/376), regs. 1, 3(b)
F4Words in reg. 2 inserted (1.6.2022) by The Environment and Trade in Animals and Related Products (EU Exit) (Scotland) (Miscellaneous Amendment) Regulations 2022 (S.S.I. 2022/138), regs. 1, 9(2)(b)
Marginal Citations
M1O.J. No. L 393, 30.12.1989, p.1, amended by Directive 2007/30/EC (O.J. No. L 165, 27.6.2007, p.21).
M2These standards are issued by the European Committee for Standardisation (CEN). Copies may be obtained from CEN at 36, Rue de Strassart B-1050, Brussels, Belgium, http://www.cenorm.be.
2A.—(1) When interpreting Directive 2004/107/EC for the purposes of these Regulations—
(a)in Annex 2, in Section 2, the second paragraph is to be read as if for “Member States” there were substituted “the Scottish Ministers”,
(b)in Annex 3, in Section 4, paragraph (b), for “BAT as defined by Article 2(11) of Directive 96/61/EC” there is substituted “best available techniques (as defined in regulation 4 of the Pollution Prevention and Control (Scotland) Regulations 2012)”,
(c)in Annex 4, in Section 1, the fourth and fifth paragraphs following the table are to be read as if for “Member States” in each place where the words occur, there were substituted “The Scottish Ministers”,
(d)Annex 5 is to be read as if—
(i)in Sections 1, 2 and 3, in the second paragraph of each —
(aa)for “A Member State” there were substituted “The Scottish Ministers”,
(bb)for “it” there were substituted “they”,
(ii)in Section 2, in the first paragraph, for “Member States are allowed to” there were substituted “the Scottish Ministers may”,
(iii)Section 5 were omitted.
(2) When interpreting Directive 2008/50/EC for the purposes of these Regulations—
(a)Article 3(f) is to be read as if for “other Member States” there were substituted “Member States”,
(b)in Annex 1, in section A, footnote (1) is to be read as if—
(i)for “Member States” there were substituted “the Scottish Ministers”,
(ii)the words “to the Commission” were omitted,
(c)in Annex 1, section C is to be read as if—
(i)in paragraph 1, for “appropriate competent authorities and bodies designated pursuant to Article 3” there were substituted “Scottish Ministers”,
(ii)in subparagraph (i)—
(aa)the words “pursuant to Articles 6 and 9” were omitted,
(bb)for “set out in the harmonised standard for testing and calibration laboratories” there were substituted “of the ISO/IEC standard 17025”,
(iii)in subparagraph (iii), the words from “and that institutions” to the end were omitted,
(iv)in subparagraph (iv)—
(aa)for the first sentence there were substituted “that the National Reference Laboratories are appointed by the Scottish Ministers and are accredited for the reference methods referred to in Annex 6, at least for those pollutants for which concentrations are above the lower assessment threshold, according to the ISO/IEC standard 17025”,
(bb)in the second sentence, the words from “for the coordination” to “be responsible” were omitted,
(cc)in the third sentence, for the words “relevant harmonised standard for proficiency testing” there were substituted “ISO/IEC standard 17043”,
(v)subparagraphs (v) and (vi) were omitted,
(vi)in paragraph 2, for “All reported data under Article 27” there were substituted “All data”,
(d)in Annex 2, in Section B, the second paragraph is to be read as if for “Member States” there were substituted “the Scottish Ministers”,
(e)in Annex 3—
(i)in Section A, paragraph (2)(b) is to be read as if the words “in accordance with Article 2(1),” were omitted,
(ii)in Section B, paragraph 2 is to be read as if for “A Member State” there were substituted “The Scottish Ministers”,
(iii)Section D is to be read as if the last sentence were omitted,
(f)in Annex 5, in Section A, footnotes (1) and (2) to the table are to be read as if for “a Member State” in each place, there were substituted “the United Kingdom”,
(g)in Annex 6, Section B is to be read as if—
(i)in paragraph 1—
(aa)for “A Member State” there were substituted “The Scottish Ministers”,
(bb)for “it” there were substituted “they”,
(cc)for “Member State concerned” there were substituted “Scottish Ministers”,
(ii)paragraphs 2, 3 and 4 were omitted,
(h)in Annex 8, in Section A, the paragraph after the table is to be read as if after the words “in the Community” there were inserted “in so far as it forms part of [F6assimilated] law”.]
Textual Amendments
3. The Scottish Ministers are designated as the competent authority for the purposes of Directive 2008/50/EC (other than for the purpose specified in Article 3(f) of that Directive) and for the purposes of Directive 2004/107/EC.
4.—(1) The Scottish Ministers must, for the purposes of these Regulations, divide the territory of Scotland into zones and agglomerations.
(2) A zone is classified as an agglomeration if it is a conurbation with a population in excess of 250,000 inhabitants.
(3) Unless the context otherwise requires, in these Regulations references to a zone includes a zone which has been classified as an agglomeration.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Executive Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2005 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: