- Latest available (Revised)
- Point in Time (11/06/2010)
- Original (As made)
Point in time view as at 11/06/2010.
There are currently no known outstanding effects for the The Air Quality Standards (Scotland) Regulations 2010, CHAPTER 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
5.—(1) The Scottish Ministers must classify each zone according to whether or not the upper or lower assessment thresholds specified in Section A of Annex II to Directive 2008/50/EC are exceeded in relation to sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter, lead, benzene and carbon monoxide.
(2) The Scottish Ministers must review the classification of zones carried out in accordance with paragraph (1) at least every five years, and must do so more frequently than every five years if there are significant changes in the activities which may affect levels of sulphur dioxide, nitrogen dioxide or oxides of nitrogen, particulate matter, lead, benzene or carbon monoxide in ambient air.
(3) When reviewing the classification of zones in accordance with assessment thresholds, the Scottish Ministers must comply with Section B of Annex II to Directive 2008/50/EC.
6.—(1) The Scottish Ministers must assess the level of sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter, lead, benzene and carbon monoxide in ambient air in all zones.
(2) In all zones where the level of any pollutant mentioned in paragraph (1) exceeds the upper assessment threshold for that pollutant referred to in regulation 5, fixed measurements must be used in relation to that pollutant, but may be supplemented by modelling or indicative measurements or both in order to provide adequate information on the spatial distribution of the ambient air quality.
(3) In all zones where the level of any pollutant mentioned in paragraph (1) is below the lower assessment threshold for that pollutant referred to in regulation 5, modelling or estimation techniques or both may be used instead of fixed measurements in relation to that pollutant.
(4) In zones where the level of any pollutant mentioned in paragraph (1) is at or between the upper and lower assessment thresholds for that pollutant, a combination of fixed measurements together with modelling or indicative measurements or both may be used in relation to that pollutant.
(5) In addition to the measurements referred to in paragraphs (1) to (4), the Scottish Ministers must measure PM2.5 at rural background locations away from significant sources of air pollution, in order to provide information on an annual average basis on the total mass concentration and chemical speciation concentrations of that pollutant.
(6) For the purposes of paragraphs (1) to (5), measurements must be carried out in accordance with the data quality objectives set out in Sections A and C of Annex I to Directive 2008/50/EC, and for the purposes of paragraph (5), measurements must also be carried out in accordance with the criteria set out in Annex IV to the same Directive.
(7) Save as provided for in paragraph (8), measurements for the purposes of this regulation must be taken in accordance with the reference measurement methods specified in Sections A and Section C of Annex VI to Directive 2008/50/EC.
(8) Alternative methods to those referred to in paragraph (7) may be used provided the conditions set out in Section B of that Annex are complied with.
(9) Where measurements are supplemented by modelling or indicative measurements the Scottish Ministers must take account of the results of those supplementary methods in assessing ambient air quality for the purposes of these Regulations.
(10) In this regulation, “chemical speciation concentrations” means the concentrations of different chemical components or species of PM2.5.
7.—(1) The Scottish Ministers must install sampling points in accordance with Schedule 1 for the assessment of sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter, lead, benzene and carbon monoxide.
(2) In zones where fixed measurements are the sole source of information for the assessment of air quality in relation to any pollutant mentioned in paragraph (1), the number of sampling points for that pollutant must be more than or equal to the minimum number specified in Section A of Annex V to Directive 2008/50/EC for the purpose of assessing compliance with limit values and alert thresholds.
(3) In zones other than agglomerations where fixed measurement is the sole source of information for the assessment of air quality in relation to sulphur dioxide or oxides of nitrogen, the number of sampling points for that pollutant must be more than or equal to the minimum number specified in Section C of Annex V to Directive 2008/50/EC for the purpose of assessing compliance with critical levels for the protection of vegetation.
(4) In zones where the information from fixed measurements is supplemented by information from modelling or indicative measurements or both—
(a)the number of sampling points specified in Section A of Annex V may be reduced by up to 50 per cent provided that the following conditions are met:—
(i)the supplementary methods provide sufficient information for the assessment of air quality in relation to limit values or alert thresholds;
(ii)the supplementary methods provide sufficient information to inform the public as to the state of ambient air quality; and
(iii)the number of sampling points to be installed and the spatial resolution of other techniques are sufficient for the concentration of the relevant pollutant to be established in accordance with the data quality objectives specified in Section A of Annex I to Directive 2008/50/EC and to enable assessment results to meet the criteria in Section B of that Annex; and
(b)the number of sampling points in Section C of Annex V to Directive 2008/50/EC may be reduced by up to 50 per cent provided that the assessed concentrations of the relevant pollutant can be established in accordance with the data quality objectives specified in Section A of Annex I to Directive 2008/50/EC.
(5) For the measurement of PM2.5 in rural background locations, the Scottish Ministers must install a sampling point for every 100,000km2.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Executive Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2005 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: