- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As made)
Point in time view as at 31/12/2020.
The Pollution Prevention and Control (Scotland) Regulations 2012, Paragraph 10 is up to date with all changes known to be in force on or before 25 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
10.—(1) The operator of a solvents installation must on request provide SEPA with such information as it may reasonably request to verify compliance under [F1sub-paragraphs 3 to 6] with—
(a)emission limit values in waste gases, fugitive emission limit values and total emission limit values, or
(b)the requirements of any reduction scheme.
(2) Information may be provided in a [F2plan equivalent to a] solvent management plan prepared under Part 7 of Annex VII to the Industrial Emissions Directive.
[F3(3) In the case of continuous measurements the emission limit values must be considered to be complied with if—
(a)none of the arithmetic averages of all valid readings taken during any 24 hour period of operation of an installation or activity except start-up and shut-down operations and maintenance of equipment exceeds the emission limit values,
(b)none of the hourly averages exceeds the emission limit values by more than a factor of 1.5.
(4) In the case of periodic measurements the emission limit values must be considered to be complied with if, in one monitoring exercise—
(a)the average of all the measurement values does not exceed the emission limit values,
(b)none of the hourly averages exceeds the emission limit values by more than a factor of 1.5.
(5) Compliance with requirements derived from Part 4 of Annex VII to the Industrial Emissions Directive must be verified on the basis of the sum of the mass concentrations of the individual volatile organic compounds concerned. For all other cases, compliance must be verified on the basis of the total mass of organic carbon emitted unless otherwise based on a limit derived from Part 2 of Annex VII to the Industrial Emissions Directive.
(6) Gas volumes may be added to the waste gas for cooling or dilution purposes where technically justified but must not be considered when determining the mass concentration of the pollutant in the waste gas.]
Textual Amendments
F1Words in Sch. 2 para. 10(1) substituted (31.12.2020) by The Environment (EU Exit) (Scotland) (Amendment etc.) Regulations 2019 (S.S.I. 2019/26), regs. 1, 13(24)(d)(i); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in Sch. 2 para. 10(2) inserted (31.12.2020) by The Environment (EU Exit) (Scotland) (Amendment etc.) Regulations 2019 (S.S.I. 2019/26), regs. 1, 13(24)(d)(ii); 2020 c. 1, Sch. 5 para. 1(1)
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Policy Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2012 onwards. Prior to this date these type of notes existed as ‘Executive Notes’ and accompanied Scottish Statutory Instruments from July 2005 until July 2012.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: