- Latest available (Revised)
- Point in Time (20/03/2024)
- Original (As made)
Point in time view as at 20/03/2024.
The Utilities Contracts (Scotland) Regulations 2016, CHAPTER 3 is up to date with all changes known to be in force on or before 14 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
56.—(1) Before commencing a procurement, a utility may conduct a market consultation with a view to preparing the procurement and informing economic operators of the utility’s procurement plans and requirements.
(2) For this purpose, a utility may act as it considers appropriate, including seeking or accepting advice from independent experts or authorities or from market participants.
(3) Such advice may be used in the planning and conduct of the procurement, provided that it does not have the effect of distorting competition and does not result in a violation of the principles of non-discrimination and transparency.
57.—(1) A utility must take appropriate measures to ensure that competition is not distorted by the participation of a candidate or tenderer where that candidate or tenderer, or an undertaking related to that candidate or tenderer—
(a)has advised the utility, whether in the context of regulation 56 (preliminary market consultation) or not; or
(b)has otherwise been involved in the preparation of the procurement.
(2) Such measures must include—
(a)the communication to the other candidates and tenderers of relevant information exchanged in the context of or resulting from the involvement of the candidate or tenderer in the preparation of the procurement; and
(b)the fixing of adequate time limits for the receipt of tenders.
(3) A candidate or tenderer in a situation referred to in paragraph (1) may only be excluded from the procedure for the purposes of paragraph (1) where there are no other means to ensure compliance with the duty referred to in regulation 34(1) (principles of procurement).
(4) Prior to any such exclusion, a candidate or tenderer must be given the opportunity to prove that their involvement in preparing the procurement is not capable of distorting competition.
(5) The measures taken must be documented in the report referred to in regulation 96 (reporting and documentation requirements).
58.—(1) The technical specifications must—
(a)be set out in the procurement documents; and
(b)lay down the characteristics required of any works, supply or service.
(2) In the case of a works contract, technical specifications define any characteristics required of a material, product or supply so that it fulfils the use for which it is intended by the utility.
(3) The characteristics referred to in paragraph (2) may include—
(a)levels of environmental and climate performance;
(b)design for all requirements (including accessibility for disabled persons) and conformity assessment;
(c)performance, safety or dimensions, including the procedures concerning quality assurance;
(d)terminology;
(e)symbols;
(f)testing and test methods;
(g)packaging, marking and labelling;
(h)user instructions;
(i)production processes and methods at any stage of the life cycle of the works;
(j)rules relating to design and costing and the test, inspection and acceptance conditions for works; and
(k)methods or techniques of construction and all other technical conditions which the utility is in a position to prescribe, under general or specific regulations, in relation to the finished works and to the materials or parts which they involve.
(4) In the case of a supply or service contract, the required characteristics may include—
(a)quality levels;
(b)environmental and climate performance levels;
(c)design for all requirements (including accessibility for disabled persons) and conformity assessment;
(d)performance, use of the product, safety or dimensions, including requirements relevant to the product as regards the name under which the product is sold;
(e)terminology;
(f)symbols;
(g)testing and test methods;
(h)packaging, marking and labelling;
(i)user instructions;
(j)production processes and methods at any stage of the life cycle of the supply or service; and
(k)conformity assessment procedures.
(5) In the case of any contract, the required characteristics may also refer to—
(a)the specific process or method of production or provision of the requested works, supplies or services;
(b)a specific process for another stage of its life cycle,
even where such factors do not form part of the contract’s material substance provided that they are linked to the subject-matter of the contract and proportionate to its value and its objectives.
(6) The technical specifications may also specify whether the transfer of intellectual property rights will be required.
(7) Where the subject of the procurement is intended for use by natural persons, whether the general public or staff of the utility, the technical specifications must, except in duly justified cases, be drawn up so as to take into account accessibility criteria for persons with disabilities or design for all users.
(8) Where mandatory accessibility requirements are [F1imposed by [F2assimilated] law], technical specifications must, as far as accessibility criteria for persons with disabilities or design for all users are concerned, be defined by reference thereto.
(9) Technical specifications must afford equal access of economic operators to the procurement and must not have the effect of creating unjustified obstacles to the opening up of procurement to competition.
(10) Without prejudice to mandatory national technical rules, to the extent that they are compatible with [F3assimilated] law, the technical specifications must be formulated—
(a)in terms of performance or functional requirements, including environmental characteristics, provided that the parameters are sufficiently precise to allow tenderers to determine the subject-matter of the contract and to allow the utility to award the contract;
(b)by reference to any of the following technical specifications in the following order of precedence—
(i)national standards transposing European standards;
(ii)European Technical Assessments;
(iii)common technical specifications;
(iv)international standards;
(v)other technical reference systems established by the European standardisation bodies; or
(vi)when none of the above exist, national standards, national technical approvals or national technical specifications relating to the design, calculation and execution of the works and use of the supplies,
but each reference must be accompanied by the words ‘or equivalent’;
(c)in terms of performance or functional requirements as referred to in sub-paragraph (a), with reference to the technical specifications referred to in sub-paragraph (b) as a means of presuming conformity with such performance or functional requirements; or
(d)by reference to the technical specifications referred to in sub-paragraph (b) for certain characteristics and by reference to the performance or functional requirements referred to in sub-paragraph (a) for other characteristics.
(11) Subject to paragraph (12), technical specifications must not, with the effect of favouring or eliminating certain undertakings or certain products, refer to—
(a)a specific make or source;
(b)a particular process which characterises the products or services provided by a specific economic operator; or
(c)trade marks, patents, types, or a specific origin or production.
(12) Reference of a kind referred to in paragraph (11) is permitted in any of the following circumstances—
(a)where justified by the subject-matter of the contract;
(b)on an exceptional basis, where a sufficiently precise and intelligible description of the subject-matter of the contract pursuant to paragraph (10) is not possible, in which case the reference must be accompanied by the words “or equivalent”.
(13) Where a utility formulates technical specifications in terms of performance or functional requirements in accordance with paragraph (10)(a), it must not reject a tender for works, supplies or services which complies with a technical specification of a kind mentioned in paragraph (10)(b)(i) to (v), where those specifications address the performance or functional requirements which it has laid down.
(14) Where a utility formulates technical specifications in accordance with paragraph (10)(b), it must not reject a tender on the grounds that the works, supplies or services tendered for do not comply with the technical specifications to which it has referred, where the tenderer proves in its tender by any appropriate means, including the means of proof referred to in regulation 60 (test reports, certificates and other means of proof), that the solution proposed satisfies in an equivalent manner the requirements defined by the technical specifications.
(15) In its tender, the tenderer must prove by any appropriate means, including those referred to in regulation 60 (test reports, certificates and other means of proof), that the works, supply or service in compliance with the standard meets the performance or functional requirements of the utility.
Textual Amendments
F1Words in reg. 58(8) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(35)(a) (with sch. paras. 1-5)
F2Word in reg. 58(8) substituted (1.1.2024) by The Retained EU Law (Revocation and Reform) Act 2023 (Consequential Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/374), reg. 1(1), sch. 2 para. 30(2)(a)
F3Word in reg. 58(10) substituted (1.1.2024) by The Retained EU Law (Revocation and Reform) Act 2023 (Consequential Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/374), reg. 1(1), sch. 2 para. 30(2)(b)
Commencement Information
59.—(1) Where a utility intends to purchase works, supplies or services with specific environmental, social or other characteristics the utility may, in the technical specifications, the award criteria or the contract performance conditions, require a specific label as means of proof that the works, supplies or services correspond to the required characteristics, provided that all of the following conditions are fulfilled—
(a)the label requirements only concern criteria which are linked to the subject-matter of the contract and are appropriate to define characteristics of the works, supplies or services;
(b)the label requirements are based on objectively verifiable and non-discriminatory criteria;
(c)the label is established in an open and transparent procedure in which all relevant stakeholders, including government bodies, consumers, social partners, manufacturers, distributors and non-governmental organisations, may participate;
(d)the label is accessible to all interested parties; and
(e)the label requirements are set by a third party over whom the economic operator applying for the label cannot exercise a decisive influence.
(2) Where a utility does not require the works, supplies or services to meet all of the label requirements, the utility must indicate which label requirements are required.
(3) A utility requiring a specific label must accept all labels that confirm that the works, supplies or services meet equivalent label requirements.
(4) Where an economic operator had demonstrably no possibility of obtaining the specific label indicated by the utility, or an equivalent label, within the relevant time limits for reasons that are not attributable to that economic operator, the utility must accept other appropriate means of proof, which may include a technical dossier from the manufacturer, provided that the economic operator concerned proves that the works, supplies or services to be provided by it fulfil the requirements of the specific label or the specific requirements indicated by the utility.
(5) Where a label fulfils the conditions mentioned in paragraph (1)(b) to (e) but also sets out requirements not linked to the subject-matter of the contract, a utility must not require the label but may define the technical specification by reference to those of the detailed specifications of that label or, parts of it where necessary, that are linked to the subject-matter of the contract and are appropriate to define characteristics of that subject-matter.
60.—(1) A utility may require an economic operator to provide a test report from a conformity assessment body or a certificate issued by such a body as means of proof of conformity with requirements or criteria set out in the technical specifications, the award criteria or the contract performance conditions.
(2) Where a utility requires the submission of certificates drawn up by a specific conformity assessment body, certificates from other equivalent conformity assessment bodies must also be accepted by the utility.
(3) In paragraphs (1) and (2), “conformity assessment body” means a body that performs conformity assessment activities including calibration, testing, certification and inspection accredited in accordance with Regulation (EC) No 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 (1).
(4) Where the economic operator concerned has no access to the certificates or test reports referred to in paragraphs (1) and (2), or no possibility of obtaining them within the relevant time limits, a utility must accept appropriate means of proof other than those referred to in paragraphs (1) and (2), such as a technical dossier of the manufacturer, provided that—
(a)the lack of access is not attributable to the economic operator concerned; and
(b)the means of proof provided by the economic operator concerned proves that the works, supplies or services provided by it meet the requirements or criteria set out in the technical specifications, the award criteria or the contract performance conditions.
61.—(1) On request from an economic operator interested in obtaining a contract, a utility must make available—
(a)the technical specifications regularly referred to in their works, supplies or [F4service] contracts; F5...
F5(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(2) Subject to paragraph (3), the technical specifications referred to in paragraph (1) must be made available by electronic means of communication through unrestricted and full direct access free of charge.
(3) Technical specifications must be transmitted by means other than electronic means where unrestricted and full direct access free of charge by electronic means to certain procurement documents cannot be offered—
(a)for one of the reasons set out in regulations 38(3) or (5) (rules applicable to communication); or
(b)because the utility intends to apply regulation 37(3) (confidentiality).
(4) Where the technical specifications are based on documents available by electronic means through unrestricted and full direct access free of charge to interested economic operators, the inclusion of a reference to those documents must be sufficient.
Textual Amendments
F4Word in reg. 61(1)(a) substituted (1.7.2019) by The Public Procurement etc. (Miscellaneous Amendments) (Scotland) Regulations 2019 (S.S.I. 2019/173), regs. 1(2), 2(5)
F5Reg. 61(1)(b) and word omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(15) (with reg. 3)
Commencement Information
62.—(1) A utility may authorise or require tenderers to submit variants which meet the minimum requirements laid down by the utility.
(2) A utility must indicate in the procurement documents whether or not they authorise or require variants.
(3) A utility authorising or requiring variants must state in the procurement documents the minimum requirements to be met by the variants and any specific requirements for their presentation, in particular whether variants may be submitted only where the economic operator also submits a tender which is not a variant.
(4) A utility must not take into consideration a variant which—
(a)has not been authorised or required;
(b)is not linked to the subject matter of the contract; or
(c)does not meet the minimum requirements laid down by the utility.
(5) A utility must ensure that the award criteria can be applied to variants meeting those minimum requirements as well as to tenders which are not variants.
(6) In a procedure for awarding a supply contract or service contract, a utility that has authorised or required variants must not reject a variant on the sole ground that it would, where successful, lead to either a service contract rather than a supply contract or a supply contract rather than a service contract.
63.—(1) A utility may decide to award a contract in the form of separate lots and may determine the size and subject-matter of such lots.
(2) Where a utility decides to award a contract in the form of separate lots it must indicate in the contract notice F6... or, where the means of a call for competition is a notice on the existence of a qualification system, in the invitation to tender or negotiate, whether tenders may be submitted for one, for several or for all of the lots.
(3) A utility may, even where tenders may be submitted for several or all lots, limit the number of lots that may be awarded to one tenderer, provided that the maximum number of lots per tenderer is stated in the contract notice or in the invitation F7... to tender or to negotiate.
(4) A utility must indicate in the procurement documents the objective and non‑discriminatory criteria or rules it intends to apply for determining which lots will be awarded where the application of the award criteria would result in one tenderer being awarded more lots than the maximum number.
(5) Where more than one lot may be awarded to the same tenderer, a utility may award contracts combining several or all lots where the utility has—
(a)specified in the contract notice or in the invitation F8... to tender or to negotiate that it reserves the possibility of doing so; and
(b)indicated the lots or groups of lots that may be combined.
Textual Amendments
F6Words in reg. 63(2) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(16)(a) (with reg. 3)
F7Words in reg. 63(3) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(16)(b) (with reg. 3)
F8Words in reg. 63(5)(a) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(16)(c) (with reg. 3)
Commencement Information
64.—(1) When fixing the time limits for the receipt of tenders and requests to participate, a utility must take account of the complexity of the contract and the time required for drawing up tenders, without prejudice to the minimum time limits set out in regulations 43 to 47.
(2) Where tenders can be made only after a visit to the site or after on-the-spot inspection of the documents supporting the procurement documents, the time limits for the receipt of tenders, which shall be longer than the minimum time limits set out in regulations 43 to 47, must be fixed so that all economic operators concerned may be aware of all the information needed to produce tenders.
(3) A utility must extend the time limits for the receipt of tenders, so that all economic operators concerned may be aware of all the information needed to produce tenders, where—
(a)for whatever reason, additional information, although requested by the economic operator in good time, is not supplied at the latest 6 days before the time limit fixed for the receipt of tenders; or
(b)significant changes are made to the procurement documents.
(4) In the case of an accelerated open procedure, the period mentioned in paragraph (3)(a) shall be 4 days.
(5) The length of the extension given pursuant to paragraph (3) must be proportionate to the importance of the information or change.
(6) A utility is not required to extend the time limit where—
(a)additional information has not been requested in good time; or
(b)the additional information requested is of insignificant importance with a view to preparing responsive tenders.
65.—(1) A utility may make known its intentions of a planned procurement through the publication of a periodic indicative notice.
(2) A periodic indicative notice must contain the information set out in section I of Part A of Annex VI to the Utilities Contracts Directive [F9, but as if both references to “dispatch of the notice” in paragraph 4 were references to the submission of the notice to the UK e-notification service for the purposes of these Regulations].
(3) A utility wishing to publish a periodic indicative notice must—
(a)[F10submit] it for publication in accordance with regulation 69 ([F11publication on the UK e-notification service]); or
(b)publish it on the utility’s buyer profile in accordance with regulation 70 (publication at national level).
(4) Where the utility intends to publish the periodic indicative notice on its buyer profile, the utility must [F12submit] for publication, in accordance with regulation 69 ([F13publication on the UK e-notification service]), a notice of the publication on its buyer profile.
(5) The notice of publication referred to in paragraph (4) must contain the information set out in Part B of Annex VI to the Utilities Contracts Directive [F14, but as if “date of dispatch” in paragraph 5 were a reference to the date on which the notice is submitted to the UK e-notification service for the purposes of these Regulations].
F15(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F16(7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(8) [F17The] period covered by a periodic indicative notice must be a maximum of 12 months from the date on which the notice is sent for publication.
F18(9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F9Words in reg. 65(2) inserted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(36)(a) (with sch. paras. 1-5)
F10Word in reg. 65(3)(a) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(36)(b)(i) (with sch. paras. 1-5)
F11Words in reg. 65(3)(a) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(36)(b)(ii) (with sch. paras. 1-5)
F12Word in reg. 65(4) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(36)(c)(i) (with sch. paras. 1-5)
F13Words in reg. 65(4) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(36)(c)(ii) (with sch. paras. 1-5)
F14Words in reg. 65(5) inserted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(36)(d) (with sch. paras. 1-5)
F15Reg. 65(6) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(17)(a) (with reg. 3)
F16Reg. 65(7) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(17)(a) (with reg. 3)
F17Word in reg. 65(8) substituted (30.5.2023) by The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(17)(b) (with reg. 3)
F18Reg. 65(9) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(17)(c) (with reg. 3)
Commencement Information
66.—(1) This regulation applies where a utility chooses to set up a qualification system in accordance with regulation 75 (qualification systems).
(2) The qualification system must be the subject of a notice F19..., indicating the purpose of the qualification system and how to have access to the rules concerning its operation.
[F20(2A) Such a notice must include the information set out in Annex X to the Utilities Contracts Directive, but as if, in paragraph 10, “Article 82” were a reference to regulation 80 of these Regulations.]
(3) The utility must—
(a)indicate the period of validity of the qualification system in the notice on the existence of the system; and
(b)[F21give notice] of any change in the period of validity.
(4) The notification in paragraph (3)(b) must be made by [F22submitting to the UK e-notification service]—
(a)where the period of validity is changed without terminating the system, [F23a notice] on the existence of qualification systems; and
(b)where the system is terminated, a contract award notice referred to in regulation 68 (contract award notices).
Textual Amendments
F19Words in reg. 66(2) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(37)(a) (with sch. paras. 1-5)
F20Reg. 66(2A) inserted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(37)(b) (with sch. paras. 1-5)
F21Words in reg. 66(3)(b) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(37)(c) (with sch. paras. 1-5)
F22Words in reg. 66(4) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(37)(d)(i) (with sch. paras. 1-5)
F23Words in reg. 66(4)(a) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(37)(d)(ii) (with sch. paras. 1-5)
Commencement Information
67.—(1) A contract notice must contain the information set out in the relevant part of Annex XI to the Utilities Contracts Directive, but as if—
(a)in paragraph 10 of Part A, “the third and fourth sub-paragraph of Article 73(1)” were a reference to regulation 71(4) and (5) of these Regulations (electronic availability of procurement documents)”,
(b)in—
(i)paragraph 19 of Part A,
(ii)paragraph 16 of Part B,
(iii)paragraph 15 of Part C,
“Article 82” were a reference to regulation 80 of these Regulations,
(c)in—
(i)paragraph 20 of Part A,
(ii)paragraph 18 of Part B,
(iii)paragraph 18 of Part C,
“in the Official Journal of the European Union” read “on the UK e-notification service (within the meaning of the Utilities Contracts (Scotland) Regulations 2016)”, and
(d)in—
(i)paragraph 22 of Part A,
(ii)paragraph 20 of Part B,
(iii)paragraph 20 of Part C,
“date of dispatch” were a reference to the date on which the notice is submitted to the UK e-notification service for the purposes of these Regulations.
(2) Such notices must be submitted for publication in accordance with regulation 69 (publication on the UK e-notification service).]
Textual Amendments
F24Reg. 67 substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(38) (with sch. paras. 1-5)
68.—(1) Not later than 30 days after the award of a contract or conclusion of a framework agreement, a utility must [F25submit] for publication in accordance with regulation 69 ([F26publication on the UK e-notification service]) a contract award notice on the results of the procurement.
[F27(2) A contract award notice must—
(a)contain the information set out in Annex XII to the Utilities Contracts Directive, but as if—
(i)in paragraph 5(b), “in the Official Journal of the European Union” read “on the UK e-notification service (within the meaning of the Utilities Contracts (Scotland) Regulations 2016)”,
(ii)in paragraph 5(c), “Article 50” were a reference to regulation 48 (use of the negotiated procedure without prior call for competition) of these Regulations,
(iii)in paragraph 9, “Article 50(h)” were a reference to regulation 48(4)(d) of these Regulations,
[F28(iiia)in paragraph 12, for the words from “or the prices” to the end there were substituted “for the contract awarded”,]
(iv)in paragraph 17, the words in brackets were omitted,
(v)in paragraph 19, “Article 64(1)” were a reference to regulation 62(1) (variants) of these Regulations,
(vi)in paragraph 20, “Article 84” were a reference to regulation 82 (abnormally low tenders) of these Regulations,
(vii)in paragraph 21, “date of transmission” were a reference to the date on which the notice is submitted to the UK e-notification service for the purposes of these Regulations, and
(b)be submitted for publication in accordance with regulation 69 (publication on the UK e-notification service).]
F29(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) In accordance with paragraph (5), a utility must [F30submit] for publication a contract award notice in respect of the award of a supply, service or works contract based on a framework agreement if the estimated value of the contract under the framework is equal to or greater than the threshold referred to in regulation 15(1) (thresholds) applicable to that type of contract.
(5) The utility must [F31submit] such notices for publication in accordance with regulation 69 ([F32publication on the UK e-notification service]) on a quarterly basis, within 30 days of the end of each quarter.
(6) In the case of the award of a contract based upon a dynamic purchasing system, a utility must either—
(a)[F33submit] for publication in accordance with regulation 69 ([F34publication on the UK e-notification service]) a contract award notice within 30 days after the award of each such contract; or
(b)group notices referred to in sub-paragraph (a) on a quarterly basis, in which case the utility must [F35submit] for publication in accordance with regulation 69 ([F34publication on the UK e-notification service]) the grouped notices within 30 days of the end of each quarter.
(7) A utility may withhold from publication information on the contract award or the conclusion of the framework agreement where the release of the information—
(a)would impede law enforcement or otherwise be contrary to the public interest;
(b)would prejudice the commercial interests of any person; or
(c)might prejudice fair competition between economic operators.
(8) In the case of contracts for research and development services, the information in paragraph (2) concerning the nature and quantity of the services may be limited to—
(a)where the contract has been awarded by a negotiated procedure without a call for competition in accordance with regulation 48(1)(b) (use of the negotiated procedure without prior call for competition), the indication “R & D Services”; and
(b)where the contract has been awarded by a procedure with a call for competition, information at least as detailed as was indicated in the notice that was used as a means of calling for competition.
Textual Amendments
F25Word in reg. 68(1) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(a)(i) (with sch. paras. 1-5)
F26Words in reg. 68(1) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(a)(ii) (with sch. paras. 1-5)
F27Reg. 68(2) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(b) (with sch. paras. 1-5)
F28Reg. 68(2)(a)(iiia) inserted (coming into force in accordance with s. 7(1) of the amending Act) by Trade (Comprehensive and Progressive Agreement for Trans-Pacific Partnership) Act 2024 (c. 6), Sch. para. 18 (with Sch. paras. 23-26)
F29Reg. 68(3) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(18) (with reg. 3)
F30Word in reg. 68(4) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(c) (with sch. paras. 1-5)
F31Word in reg. 68(5) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(c) (with sch. paras. 1-5)
F32Words in reg. 68(5) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(d) (with sch. paras. 1-5)
F33Word in reg. 68(6)(a) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(c) (with sch. paras. 1-5)
F34Words in reg. 68(6) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(d) (with sch. paras. 1-5)
F35Word in reg. 68(6)(b) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(39)(c) (with sch. paras. 1-5)
Commencement Information
69.—(1) The notices required by regulations 65 to 68 to be [F37submitted] for publication in accordance with this regulation must—
(a)be [F37submitted] [F38to the UK e-notification service] for publication; F39...
F39(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(2) A utility must ensure that it is able to supply proof of the dates on which notices are [F40submitted to the UK e-notification service] for publication.
(3) Where the [F41provider of the UK e-notification service] has given the utility confirmation of F42... the publication of the information [F43submitted], indicating the date of that publication, that confirmation shall constitute proof of publication.
(4) A utility may [F44submit] notices in respect of works, supply or service contracts to the [F45UK e-notification service] for publication even where the utility is not required to do so by these Regulations F46....
[F47(5) In these Regulations, “the UK e-notification service” has the meaning given by regulation 52(5) of the Public Contracts (Scotland) Regulations,
(6) For the purposes of these Regulations, a notice of any description is submitted to the UK e-notification service if the information comprising the notice is entered in the portal in such form or manner as the portal requires and in compliance with any specific instructions given within the portal about the entry of information or any part of it.]
Textual Amendments
F36Reg. 69 heading substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(a) (with sch. paras. 1-5)
F37Word in reg. 69(1) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(b)(i) (with sch. paras. 1-5)
F38Words in reg. 69(1) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(b)(ii) (with sch. paras. 1-5)
F39Reg. 69(1)(b) and word omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(b)(iii) (with sch. paras. 1-5)
F40Words in reg. 69(2) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(c) (with sch. paras. 1-5)
F41Words in reg. 69(3) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(d)(i) (with sch. paras. 1-5)
F42Words in reg. 69(3) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(d)(ii) (with sch. paras. 1-5)
F43Word in reg. 69(3) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(d)(iii) (with sch. paras. 1-5)
F44Word in reg. 69(4) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(e)(i) (with sch. paras. 1-5)
F45Words in reg. 69(4) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(e)(ii) (with sch. paras. 1-5)
F46Words in reg. 69(4) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(e)(iii) (with sch. paras. 1-5)
F47Reg. 69(5)(6) inserted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(40)(f) (with sch. paras. 1-5)
Commencement Information
70.—(1) In addition to the publication of the notices referred to in regulations [F4950 and] 65 to 68 [F50on the UK e-notification service], a utility may publish the information contained in such notices on the internet on a buyer profile.
(2) A buyer profile may also include—
(a)periodic indicative notices which are published on it pursuant to regulation 65(3)(b) (periodic indicative notices);
(b)information on on-going invitations to tender, scheduled purchases, contracts concluded, procedures cancelled; and
(c)any useful general information, such as a contact point, telephone and fax number, postal address and e-mail address.
(3) The notices referred to in regulations [F5150 and] 65 to 68, and the information contained in them, must not be published [F52otherwise than on the UK e-notification service before they are published on that service.]
(4) Notwithstanding paragraph (3), publication may take place [F53otherwise than on the UK e-notification service] where a utility has not been notified of the publication [F54on that service within 48 hours after the notice was submitted to that service].
(5) A notice published [F55otherwise than on the UK e-notification service] must not contain information other than that contained in the notice [F56submitted to that service] or published on a buyer profile, but must indicate the date of [F57submission of the notice to that service] or its publication on the buyer profile.
(6) Where a periodic indicative notice is to be published on a buyer profile—
(a)the periodic indicative notice may not be so published before the utility [F58submits to the UK e-notification service] the notice referred to in regulation 65(4) (periodic indicative notices); and
(b)the periodic indicative notice must indicate the date of that [F59submission].
Textual Amendments
F48Words in reg. 70 heading substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(a) (with sch. paras. 1-5)
F49Words in reg. 70(1) inserted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(b)(i) (with sch. paras. 1-5)
F50Words in reg. 70(1) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(b)(ii) (with sch. paras. 1-5)
F51Words in reg. 70(3) inserted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(c)(i) (with sch. paras. 1-5)
F52Words in reg. 70(3) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(c)(ii) (with sch. paras. 1-5)
F53Words in reg. 70(4) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(d)(i) (with sch. paras. 1-5)
F54Words in reg. 70(4) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(d)(ii) (with sch. paras. 1-5)
F55Words in reg. 70(5) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(e)(i) (with sch. paras. 1-5)
F56Words in reg. 70(5) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(e)(ii) (with sch. paras. 1-5)
F57Words in reg. 70(5) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(e)(iii) (with sch. paras. 1-5)
F58Words in reg. 70(6)(a) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(f)(i) (with sch. paras. 1-5)
F59Word in reg. 70(6)(b) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(41)(f)(ii) (with sch. paras. 1-5)
Commencement Information
71.—(1) Subject to paragraph (2), a utility must offer on the internet unrestricted and full direct access free of charge to the procurement documents from the date of publication of a notice in accordance with regulation 69 ([F60publication on the UK e-notification service]) F61....
(2) Where the means of calling for competition is a notice on the existence of a qualification system, the access referred to in paragraph (1) must be offered as soon as possible and at the latest when the invitation to tender or to negotiate is sent.
(3) The text of the notice or the invitation must specify the internet address at which the procurement documents are accessible.
(4) Where unrestricted and full direct access free of charge by electronic means to certain procurement documents cannot be offered for one of the reasons set out in regulation 38(3) (rules applicable to communication), a utility may indicate in the notice F62... that the procurement documents concerned will be transmitted by means other than electronic means in accordance with the periods mentioned in paragraphs (7) and (8).
(5) Where unrestricted and full direct access free of charge by electronic means to certain procurement documents cannot be offered because a utility intends to apply regulation 37(3) (confidentiality), the utility must indicate, in one of the following, which measures, aimed at protecting the confidential nature of the information, the utility requires and how access can be obtained to the documents—
(a)the notice;
F63(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(c)where the means of calling for competition is a notice on the existence of a qualification system, the procurement documents.
(6) Where paragraph (4) or (5) applies, the time limit for the submission of tenders must be extended by 5 days, except—
(a)in a case of duly substantiated urgency referred to in regulation 43(5) (open procedure); or
(b)where the time limit is set by mutual agreement in accordance with regulation 44(6) (restricted procedure) or 45(6) (negotiated procedure with prior call for competition).
(7) Provided that it has been requested in good time, a utility must supply to all tenderers taking part in the procurement additional information relating to the specifications and any supporting documents, not later than 6 days before the time limit fixed for the receipt of tenders.
(8) In the case of an accelerated open procedure, the period mentioned in paragraph (7) shall not be later than 4 days before the time limit fixed for the receipt of tenders.
Textual Amendments
F60Words in reg. 71(1) substituted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(42) (with sch. paras. 1-5)
F61Words in reg. 71(1) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(19)(a) (with reg. 3)
F62Words in reg. 71(4) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(19)(b) (with reg. 3)
F63Reg. 71(5)(b) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(19)(c) (with reg. 3)
Commencement Information
72.—(1) In a restricted procedure, a competitive dialogue procedure, an innovation partnership and a negotiated procedure with prior call for competition, an invitation by a utility to selected candidates or to participants to submit a tender must be issued simultaneously and in writing.
(2) In a competitive dialogue procedure, an innovation partnership and a negotiated procedure with or without prior call for competition, an invitation by a utility to selected candidates to participate must be issued simultaneously and in writing.
F64(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) The invitations required by paragraphs (1) [F65and (2)] must—
(a)include a reference to the electronic address at which the procurement documents have been made directly available by electronic means; or
(b)be accompanied by the procurement documents, where those documents have not been the subject of unrestricted and full direct access, free of charge, for the reasons referred to in regulation 71(4) or (5) (electronic availability of procurement documents) and have not already been made otherwise available.
(5) The invitations required by paragraphs (1) and (2) must also contain at least the following information—
(a)where tenders are to be submitted, the deadline for the receipt of the tenders, the address to which the tenders must be sent and the language or languages in which the tenders must be drawn up;
(b)in the case of competitive dialogue, the date and the address set for the start of consultation and the language or languages to be used;
(c)a reference to the call for competition published;
(d)an indication of any documents to be attached;
(e)the criteria for the award of the contract, where they are not indicated in the notice on the existence of a qualification system used as a means of calling for competition;
(f)the relative weighting of criteria for the award of the contract or, where appropriate, the order of importance of such criteria, where they are not given in the contract notice, the notice on the existence of a qualification system or the specifications.
F66(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F64Reg. 72(3) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(20)(a) (with reg. 3)
F65Words in reg. 72(4) substituted (30.5.2023) by The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(20)(b) (with reg. 3)
F66Reg. 72(6) omitted (30.5.2023) by virtue of The Public Procurement (Miscellaneous Amendments) (Scotland) Regulations 2023 (S.S.I. 2023/124), regs. 2, 5(20)(c) (with reg. 3)
Commencement Information
73.—(1) A utility must as soon as possible after reaching a decision concerning the award of a contract, the conclusion of a framework agreement or admittance to a dynamic purchasing system, inform each candidate and tenderer of the decision reached.
(2) Information provided in accordance with paragraph (1) must, where applicable, include the grounds for any decision—
(a)not to conclude a framework agreement;
(b)not to award a contract for which there has been a call for competition;
(c)to recommence the procedure; or
(d)not to implement a dynamic purchasing system.
(3) On request from the candidate or tenderer concerned, the utility must as soon as possible, and in any event within 15 days from receipt of a written request, inform—
(a)any unsuccessful candidate of the reasons for the rejection of its request to participate;
(b)any unsuccessful tenderer of the reasons for the rejection of its tender, including, for the cases referred to in regulation 58(13) and (14) (technical specifications), the reasons for its decision of non-equivalence or its decision that the works, supplies or services do not meet the performance or functional requirements;
(c)any tenderer that has made an admissible tender of the characteristics and relative advantages of the tender selected as well as the name of the successful tenderer or the parties to the framework agreement; and
(d)any tenderer that has made an admissible tender of the conduct and progress of negotiations and dialogue with tenderers.
(4) A utility may decide to withhold certain information referred to in paragraphs (2) and (3), where the release of such information—
(a)would impede law enforcement or otherwise be contrary to the public interest;
(b)would prejudice the commercial interests of any person; or
(c)might prejudice fair competition between economic operators.
(5) A utility which establishes and operates a system of qualification must—
(a)inform applicants of its decision as to qualification within a period of 6 months;
(b)if the decision as to qualification will take longer than 4 months from the presentation of an application, inform the applicant within 2 months of the application of—
(i)the reasons justifying the longer period; and
(ii)the date by which the application will be accepted or refused;
(c)inform applicants whose qualification is refused of the refusal decision and the reasons for that decision as soon as possible and no more than 15 days after the date of the refusal decision.
(6) A utility which establishes and operates a system of qualification must—
(a)base its reasons for decisions as to qualification on the criteria for qualification referred to in regulation 75(3) to (5) (qualification systems); and
(b)only bring the qualification of an economic operator to an end for reasons based on the criteria for qualification referred to in regulation 75(3) to (5) (qualification systems).
(7) Any intention to bring the qualification of an economic operator to an end must be notified in writing to the economic operator at least 15 days before the date on which the qualification is due to end, together with the reasons justifying the proposed action.
74.—(1) For the purpose of selecting participants in their procurement, a utility—
(a)which has provided rules and criteria for the exclusion of tenderers or candidates in accordance with regulations 76(1) (criteria for qualitative selection) or 78 (use of exclusion grounds and selection criteria provided for under the Public Contracts (Scotland) Regulations), must exclude economic operators identified in accordance with such rules and fulfilling such criteria;
(b)must select tenderers and candidates in accordance with the objective rules and criteria mentioned in regulations 76 (criteria for qualitative selection) and 78 (use of exclusion grounds and selection criteria provided for under the Public Contracts (Scotland) Regulations);
(c)must, where appropriate and in accordance with regulation 76(2) and (3) (criteria for qualitative selection), reduce the number of candidates selected in accordance with sub-paragraphs (a) and (b) in—
(i)restricted procedures;
(ii)negotiated procedures with a call for competition;
(iii)competitive dialogues; and
(iv)innovation partnerships.
(2) When a call for competition is made by means of a notice on the existence of a qualification system and for the purpose of selecting participants in a procurement for the specific contracts which are the subject of the call for competition, a utility must—
(a)qualify economic operators in accordance with regulation 75 (qualification systems);
(b)apply to such qualified economic operators those provisions of paragraph (1) that are relevant to restricted or negotiated procedures, to competitive dialogues or to innovation partnerships.
(3) When selecting participants for a restricted or negotiated procedure, a competitive dialogue or an innovation partnership, in reaching its decision as to qualification or when the criteria and rules are being updated, a utility must not—
(a)impose administrative, technical or financial conditions on certain economic operators which would not be imposed on others;
(b)require tests or evidence which would duplicate objective evidence already available.
(4) Where information or documentation to be submitted by an economic operator is or appears to be incomplete or erroneous, or where specific documents are missing, a utility may request the economic operator concerned to submit, supplement, clarify or complete the relevant information or documentation within an appropriate time limit, provided that such requests are made in full compliance with the principles of equal treatment and transparency.
(5) A utility must verify that the tenders submitted by the selected tenderers comply with the rules and requirements applicable to tenders and award the contract on the basis of the criteria laid down in regulations 80 (contract award criteria) and 82 (abnormally low tenders), taking into account regulation 62 (variants).
(6) A utility may decide not to award a contract to, or conclude a framework agreement with, the tenderer submitting the most economically advantageous tender where the utility has established that the tender does not comply with applicable obligations in the fields of environmental, social and employment law established by F67... national law, collective agreements or [F68, subject to paragraphs (6A) and (6B),] by the international environmental, social and employment law provisions listed in Annex XIV to the Utilities Contracts Directive as amended from time to time.
[F69(6A) Where—
(a)the United Kingdom has ratified an international agreement establishing obligations in any of the fields mentioned in paragraph (6), and
(b)the agreement is not already listed,
the Scottish Ministers may make regulations providing that paragraph (6) is to have effect as if the agreement were listed.
(6B) Where the United Kingdom has ceased to ratify an international agreement that is already listed, the Scottish Ministers may make regulations providing that paragraph (6) is to have effect as if the agreement were not listed.
(6C) In paragraphs (6A) and (6B)—
(a)“listed” means listed as described in paragraph (6), and
(b)where paragraph (6) already has effect as if an agreement were listed, “already listed” includes that agreement.]
(7) In open procedures, a utility may decide to examine tenders before verifying the suitability of tenderers, provided that the relevant provisions of regulations 74 to 82 are observed.
Textual Amendments
F67Words in reg. 74(6) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(43)(a)(i) (with sch. paras. 1-5)
F68Words in reg. 74(6) inserted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(43)(a)(ii) (with sch. paras. 1-5)
F69Reg. 74(6A)-(6C) inserted (31.12.2020) by The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(43)(b) (with sch. paras. 1-5)
Commencement Information
75.—(1) A utility may establish and operate a system of qualification of economic operators.
(2) A utility which establishes or operates a system of qualification must ensure that economic operators are at all times able to request qualification.
(3) The system under paragraph (1) may involve different qualification stages.
(4) A utility must establish objective rules and criteria for—
(a)the exclusion and selection of economic operators requesting qualification; and
(b)the operation of the qualification system, covering matters such as—
(i)inscription in the system;
(ii)periodic updating of the qualifications, if any; and
(iii)the duration of the system.
(5) Where the rules and criteria referred to in paragraph (4) include technical specifications, regulations 58 to 60 apply.
(6) The rules and criteria referred to in paragraph (4)—
(a)must be made available to economic operators upon request; and
(b)may be updated as required and, if so, must be communicated to interested economic operators.
(7) Where a utility considers that the qualification system of certain other entities or other bodies meets its requirements, it must communicate the names of those entities and bodies to interested economic operators.
(8) A utility must keep a written record of qualified economic operators, which may be divided into categories according to type of contract for which the qualification is valid.
(9) When a call for competition is made by means of a notice on the existence of a qualification system, specific contracts for the works, supplies or services covered by the qualification system must be awarded by restricted or negotiated procedure, competitive dialogue or innovation partnership as modified so that all tenderers and participants are selected among the candidates already qualified in accordance with such a system without being required to submit further information for qualitative selection or to submit a request to participate.
(10) Any charges that are billed to an economic operator by a utility in connection with requests for qualification or with updating or conserving an already obtained qualification in accordance with the system must be proportionate to the generated costs.
76.—(1) A utility—
(a)may establish objective rules and criteria for the exclusion and selection of tenderers or candidates; and
(b)if so, must make those rules and criteria available to interested economic operators.
(2) Subject to paragraph (3), where a utility needs to ensure an appropriate balance between the particular characteristics of the procurement and the resources required to conduct it, it may, in restricted procedures, negotiated procedures, competitive dialogues or innovation partnerships, establish objective rules and criteria that reflect that need and enable the utility to reduce the number of candidates that will be invited to tender or to negotiate.
(3) A utility must take account of the need to ensure adequate competition when selecting the number of candidates.
77.—(1) This regulation applies where there are objective rules and criteria for the exclusion and selection of—
(a)economic operators requesting qualification in a qualification system; or
(b)candidates and tenderers in open, restricted or negotiated procedures, competitive dialogues or innovation partnerships.
(2) Where the objective rules and criteria for the exclusion and selection of those referred to in paragraph (1) include requirements relating to the economic operator’s economic and financial capacity or technical and professional abilities, an economic operator may, where necessary rely upon the capacities of other entities, regardless of the legal nature of the links which it has with them.
(3) With regard to criteria relating to the educational and professional qualifications of the service provider or contractor or those of the undertaking’s managerial staff or to relevant professional experience, economic operators may only rely upon the capacities of other entities where the latter will perform the works or services for which these capacities are required.
(4) Where an economic operator wants to rely upon the capacities of other entities, it must prove to the utility that the necessary resources will be available to it, for example by producing a commitment by those entities to that effect.
(5) For the purposes of paragraph (4), an economic operator requesting qualification in a qualification system must prove that the necessary resources will be available to it throughout the period of the qualification system.
(6) Where, in accordance with regulation 78 (use of exclusion grounds and selection criteria provided for under the Public Contracts (Scotland) Regulations), a utility has referred to exclusion or selection criteria provided for under the Public Contracts (Scotland) Regulations, the utility must verify, in accordance with the provisions applied by regulation 78(4)—
(a)whether the other entities upon whose capacity the economic operator intends to rely fulfil the relevant selection criteria; or
(b)whether there are grounds for exclusion, to which the utility has referred, under regulation 58 of the Public Contracts (Scotland) Regulations.
(7) The utility—
(a)must require the economic operator to replace an entity which does not meet a relevant selection criterion or in respect of which there are compulsory grounds for exclusion; and
(b)may require the economic operator to substitute an entity in respect of which there are non-compulsory grounds for exclusion.
(8) Where an economic operator relies upon the capacities of other entities with regard to criteria relating to economic and financial standing, the utility may require the economic operator and those entities to be jointly liable for the performance of the contract.
(9) A group of economic operators as referred to in regulation 35(4) (economic operators) may rely upon the capacities of participants in the group or of other entities, and paragraphs (1) to (8) apply in relation to such a group in the same way that they apply in relation to an economic operator.
(10) In the case of works contracts, supply contracts requiring siting or installation work and [F70service] contracts, a utility may require certain critical tasks to be performed directly by the tenderer itself or, where the tender is submitted by a group of economic operators as referred to in regulation 35(4) (economic operators), by a participant in that group.
Textual Amendments
F70Word in reg. 77(10) substituted (1.7.2019) by The Public Procurement etc. (Miscellaneous Amendments) (Scotland) Regulations 2019 (S.S.I. 2019/173), regs. 1(2), 2(6)
Commencement Information
78.—(1) This regulation applies to objective rules and criteria for the exclusion and selection of—
(a)economic operators requesting qualification in a qualification system; and
(b)candidates and tenderers in open, restricted or negotiated procedures, competitive dialogues or innovation partnerships.
(2) The objective rules and criteria may include—
(a)the exclusion grounds referred to in regulation 58 of the Public Contracts (Scotland) Regulations on the terms set out in that regulation;
(b)the selection criteria listed in regulation 59 of the Public Contracts (Scotland) Regulations on the terms set out in that regulation, including as regards the limits to requirements concerning yearly turnovers as provided for under regulation 59(9) and (10) of those Regulations.
(3) Where the utility is a contracting authority, the criteria and rules referred to in paragraph (1) must include the exclusion grounds listed in regulation 58(1) to (3) of the Public Contracts (Scotland) Regulations on the terms set out in that regulation.
(4) For the purposes of applying paragraphs (1) to (3), regulations 60 to 62 of the Public Contracts (Scotland) Regulations apply.
(5) For the purposes of paragraphs (2) and (4), any reference to a contracting authority in regulations 58 to 62 of the Public Contracts (Scotland) Regulations must be read as a reference to a utility.
Modifications etc. (not altering text)
C1Reg. 78 modified (18.4.2016) by S.S.I. 2013/50, Sch. 3 para. 10(2)(b) (as substituted by The Utilities Contracts (Scotland) Regulations 2016 (S.S.I. 2016/49), reg. 1, sch. 3 para. 3(2)(b))
Commencement Information
79.—(1) A utility must, where it requires the production of certificates drawn up by independent bodies attesting that the economic operator complies with certain quality assurance standards, including on accessibility for disabled persons, refer to quality assurance systems based on the relevant European standards series certified by accredited bodies.
F71(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(3) A utility must also accept other evidence of equivalent quality assurance measures where the economic operator concerned had no possibility of obtaining such certificates within the relevant time limits for reasons that are not attributable to that economic operator, provided that the economic operator proves that the proposed quality assurance measures comply with the required quality assurance standards.
(4) Where a utility requires the production of certificates drawn up by independent bodies attesting that the economic operator complies with certain environmental management systems or standards, the utility must refer to F72...
F72(a). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F72(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(c)F73... environmental management standards based on the relevant European or international standards by accredited bodies,
F74...
(5) Where an economic operator had demonstrably no access to such certificates referred to in paragraph (4) or no possibility of obtaining them within the relevant time limits for reasons that are not attributable to that economic operator, the utility must accept other evidence of environmental management measures, provided that the economic operator proves that these measures are equivalent to those required under the applicable environmental management system or standard.
Textual Amendments
F71Reg. 79(2) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(44)(a) (with sch. paras. 1-5)
F72Words in reg. 79(4) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(44)(b)(i) (with sch. paras. 1-5)
F73Word in reg. 79(4)(c) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(44)(b)(ii) (with sch. paras. 1-5)
F74Words in reg. 79(4) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(44)(b)(iii) (with sch. paras. 1-5)
Commencement Information
80.—(1) A utility must base the award of contracts on the most economically advantageous tender assessed from the point of view of the utility.
(2) Where the utility is a person mentioned in regulation 4(1)(a) (utilities) it must not use price only or cost only as the sole award criteria.
(3) A utility must identify the most economically advantageous tender on the basis of the price or cost using a cost-effectiveness approach (such as life-cycle costing in accordance with regulation 81 (life-cycle costing)) and may include the best price-quality ratio which must be assessed on the basis of criteria linked to the subject-matter of the contract in question.
(4) Criteria referred to in paragraph (3) may comprise or include—
(a)quality, including technical merit, aesthetic and functional characteristics, accessibility, design for all users, social, environmental and innovative characteristics and trading and its conditions;
(b)organisation, qualification and experience of staff assigned to performing the contract, where the quality of the staff assigned can have a significant impact on the level of performance of the contract; and
(c)after-sales service and technical assistance, delivery conditions such as delivery date, delivery process and delivery period or period of completion and commitments with regard to parts and security of supply.
(5) The cost element may also take the form of a fixed price or cost on the basis of which economic operators will compete on quality criteria only.
(6) Award criteria must be considered to be linked to the subject-matter of the contract where they relate to the works, supplies or services to be provided under that contract in any respect and at any stage of their life cycle, including factors involved in—
(a)the specific process of production, provision or trading of those works, supplies or services; or
(b)a specific process for another stage of their life cycle,
even where such factors do not form part of their material substance.
(7) Award criteria must—
(a)not have the effect of conferring an unrestricted freedom of choice upon the utility;
(b)ensure the possibility of effective competition; and
(c)be accompanied by specifications that allow the information provided by the tenderers to be effectively verified in order to assess how well the tenders meet the award criteria.
(8) In case of doubt, the utility must verify effectively the accuracy of the information and proof provided by the tenderers.
(9) The utility must specify, in the procurement documents, the relative weighting which it gives to each of the criteria chosen to determine the most economically advantageous tender.
(10) The weightings referred to in paragraph (9) may be expressed by providing for a range with an appropriate maximum spread.
(11) Where weighting is not possible for objective reasons, the utility must indicate the criteria in descending order of importance.
81.—(1) Life-cycle costing must, to the extent relevant, cover part or all of the following costs over the life cycle of a product, service or works—
(a)costs, borne by the utility or other users, such as—
(i)costs relating to acquisition;
(ii)costs of use, such as consumption of energy and other resources;
(iii)maintenance costs;
(iv)end of life costs, such as collection and recycling costs; and
(b)costs imputed to environmental externalities linked to the works, product or service during its life cycle, provided their monetary value can be determined and verified.
(2) The costs mentioned in paragraph (1)(b) may include the cost of emissions of greenhouse gases and of other pollutant emissions and other climate change mitigation costs.
(3) The method used for the assessment of costs imputed to environmental externalities must fulfil all of the following conditions—
(a)it is based on objectively verifiable and non-discriminatory criteria and, in particular, where it has not been established for repeated or continuous application, it must not unduly favour or disadvantage certain economic operators;
(b)it is accessible to all interested parties;
(c)the data required can be provided with reasonable effort by normally diligent economic operators F75... .
(4) Where a utility assesses costs using a life-cycle costing approach, the utility must indicate in the procurement documents—
(a)the data to be provided by the tenderers; and
(b)the method which the utility will use to determine the life-cycle costs on the basis of those data.
F76(5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F76(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F75Words in reg. 81(3)(c) omitted (31.12.2021) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(4), 7(3) (with sch. paras. 1-5, 10-15)
F76Reg. 81(5)(6) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(45)(b) (with sch. paras. 1-5)
Commencement Information
82.—(1) A utility must require a tenderer to explain the price or costs proposed in the tender where the tender appears to be abnormally low in relation to the works, supplies or services.
(2) The explanations given in accordance with paragraph (1) may, in particular, relate to—
(a)the economics of the manufacturing process, of the services provided or of the construction method;
(b)the technical solutions chosen or any exceptionally favourable conditions available to the tenderer for the execution of the works or for the supply of the products or services;
(c)the originality of the works, supplies or services proposed by the tenderer;
(d)compliance with obligations referred to in regulation 34(4) (principles of procurement);
(e)compliance with obligations referred to in regulation 85 (subcontracting);
F77(f). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[F78(g)whether the price or costs take into account the grant of subsidies.]
(3) The utility must assess the information provided by consulting the tenderer.
(4) The utility may only reject the tender where the explanations given and any evidence supplied do not satisfactorily account for the low level of price or costs proposed, taking into account the elements referred to in paragraph (2).
(5) The utility must reject the tender where the utility has established that the tender is abnormally low because it does not comply with applicable obligations referred to in regulation 34(4) (principles of procurement).
F79(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F79(7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F77Reg. 82(2)(f) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(46)(a) (with sch. paras. 1-5)
F78Reg. 82(2)(g) inserted (27.6.2022) by The Public Procurement (International Trade Agreements) (Amendment) Regulations 2022 (S.I. 2022/766), regs. 1(1), 6(2) (with reg. 9)
F79Reg. 82(6)(7) omitted (31.12.2020) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(2), 6(46)(b) (with sch. paras. 1-5)
Commencement Information
F8083. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F80Reg. 83 omitted (31.12.2021) by virtue of The Public Procurement etc. (EU Exit) (Scotland) (Amendment) Regulations 2020 (S.S.I. 2020/468), regs. 1(4), 7(4) (with sch. paras. 1-5, 10-15)
OJ L 218, 13.8.2008, p.30.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Policy Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2012 onwards. Prior to this date these type of notes existed as ‘Executive Notes’ and accompanied Scottish Statutory Instruments from July 2005 until July 2012.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: