- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As made)
Point in time view as at 31/12/2020.
There are currently no known outstanding effects for the The Seed (Licensing and Enforcement etc.) (Scotland) Regulations 2016, PART II.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
2.—(1) The Cereal Seed (Scotland) Regulations 2005(1) are amended in accordance with this paragraph.S
(2) In regulation 2(1) (interpretation)—
(a)for the definition of “licensed crop inspector” substitute—
““licensed crop inspector” means a person who holds a current licence to be a crop inspector—
granted by the Scottish Ministers or having effect as if it were a licence granted by the Scottish Ministers under regulation 4(1)(a) of the Seed (Licensing and Enforcement etc.) (Scotland) Regulations 2016; or
granted by a National Authority other than the Scottish Ministers under provisions equivalent to that regulation;”;
(b)for the definition of “licensed seed sampler” substitute—
““licensed seed sampler” means a person who holds a current licence to be a seed sampler—
granted by the Scottish Ministers or having effect as if it were a licence granted by the Scottish Ministers under regulation 4(1)(a) of the Seed (Licensing and Enforcement etc.) (Scotland) Regulations 2016; or
granted by a National Authority other than the Scottish Ministers under provisions equivalent to that regulation;”;
(c)for the definition of “licensed seed testing station” substitute—
““licensed seed testing station” means an establishment which holds a current seed testing station licence—
granted by the Scottish Ministers or having effect as if it were a licence granted by the Scottish Ministers under regulation 4(1)(a) of the Seed (Licensing and Enforcement etc.) (Scotland) Regulations 2016; or
granted by a National Authority other than the Scottish Ministers under provisions equivalent to that regulation;” and
(d)for the definition of “registered number” substitute—
““professional seed operator” means a seed merchant, a seed packer or a seed processor;
“registered or licensed number” means the number issued to a person who holds a licence granted under regulation 4(1)(a) of the Seed (Licensing and Enforcement etc.) (Scotland) Regulations 2016 or to a person licensed or registered by a National Authority other than the Scottish Ministers under provisions equivalent to that regulation;”.
(3) In regulation 16 (sealing of packages of fully certified seed)—
(a)in paragraph (4), for “or a person registered by a National Authority in any part of the United Kingdom as a seed merchant, seed packer or seed processor under regulation 5(1) (registrations) of the Seed (Registration, Licensing and Enforcement) (Scotland) Regulations 2006 or provisions equivalent to that regulation” substitute “or a person licensed or registered in any part of the United Kingdom as a professional seed operator under regulation 4(1)(a) of the Seed (Licensing and Enforcement etc.) (Scotland) Regulations 2016 or provisions equivalent to that regulation”; and
(b)in paragraph (5), for “or a person registered by a National Authority in any part of the United Kingdom as a seed merchant, seed packer or seed processor under regulation 5(1) (registrations) of the Seed (Registration, Licensing and Enforcement) (Scotland) Regulations 2006 or provisions equivalent to that regulation” substitute “or a person licensed or registered in any part of the United Kingdom as a professional seed operator under regulation 4(1)(a) of the Seed (Licensing and Enforcement etc.) (Scotland) Regulations 2016 or provisions equivalent to that regulation”.
(4) For regulation 25(2)(a) (service of notices) substitute-—
“(a)in the case of a professional seed operator, a crop inspector or a seed sampler licensed under regulation 4(1)(a) of the Seed (Licensing and Enforcement etc.) (Scotland) Regulations 2016, it is the address which could be made available by the Scottish Ministers under regulation 10 of those Regulations; and”.
(5) For “registered number” substitute “registered or licensed number” where it appears in the following provisions—
(a)in Schedule 3 (particulars to be specified in an official certificate or a breeder’s confirmation)—
(i)paragraph 1(b) (particulars to be specified in an official certificate); and
(ii)paragraph 2(b) (particulars to be specified in a breeder’s confirmation);
(b)in Schedule 4A (standards for certification of conservation varieties)(2), in Part II, sub-paragraph (b) (particulars to be specified in an official certificate); and
(c)in Schedule 6, in Part II (labels), paragraph 3(a)(i) (labels for a package of Breeder’s Seed).
(6) In Schedule 4 (requirements for pre basic seed, basic seed, certified seed, certified seed of the first generation and certified seed of the second generation)—
(a)in Part I (conditions relating to crops from which seed is obtained)—
(i)for paragraph 7 (isolation distances – minimum distances) substitute—
7.—(1) Subject to sub-paragraph (2), for maize, self-pollinating varieties of triticale, rye and hybrids of barley produced by means of cytoplasmic male sterility, the minimum distance from neighbouring crops or plants of other species, or of other varieties of the same species, liable to cross-pollinate with the crop shall be the distance specified in column 2 of the following table for the corresponding crop specified in column 1 of the table (which can include any distance of at least 2 metres of fallow ground required under paragraph 6)—
Column 1 | Column 2 | ||
---|---|---|---|
Crop | Minimum Distance | ||
(a) | Maize– | ||
(i) | for the production of Basic Seed | 200 metres | |
(ii) | for the production of Certified Seed | 200 metres | |
(b) | Self-pollinating variety of triticale— | ||
(i) | for the production of Basic Seed | 50 metres | |
(ii) | for the production of Certified Seed | 20 metres | |
(c) | Rye (other than hybrids)— | ||
(i) | for the production of Basic Seed | 300 metres | |
(ii) | for the production of Certified Seed | 250 metres | |
(d) | Hybrids of rye— | ||
(i) | for the production of Basic Seed where male sterility is used | 1,000 metres | |
(ii) | for the production of Basic Seed where male sterility is not used | 600 metres | |
(iii) | for the production of Certified Seed | 500 metres | |
(e) | Hybrids of barley produced by means of cytoplasmic male sterility— | ||
(i) | for the production of Basic Seed | 100 metres | |
(ii) | for the production of Certified Seed | 50 metres |
(2) The minimum distance specified in paragraph (1) may, subject to the approval of the Scottish Ministers, be modified or disregarded if the Scottish Ministers are satisfied that there is adequate protection against undesirable foreign pollen.”;
(ii)for paragraph 8(5) (standards for varietal purity) substitute—
“(5) In crops of hybrids of durum wheat, oats, self-pollinating triticale, spelt wheat or wheat or hybrids of barley other than hybrids of barley produced by means of cytoplasmic male sterility—
(a)subject to sub-paragraph (b), varieties of the female component of the crop shall be at least 25 metres from a crop of any other variety of the same species except from a crop of the male component;
(b)sub-paragraph (a) shall not apply if there is sufficient protection from any undesirable foreign pollination;
(c)where seed is produced using a chemical hybridisation agent, the crop shall conform to the following standards or other conditions—
(i)the minimum varietal purity of each component shall be—
(aa)in the case of barley, durum wheat, oats, spelt wheat or wheat, 99.7%; and
(bb)in the case of self-pollinating varieties of triticale, 99.0%; and
(ii)the minimum hybridity must be 95%; and
(d)in cases where the hybridity is determined during seed testing prior to certification, the determination of the hybridity during a field inspection need not be done.
(6) In crops of hybrids of barley produced by means of cytoplasmic male sterility—
(a)the percentage by number of plants which are recognisable as obviously not being true to the variety shall not exceed—
(i)where the crop is used for the production of Basic Seed, 0.1% for the maintainer and the restorer line and 0.2% for the cytoplasmic male sterility female component; and
(ii)where the crop is used for the production of Certified Seed—
(aa)0.3% for the restorer and the cytoplasmic male sterility female component; or
(bb)0.5% for the restorer, where the cytoplasmic male sterility female component is a simple hybrid;
(b)the level of sterility of the female component shall be at least—
(i)where the crop is used for the production of Basic Seed, 99.7%; and
(ii)where the crop is used for the production of Certified Seed, 99.5%; and
(c)in the case of Certified Seed, the crop may be produced in mixed cultivation of a female male-sterile component with a male component which restores fertility.”; and
(b)in Part II (conditions relating to basic seed, certified seed, certified seed of the first generation and certified seed of the second generation)—
(i)in paragraph 13 (standards for varietal purity)—
(aa)in the table in sub-paragraph (3), for sub-paragraph (b) substitute—
“(b) | Hybrids of durum wheat, oats, self-pollinating varieties of triticale, spelt wheat or wheat and hybrids of barley other than hybrids of barley produced by means of cytoplasmic male sterility— | |||
(i) | Certified Seed | 90.00% | ||
(ba) | Hybrids of barley produced by means of cytoplasmic male sterility— | |||
(i) | Certified Seed | 85.00% ” |
; and
(bb)after sub-paragraph (4) insert—
“(4A) For the purposes of sub-paragraph (3)(ba), impurities other than the restorer shall not exceed 2%.”; and
(cc)in sub-paragraph (5), for “sub-paragraph (3)(c)” substitute “sub-paragraphs (3)(b), (ba) and (c)”; and
(ii)in paragraph 15 (standards for varietal purity for hybrid varieties of rye)—
(aa)for the heading substitute—
(bb)after “rye” insert “or a cytoplasmic male sterility hybrid variety of barley”.
(7) In Schedule 9 (definition of Cereal Seed Directive), in the table, insert after the entry for Council Directive 2006/55/EC(3) the following entries—
“Commission Directive 2009/74/EC | OJ L 166, 27.6.2009, p.40 |
Commission Implementing Directive 2012/1/EU | OJ L 4, 7.1.2012, p.8 |
Commission Implementing Directive 2012/37/EU | OJ L 325, 23.11.2012, p.13 |
Commission Implementing Directive (EU) 2015/1955 | OJ L 284, 30.10.2015, p.142” |
Commencement Information
I1Sch. 3 para. 2 in force at 1.7.2016, see reg. 1(1)
S.S.I. 2005/328, amended by S.S.I. 2006/313, S.S.I. 2006/448, S.S.I. 2007/224, S.S.I. 2007/536, S.S.I. 2009/223 and S.S.I. 2010/219.
Schedule 4A was inserted by S.S.I. 2009/223 Schedule 3, paragraph 1.
That entry was inserted by S.S.I. 2007/224, regulation 11.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Policy Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2012 onwards. Prior to this date these type of notes existed as ‘Executive Notes’ and accompanied Scottish Statutory Instruments from July 2005 until July 2012.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: