- Latest available (Revised)
- Point in Time (24/11/2022)
- Original (As made)
Point in time view as at 24/11/2022. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Feed Additives (Authorisations) (Scotland) Regulations 2022, Paragraph 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1. The preparation specified in the table in this schedule, belonging to the additive category ‘zootechnical additives’ and to the functional group ‘gut flora stabilisers’, is authorised as an additive in animal nutrition, subject to the conditions set out in the table in this schedule.
Column 1 | Column 2 | |
---|---|---|
Additive | Bacillus licheniformis DSM 28710 | |
Identification number of the additive | 4b1828 | |
Authorisation holder | HuvePharma NV | |
Additive category | Zootechnical additives | |
Functional group | Gut flora stabilisers | |
Additive composition | Solid form preparation of Bacillus licheniformis DSM 28710 containing a minimum of 3.2 x 109 CFU/g of additive | |
Characterisation of the active substance(s) | Viable spores of Bacillus licheniformis DSM 28710 | |
Analytical methods(1) | 1. For enumeration (colony count) in the additive, premixture and feed: | |
| ||
2. For identification of bacterial strain: | ||
| ||
Species or category of animal | Laying hens, minor poultry species for laying, poultry species for breeding and ornamental birds | |
Maximum age | Not applicable | |
Content of Bacillus licheniformis DSM 28710 in CFU/kg of complete feed with a moisture content of 12% | Minimum content | 1.6 x 109 CFU/kg |
Maximum content | No maximum | |
Other provisions | 1. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment must be indicated. 2. Where Bacillus licheniformis DSM 28710 is to be used in feed containing coccidiostats, this feed additive is authorised for use with the following coccidiostats only, and in accordance with their individual authorisation criteria: | |
|
Commencement Information
I1Sch. 7 para. 1 in force at 24.11.2022, see reg. 1(1)
Details of the analytical methods are set out in the document referenced “Ares(2015)4524025 – 23/10/2015” and last updated on 6 June 2016. The document is available at the following address: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports/fad-2015-0016.
This standard was approved by the European Committee for Standardization (CEN) on 2 August 2021. Under reference BS EN 15784:2021, it was published as a UK standard by the British Standards Institution on 30 November 2021 (ISBN 978 0 580 99829 4).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Policy Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2012 onwards. Prior to this date these type of notes existed as ‘Executive Notes’ and accompanied Scottish Statutory Instruments from July 2005 until July 2012.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: