The Ecodesign for Energy-Related Products and Energy Information (Lighting Products) Regulations 2021
PART 1INTRODUCTION
1Citation, commencement and extent
PART 2ECODESIGN AND ENERGY LABELLING FOR LIGHT SOURCES AND SEPARATE CONTROL GEARS
CHAPTER 1GENERAL
Interpretation
CHAPTER 2ECODESIGN FOR LIGHT SOURCES AND SEPARATE CONTROL GEARS
3Application
4Ecodesign requirements
5Exemptions
6Removal of light sources and separate control gears
7Conformity assessment
8Verification procedure for market surveillance purposes
9Measurements and calculations
10Circumvention and software updates
CHAPTER 3ENERGY LABELLING OF LIGHT SOURCES
11Application
12Obligations of suppliers
13Obligations of dealers
14Obligations of internet hosting platforms
15Measurement methods
16Verification procedure for market surveillance purposes
17Light sources placed on the market before 1st October 2021
PART 3GENERAL
18Review
19Revocations
20Consequential amendments of the 2010 Regulations
21Consequential amendments of the Energy Information Regulations 2011
22Transitional and saving provisions in connection with ecodesign requirements
23Transitional and saving provisions in connection with energy labelling requirements
SCHEDULE 1Interpretation
1Interpretation
SCHEDULE 2Verification procedure for market surveillance purposes
1Interpretation
2Verification procedure
3The product model conforms to these Regulations if all the...
4For the purposes of paragraph 3(a), (b), (d) and (e),...
5For the purpose of paragraph 3(c), the market surveillance authority...
6If any of the conditions set out in paragraph 3...
7Where a product model has been designed to be able...
8Verification tolerances
SCHEDULE 3Ecodesign requirements for light sources and separate control gears
Energy efficiency requirements
3Functional requirements
4Information requirements
Light sources
5(1) The following information must be displayed on light sources...
Packaging
Light sources
6(1) Where a light source is placed on the market...
Separate control gears
7(1) Where a separate control gear is placed on the...
Websites
8(1) For any separate control gear that is placed on...
9Technical documentation
10Information for products specified in paragraph 3 of Schedule 4
11Reference control settings
SCHEDULE 4Exemptions
1Specified approvals
2Additional exemptions
3Limited exemptions
SCHEDULE 5Functionality after endurance testing
1(1) Models of LED and OLED light sources must undergo...
2(1) The endurance test for LED and OLED light sources...
SCHEDULE 6Exemptions
1Chapter 3 of Part 2 of these Regulations does not...
2Chapter 3 of Part 2 of these Regulations does not...
3(1) Except as provided in sub-paragraph (2), Chapter 3 of...
SCHEDULE 7Labels for light sources
1Format and placing of labels
2(1) The format of the standard sized label is as...
3Label designs
SCHEDULE 8Product information
1Product information sheet
2(1) An equivalence claim involving the power of a replaced...
3Information to be displayed for a containing product
4Information to be displayed on the supplier’s website
SCHEDULE 9Technical documentation
1The technical documentation referred to in regulation 12(1)(e) must include...
SCHEDULE 10Information to be provided in visual advertisements, technical promotional material, and in distance selling except distance selling on the internet
1(1) In— (a) visual advertisements for light sources, for the...
2(1) The energy efficiency class and the range of energy...
3Where a product is sold through telemarketing based distance selling,...
4For all the situations referred to in paragraphs 1 and...
SCHEDULE 11Information to be provided in the case of distance selling through the internet
1The following requirements apply to distance selling through the internet....
2(1) The appropriate label made available by suppliers in accordance...
3The image used for accessing the label in the case...
4In the case of a nested display, the sequence of...
5(1) The electronic product information sheet made available by suppliers...
SCHEDULE 12Energy labelling of light sources – energy efficiency classes and calculation method
1The energy efficiency class of light sources must be determined...
SCHEDULE 13Verification procedure for market surveillance purposes
1Interpretation
2Verification procedure
3The product model conforms to these Regulations if all the...
4(1) For the purposes of paragraph 3(a), (b) and (c),...
5If any of the conditions set out in paragraph 3...
6Where a model has been designed to be able to...
7Verification tolerances
Draft Regulations laid before Parliament under regulation 24(1)(b) of the Ecodesign for Energy-Related Products Regulations 2010 and Article 11A(2)(b) of Regulation (EU) 2017/1369 of the European Parliament and of the Council setting a framework for energy labelling, for approval by resolution of each House of Parliament.
2021 No. XXX
Energy Conservation

The Ecodesign for Energy-Related Products and Energy Information (Lighting Products) Regulations 2021

Made***
Coming into force in accordance with regulation 1(2) and (3)
The Secretary of State makes these Regulations in exercise of the powers conferred by regulations 22(1) and 24(2) of the Ecodesign for Energy-Related Products Regulations 20101 (“the 2010 Regulations”) and Articles 11(3) and 11A(3) of Regulation (EU) 2017/1369 of the European Parliament and of the Council setting a framework for energy labelling2 (“the Framework Regulation”).

A draft of this instrument was laid before Parliament in accordance with regulation 24(1)(b) of the 2010 Regulations and Article 11A(2)(b) of the Framework Regulation, and approved by a resolution of each House of Parliament.

For the purposes of paragraph (1) of regulation 22 of the 2010 Regulations, the Secretary of State considers that the matters set out in paragraphs (2) and (6) of that regulation are satisfied. The Secretary of State has complied with paragraph (4) of regulation 22 of those Regulations.

For the purposes of paragraph (3) of Article 11 of the Framework Regulation, the Secretary of State considers that the conditions set out in paragraph (1)(a) to (d) of that Article are satisfied. The Secretary of State has complied with paragraph (2) of Article 11 of that Regulation.