- Latest available (Revised)
- Point in Time (25/07/1991)
- Original (As enacted)
Version Superseded: 03/05/1994
Point in time view as at 25/07/1991. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Income and Corporation Taxes Act 1988, Paragraph 4 is up to date with all changes known to be in force on or before 25 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
F14(1)This paragraph applies in any case where, under a contract or other arrangements for the transfer of overseas securities, one of the parties (the “overseas dividend manufacturer”) is required to pay to the other (“the recipient”) an amount representative of an overseas dividend on the overseas securities; and in this Schedule the “manufactured overseas dividend” means any payment which the overseas dividend manufacturer makes in discharge of that requirement.
(2)Subject to sub-paragraph (3) below, where this paragraph applies the gross amount of the manufactured overseas dividend shall be treated for all purposes of the Tax Acts as an annual payment, within section 349, but—
(a)the amount which is to be deducted from that gross amount on account of income tax shall be an amount equal to the relevant withholding tax on that gross amount; and
(b)in the application of sections 338(4)(a) and 350(4) in relation to manufactured overseas dividends the references to Schedule 16 shall be taken as references to dividend manufacturing regulations;
and paragraph (a) above is without prejudice to any further amount required to be deducted under dividend manufacturing regulations by virtue of sub-paragraph (8) below.
(3)If, in a case where this paragraph applies, the overseas dividend manufacturer is not resident in the United Kingdom and the manufactured overseas dividend is paid by him otherwise than in the course of a trade which he carries on through a branch or agency in the United Kingdom, sub-paragraph (2) above shall not apply; but if the manufactured overseas dividend is received by a person resident in the United Kingdom (the “United Kingdom recipient”), then unless the United Kingdom recipient shows either—
(a)that the overseas dividend manufacturer was entitled to payment of the overseas dividend as the registered holder of the overseas securities, or
(b)that the overseas dividend manufacturer was entitled to payment of the overseas dividend directly or indirectly from a person from whom he acquired the overseas securities, or to whom he transferred them, and who was so entitled to the payment,
the United Kingdom recipient shall account for and pay an amount of tax in respect of the manufactured overseas dividend equal to that which the overseas dividend manufacturer would have been required to account for and pay had he been resident in the United Kingdom; and any reference in this Schedule to an amount deducted under sub-paragraph (2) above includes a reference to an amount of tax accounted for and paid under this sub-paragraph.
(4)Where a manufactured overseas dividend is paid after deduction of the amount required by sub-paragraph (2) above, or where the amount of tax required under sub-paragraph (3) above in respect of such a dividend has been accounted for and paid, then for all purposes of the Tax Acts as they apply in relation to persons resident in the United Kingdom or to persons not so resident but carrying on business through a branch or agency in the United Kingdom—
(a)the manufactured overseas dividend shall be treated in relation to the recipient, and all persons claiming title through or under him, as if it were an overseas dividend of an amount equal to the gross amount of the manufactured overseas dividend, but paid after the withholding therefrom, on account of overseas tax, of the amount deducted under sub-paragraph (2) above; and
(b)the amount so deducted shall accordingly be treated in relation to the recipient, and all persons claiming title through or under him, as an amount so withheld instead of as an amount on account of income tax.
(5)For the purposes of this paragraph—
(a)“relevant withholding tax”, in relation to the gross amount of a manufactured overseas dividend, means an amount of tax representative of—
(i)the amount (if any) that would have been deducted by way of overseas tax from an overseas dividend on the overseas securities of the same gross amount as the manufactured overseas dividend; and
(ii)the amount of the overseas tax credit (if any) in respect of such an overseas dividend;
(b)the gross amount of a manufactured overseas dividend is an amount equal to the gross amount of that overseas dividend of which the manufactured overseas dividend is representative, as mentioned in sub-paragraph (1) above; and
(c)the gross amount of an overseas dividend is an amount equal to the aggregate of—
(i)so much of the overseas dividend as remains after the deduction of the overseas tax (if any) chargeable on it;
(ii)the amount of the overseas tax (if any) so deducted; and
(iii)the amount of the overseas tax credit (if any) in respect of the overseas dividend.
(6)Dividend manufacturing regulations may make provision with respect to the rates of relevant withholding tax which are to apply in relation to manufactured overseas dividends in relation to different overseas territories, but in prescribing those rates the Treasury shall have regard to—
(a)the rates at which overseas tax would have fallen to be deducted, and
(b)the rates of overseas tax credits,
in overseas territories, or in the particular overseas territory, in respect of payments of overseas dividends on overseas securities.
(7)Dividend manufacturing regulations may make provision for a person who, in any chargeable period, is an overseas dividend manufacturer to be entitled in prescribed circumstances to set off against each other, in accordance with the regulations—
(a)overseas tax in respect of any overseas dividends, or amounts deducted under sub-paragraph (2) above from any manufactured overseas dividends, received by him in that chargeable period, and
(b)the sums due from him on account of the amounts deducted by him under sub-paragraph (2) above from the manufactured overseas dividends paid by him in that chargeable period,
and account to the Board for, or as the case may be, claim credit in respect of, the balance.
(8)Dividend manufacturing regulations may also make provision for cases where a manufactured overseas dividend is paid or otherwise dealt with in circumstances such that, had it been an overseas dividend in respect of the overseas securities, it would have been—
(a)a relevant foreign dividend, within the meaning of section 123,
(b)a foreign dividend, within the meaning of that section,
(c)interest on a quoted Eurobond held in a recognised clearing system, within the meaning of section 124, or
(d)an overseas public revenue dividend, within the meaning of Part III,
and, notwithstanding anything in sub-paragraph (2) or (3) above, any such regulations may provide for deductions of an amount determined by reference to the gross amount of the manufactured overseas dividend to be made from the manufactured overseas dividend on account of income tax similar to the deductions that would, in the case of an overseas dividend, be made under subsection (2) or (3) of section 123 or under Part III, as the case may be, and for Parts III and IV of Schedule 3 to apply with prescribed modifications in relation thereto.
Textual Amendments
F1Sch. 23A inserted by Finance Act 1991 (c. 31, SIF 63:1), s. 58, Sch. 13 para.1 (with effect as mentioned in s. 58(3) in relation to payments made on or after such day as may be specified: 26.2.1992 specified for certain purposes by S.I. 1992/173, reg.2; 30.6.1992 specified for certain purposes by S.I. 1992/1346, regs.2, 3, 4; 21.4.1993 specified for certain purposes by S.I. 1993/933, regs.2, 3(b), 4)
Modifications etc. (not altering text)
C1Sch. 23A para. 4(1) applied (1.10.1993) by S.I. 1993/2004, reg.2
C2Sch. 23A para. 4(2) restricted (1.10.1993) by S.I. 1993/2004, reg.5(1)
C3Sch. 23A para. 4(3) restricted (1.10.1993) by S.I. 1993/2004, reg.7(1) (as amended by S.I. 2011/1787, regs. 1, 7)
The Whole Act you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Act you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Act you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Act without Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: