Capital Allowances Act 2001

Restrictions on amount of qualifying expenditureU.K.

185 Fixture on which a plant and machinery allowance has been claimedU.K.

(1)This section applies if—

(a)a person (“the current owner”) is treated as the owner of a fixture as a result of incurring capital expenditure (“new expenditure”) on its provision,

(b)the plant or machinery is treated as having been owned at a relevant earlier time by any person (“the past owner”) as a result of incurring other expenditure,

(c)the plant or machinery is within paragraph (b) otherwise than as a result of section 538 (contribution allowances for plant and machinery), and

(d)the past owner is or has been required to bring the disposal value of the plant or machinery into account (as a result of having made a claim in respect of that other expenditure).

(2)If the new expenditure exceeds the maximum allowable amount, the excess—

(a)is to be left out of account in determining the current owner’s qualifying expenditure, or

(b)if the new expenditure has already been taken into account for this purpose, is to be treated as expenditure that should never have been taken into account.

(3)The maximum allowable amount is—

where—

  • D is the disposal value of the plant or machinery which the past owner has been or is required to bring into account, and

  • I is any of the new expenditure that is treated under section 25 (building alterations in connection with installation) as expenditure on the provision of the plant or machinery.

(4)If more than one disposal event has occurred requiring the past owner to bring the disposal value of the plant or machinery into account, the maximum allowable amount is calculated by reference only to the most recent of those events.

(5)For the purposes of this section, the current owner and the past owner may be the same person.

(6)In subsection (1)(b) “relevant earlier time” means (subject to subsection (7)) any time before the earliest time when the current owner is treated as owning the plant or machinery as a result of incurring the new expenditure.

(7)If, before the earliest time when the current owner is treated as owning the plant or machinery as a result of incurring the new expenditure—

(a)any person has ceased to own the plant or machinery as a result of a sale,

(b)the sale was not a sale of the plant or machinery as a fixture, and

(c)the buyer and seller were not connected persons at the time of the sale,

the relevant earlier time does not include any time before the seller ceased to own the plant or machinery.

186 Fixture on which an industrial buildings allowance has been madeU.K.

(1)This section applies if—

(a)a person (“the past owner”) has at any time claimed an allowance to which he [F1was] entitled under Part 3 (industrial buildings allowances) in respect of expenditure which was or included expenditure on the provision of plant or machinery,

(b)the past owner has transferred the interest which [F2was] the relevant interest for the purposes of Part 3, and

(c)the current owner of the plant or machinery makes a claim in respect of expenditure (“new expenditure”) incurred—

(i)on the provision of the plant or machinery, and

(ii)at a time when it is a fixture in the building.

(2)If the new expenditure exceeds the maximum allowable amount, the excess is to be left out of account in determining the current owner’s qualifying expenditure.

(3)[F3If the total consideration for the transfer by the past owner exceeds R,] the maximum allowable amount is—

where—

  • F is the part of the consideration for the transfer by the past owner that is attributable to the fixture,

  • T is the total consideration for that transfer, and

  • R is the residue of qualifying expenditure [F4which would have been] attributable to the relevant interest immediately after that transfer, calculated on the assumption that the transfer was a sale of the relevant interest[F5, had the time immediately after the transfer fallen immediately before the repeal of Part 3 by section 84 of [F6FA] 2008.]

[F7(3A)Where subsection (3) does not apply, the maximum allowable amount is the part of the consideration for the transfer by the past owner that is attributable to the fixture.]

(4)For the purposes of this section the current owner of the plant or machinery is—

(a)the person to whom the past owner transferred the relevant interest, or

(b)any person who is subsequently treated as the owner of the plant or machinery.

(5)In this section “building” and “residue of qualifying expenditure” have the same meaning as [F8for the purposes of Part 3 immediately before its repeal by section 84 of [F9FA] 2008.]

Textual Amendments

F1Word in s. 186(1)(a) substituted (with effect in accordance with Sch. 27 para. 30(2) of the amending Act) by Finance Act 2008 (c. 9), Sch. 27 para. 5(2)

F2Word in s. 186(1)(b) substituted (with effect in accordance with Sch. 27 para. 30(2) of the amending Act) by Finance Act 2008 (c. 9), Sch. 27 para. 5(2)

F3Words in s. 186(3) inserted (with effect in accordance with Sch. 27 para. 30(2) of the amending Act) by Finance Act 2008 (c. 9), Sch. 27 para. 5(3)(a)

F4Words in s. 186(3) inserted (with effect in accordance with Sch. 27 para. 30(2) of the amending Act) by Finance Act 2008 (c. 9), Sch. 27 para. 5(3)(b)(i)

F5Words in s. 186(3) inserted (with effect in accordance with Sch. 27 para. 30(2) of the amending Act) by Finance Act 2008 (c. 9), Sch. 27 para. 5(3)(b)(ii)

F6Word in s. 186(3) substituted (21.7.2009) by Finance Act 2009 (c. 10), s. 126(5)(a)

F7S. 186(3A) inserted (with effect in accordance with Sch. 27 para. 30(2) of the amending Act) by Finance Act 2008 (c. 9), Sch. 27 para. 5(4)

F8Words in s. 186(5) substituted (with effect in accordance with Sch. 27 para. 30(2) of the amending Act) by Finance Act 2008 (c. 9), Sch. 27 para. 5(5)

F9Word in s. 186(5) substituted (21.7.2009) by Finance Act 2009 (c. 10), s. 126(5)(a)

[F10186AFixtures on which a business premises renovation allowance has been madeU.K.

(1)This section applies if—

(a)a person (“the past owner”) has at any time claimed an allowance to which that person was entitled under Part 3A (business premises renovation allowances) in respect of qualifying expenditure under that Part incurred in respect of a qualifying building (“Part 3A expenditure”),

(b)there has been a balancing event within section 360N(1) as a result of which an asset representing the whole or part of the Part 3A expenditure (“the Part 3A asset”) ceased to be owned by the past owner,

(c)the Part 3A asset was or included plant or machinery, and

(d)the current owner makes a claim under this Part in respect of expenditure (“new expenditure”) incurred—

(i)on the provision of the plant or machinery, and

(ii)at a time when it is a fixture.

(2)If the new expenditure exceeds the maximum allowable amount, the excess is to be left out of account in determining the current owner's qualifying expenditure.

(3)If the proceeds from the balancing event mentioned in subsection (1)(b) exceed R, the maximum allowance amount is—

where—

F is so much of the proceeds from the balancing event as are attributable to the fixture,

T is the total amount of the proceeds from the balancing event, and

R is the qualifying expenditure incurred by the past owner on the Part 3A asset less the net Part 3A allowances in respect of that asset.

(4)Where subsection (3) does not apply, the maximum allowable amount is so much of the proceeds from the balancing event as are attributable to the fixture.

(5)For the purposes of subsection (3) the “net Part 3A allowances” in respect of the Part 3A asset means—

(a)the total of any allowances made under Part 3A in respect of the past owner's qualifying expenditure, less

(b)the total of any balancing charges made under that Part in respect of that expenditure.

(6)For the purposes of this section, the current owner of the plant or machinery is—

(a)the person who acquired the Part 3A asset from the past owner, or

(b)any person who is subsequently treated as the owner of the plant or machinery.]

Textual Amendments

F10S. 186A inserted (with effect in accordance with Sch. 10 para. 12 of the amending Act) by Finance Act 2012 (c. 14), Sch. 10 para. 6

187 Fixture on which a research and development allowance has been madeU.K.

(1)This section applies if—

(a)a person has at any time claimed an allowance to which he is entitled under Part 6 (research and development allowances) in respect of qualifying expenditure under that Part (“Part 6 expenditure”),

(b)an asset representing the whole or part of the Part 6 expenditure (“the Part 6 asset”) has ceased to be owned by that person (“the past owner”),

(c)the Part 6 asset was or included plant or machinery, and

(d)the current owner makes a claim under this Part in respect of expenditure (“new expenditure”) incurred—

(i)on the provision of the plant or machinery, and

(ii)at a time when it is a fixture.

(2)If the new expenditure exceeds the maximum allowable amount, the excess is to be left out of account in determining the current owner’s qualifying expenditure.

(3)The maximum allowable amount is—

where—

  • F is the part of the consideration for the disposal of the Part 6 asset by the past owner that is attributable to the fixture,

  • T is the total consideration for that disposal, and

  • A is an amount equal to whichever is the smaller of—

    (a)

    the disposal value of the Part 6 asset when the past owner ceased to own it, and

    (b)

    so much of the Part 6 expenditure as related to the provision of the Part 6 asset.

(4)For the purposes of this section the current owner of the plant or machinery is—

(a)the person who acquired the Part 6 asset from the past owner, or

(b)any person who is subsequently treated as the owner of the plant or machinery.

[F11187AEffect of changes in ownership of a fixtureU.K.

(1)This section applies if—

(a)a person (“the current owner”) is treated as the owner of a fixture as a result of incurring capital expenditure (“new expenditure”) on its provision for the purposes of a qualifying activity carried on by the current owner,

(b)the plant or machinery is treated as having been owned at a relevant earlier time by a person as a result of incurring other capital expenditure (“historic expenditure”) on its provision for the purposes of a qualifying activity carried on by that person,

(c)the plant or machinery is within paragraph (b) otherwise than as a result of section 538 (contribution allowances for plant and machinery), and

(d)a person mentioned in paragraph (b) was entitled to claim an allowance under this Part in respect of the historic expenditure.

(2)In this section—

  • “the past owner” means—

    (a)

    the person mentioned in paragraph (d) of subsection (1), or

    (b)

    if there is more than one amount of historic expenditure in respect of which a person was entitled to claim as mentioned in that paragraph, the person by whom expenditure was incurred most recently;

  • “relevant earlier time” has the meaning given by section 187B(4) and (5).

(3)In determining the current owner’s qualifying expenditure, the new expenditure is to be treated as nil if—

(a)the pooling requirement is not satisfied,

(b)the fixed value requirement applies but is not satisfied, or

(c)the disposal value statement requirement applies but is not satisfied,

in relation to the past owner.

(4)The pooling requirement is that—

(a)the historic expenditure has been allocated to a pool in a chargeable period beginning on or before the day on which the past owner ceases to be treated as the owner of the fixture, or

(b)a first-year allowance has been claimed in respect of that expenditure (or any part of it).

(5)The fixed value requirement applies if the past owner is or has been required (as a result of having made a claim in respect of the historic expenditure) to bring the disposal value of the plant or machinery into account in accordance with item 1, 5 or 9 of the Table in section 196.

(6)The fixed value requirement is that either—

(a)a relevant apportionment of the apportionable sum has been made, or

(b)the current owner has obtained the statements mentioned in subsection (8), or copies of them, (directly or indirectly) from the persons who made them and the case is one where the purchaser from the past owner or, as the case may be, lessee was not entitled to claim an allowance under this Part in respect of capital expenditure incurred on the fixture.

(7)For the purposes of subsection (6)(a) a relevant apportionment of the apportionable sum is made if—

(a)the tribunal determines the part of the apportionable sum that constitutes the disposal value, on an application made by one of the affected parties before the end of the relevant 2 year period, or

(b)an election is made, in respect of the apportionable sum, by the affected parties jointly—

(i)before the end of the relevant 2 year period, or

(ii)if an application is made as mentioned in paragraph (a) and not determined or withdrawn by the end of that period, before that application is determined or withdrawn.

(8)The statements referred to in subsection (6)(b) are—

(a)a written statement made by the purchaser from the past owner or, as the case may be, lessee, that the requirement of subsection (6)(a) has not been met and is no longer capable of being met, and

(b)a written statement made by the past owner of the amount of the disposal value that the past owner has in fact brought into account.

(9)In subsections (6) to (8)—

(a)in a case falling within item 1 or 9 of the Table in section 196—

  • “affected parties” means the past owner and the purchaser from the past owner;

  • “apportionable sum” means the sale price;

  • “election” means an election under section 198;

  • “relevant 2 year period” means the period of 2 years beginning with the date when the purchaser from the past owner acquires the qualifying interest;

(b)in a case falling within item 5 of that Table—

  • “affected parties” means the past owner and the lessee;

  • “apportionable sum” means the capital sum given by the lessee for the lease;

  • “election” means an election under section 199;

  • “relevant 2 year period” means the period of 2 years beginning with the date when the lessee is granted the lease.

(10)The disposal value statement requirement applies if the past owner is or has been required (as a result of having made a claim in respect of the historic expenditure) to bring the disposal value of the plant or machinery into account in accordance with item 2 or 3 of the Table in section 196 or in accordance with item 7 of the Table in section 61.

(11)The disposal value statement requirement is—

(a)that the past owner has, no later than 2 years after the date when the past owner ceased to own the plant or machinery, made a written statement of the amount of the disposal value that the past owner is or has been required to bring into account, and

(b)the current owner has obtained that statement or a copy of it (directly or indirectly) from the past owner.

Textual Amendments

F11Ss. 187A, 187B inserted (with effect in accordance with Sch. 10 paras. 11, 13 of the amending Act) by Finance Act 2012 (c. 14), Sch. 10 para. 1

187BSection 187A: supplementary provisionU.K.

(1)It is for the current owner to show—

(a)whether the fixed value requirement applies and, if so, is satisfied, and

(b)whether the disposal value statement requirement applies and, if so, is satisfied,

and, for this purpose, to provide an officer of Revenue and Customs, on request, with a copy of any tribunal decision, election or statement by reason of which a requirement mentioned in paragraph (a) or (b) is satisfied.

(2)Where—

(a)the fixed value requirement applies and is met by reason of section 187A(6)(b) being satisfied, or

(b)the disposal value requirement applies,

subsections (2) and (4) of section 200 apply in relation to the making of a statement within section 187A(8)(b) or (11)(a) and an amount specified in such a statement, as they apply in relation to an election and an amount specified in an election.

(3)For the purposes of section 187A, the current owner and the past owner may be the same person.

(4)In that section “relevant earlier time” means (subject to subsection (5)) any time which falls before the earliest time when the current owner is treated as owning the plant or machinery as a result of incurring the new expenditure.

(5)If, before the earliest time when the current owner is treated as owning the plant or machinery as a result of incurring the new expenditure—

(a)any person has ceased to own the plant or machinery as a result of a sale,

(b)the sale was not a sale of the plant or machinery as a fixture, and

(c)the buyer and seller were not connected persons at the time of the sale,

the relevant earlier time does not include any time before the seller ceased to own the plant or machinery.

(6)Nothing in section 187A(3) affects the disposal value (if any) which falls to be brought into account by the past owner (as a result of having made a claim in respect of the historic expenditure).

(7)Expressions used in this section have the same meaning as in section 187A.]

Textual Amendments

F11Ss. 187A, 187B inserted (with effect in accordance with Sch. 10 paras. 11, 13 of the amending Act) by Finance Act 2012 (c. 14), Sch. 10 para. 1