- Latest available (Revised)
- Point in Time (01/04/2014)
- Original (As enacted)
Version Superseded: 06/05/2020
Point in time view as at 01/04/2014.
There are outstanding changes not yet made by the legislation.gov.uk editorial team to Government of Wales Act 2006. Any changes that have already been made by the team appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
Textual Amendments
F1Pt. 3 ceases to have effect (5.5.2011) by virtue of Government of Wales Act 2006 (c. 32), s. 106(1)(1) (with ss. 106(2), 106A) (as amended (5.5.2011) by S.I. 2011/1011, art. 4; see S.I. 2011/1011, arts. 2, 3 for date of commencement of the Assembly Act provisions)
(1)A proposed Assembly Measure may, subject to the standing orders, be introduced in the Assembly—
(a)by the First Minister, any Welsh Minister appointed under section 48, any Deputy Welsh Minister or the Counsel General, or
(b)by any other Assembly member.
(2)The person in charge of a proposed Assembly Measure must, on or before the introduction of the proposed Assembly Measure, state that, in that person's view, its provisions would be within the Assembly's legislative competence.
(3)The Presiding Officer must, on or before the introduction of a proposed Assembly Measure in the Assembly—
(a)decide whether or not, in the view of the Presiding Officer, the provisions of the proposed Assembly Measure would be within the Assembly's legislative competence, and
(b)state that decision.
(4)A statement under this section must be made in both English and Welsh; but, subject to that, the form of the statement and the manner in which it is to be made are to be determined under the standing orders.
(5)The standing orders—
(a)may provide for a statement under this section to be published, and
(b)if they do so, must provide for it to be published in both English and Welsh.
Commencement Information
I1Ss. 1-94, 97-106 in force immediately after "the 2007 election" by s. 161(1) (subject to s. 161(4)(5))
(1)The standing orders must include provision—
(a)for general debate on a proposed Assembly Measure with an opportunity for Assembly members to vote on its general principles,
(b)for the consideration of, and an opportunity for Assembly members to vote on, the details of a proposed Assembly Measure, and
(c)for a final stage at which a proposed Assembly Measure can be passed or rejected.
(2)Subsection (1) does not prevent the standing orders making provision to enable the Assembly to expedite proceedings in relation to a particular proposed Assembly Measure.
(3)The standing orders may make provision different from that required by subsection (1) for the procedure applicable to proposed Assembly Measures of any of the following kinds—
(a)proposed Assembly Measures which restate the law,
(b)proposed Assembly Measures which repeal or revoke spent enactments, and
(c)private proposed Assembly Measures.
(4)The standing orders must include provision for securing that the Assembly may only pass a proposed Assembly Measure containing provisions which would, if contained in a Bill for an Act of Parliament, require the consent of Her Majesty or the Duke of Cornwall if such consent has been signified in accordance with the standing orders.
(5)The standing orders must include provision for securing that the Assembly may only pass a proposed Assembly Measure if the text of the proposed Assembly Measure is in both English and Welsh, unless the circumstances are such as are specified by the standing orders as any in which the text need not be in both languages.
(6)The standing orders must provide for an opportunity for the reconsideration of a proposed Assembly Measure after its passing if (and only if)—
(a)the Supreme Court decides on a reference made in relation to the proposed Assembly Measure under section 99 that the proposed Assembly Measure or any provision of it would not be within the Assembly's legislative competence,
(b)a reference made in relation to the proposed Assembly Measure under section 99 is withdrawn following a request for withdrawal of the reference under section 100(2)(b), or
(c)an order is made in relation to the proposed Assembly Measure under section 101.
(7)The standing orders must, in particular, ensure that any proposed Assembly Measure amended on reconsideration is subject to a final stage at which it can be approved or rejected.
(8)References in subsections (4), (5) and (6) of this section and sections 93(2) and 95(10) to the passing of a proposed Assembly Measure are, in the case of a proposed Assembly Measure which has been amended on reconsideration, to be read as references to its approval.
Commencement Information
I2Ss. 1-94, 97-106 in force immediately after "the 2007 election" by s. 161(1) (subject to s. 161(4)(5))
(1)The Counsel General or the Attorney General may refer the question whether a proposed Assembly Measure, or any provision of a proposed Assembly Measure, would be within the Assembly's legislative competence to the Supreme Court for decision.
(2)Subject to subsection (3), the Counsel General or the Attorney General may make a reference in relation to a proposed Assembly Measure at any time during—
(a)the period of four weeks beginning with the passing of the proposed Assembly Measure, and
(b)any period of four weeks beginning with any subsequent approval of the proposed Assembly Measure in accordance with provision included in the standing orders in compliance with section 98(7).
(3)No reference may be made in relation to a proposed Assembly Measure—
(a)by the Counsel General if the Counsel General has notified the Clerk that no reference is to be made in relation to it by the Counsel General, or
(b)by the Attorney General if the Attorney General has notified the Clerk that no reference is to be made in relation to it by the Attorney General.
(4)But subsection (3) does not apply if the proposed Assembly Measure has been approved as mentioned in subsection (2)(b) since the notification.
Commencement Information
I3Ss. 1-94, 97-106 in force immediately after "the 2007 election" by s. 161(1) (subject to s. 161(4)(5))
(1)This section applies where—
(a)a reference has been made in relation to a proposed Assembly Measure under section 99,
(b)a reference for a preliminary European Court ruling has been made by the Supreme Court in connection with that reference, and
(c)neither of those references has been decided or otherwise disposed of.
(2)If the Assembly resolves that it wishes to reconsider the proposed Assembly Measure—
(a)the Clerk must notify the Counsel General and the Attorney General of that fact, and
(b)the person who made the reference in relation to the proposed Assembly Measure under section 99 must request the withdrawal of the reference.
(3)In this section “a reference for a preliminary European Court ruling” means a reference of a question to the European Court under Article 234 of the Treaty establishing the European Community, Article 41 of the Treaty establishing the European Coal and Steel Community or Article 150 of the Treaty establishing the European Atomic Energy Community.
Commencement Information
I4Ss. 1-94, 97-106 in force immediately after "the 2007 election" by s. 161(1) (subject to s. 161(4)(5))
(1)This section applies if a proposed Assembly Measure contains provisions which the Secretary of State has reasonable grounds to believe—
(a)would have an adverse effect on any matter which is not specified in Part 1 of Schedule 5 [F2(or falls within any of the exceptions specified in paragraph A1 of Part 2 of that Schedule)],
(b)might have a serious adverse impact on water resources in England, water supply in England or the quality of water in England,
(c)would have an adverse effect on the operation of the law as it applies in England, or
(d)would be incompatible with any international obligation or the interests of defence or national security.
(2)The Secretary of State may make an order prohibiting the Clerk from submitting the proposed Assembly Measure for approval by Her Majesty in Council.
(3)The order must identify the proposed Assembly Measure and the provisions in question and state the reasons for making the order.
(4)The order may be made at any time during—
(a)the period of four weeks beginning with the passing of the proposed Assembly Measure,
(b)any period of four weeks beginning with any subsequent approval of the proposed Assembly Measure in accordance with provision included in the standing orders in compliance with section 98(7), or
(c)if a reference is made in relation to the proposed Assembly Measure under section 99, the period of four weeks beginning with the reference being decided or otherwise disposed of by the Supreme Court.
(5)The Secretary of State must not make an order in relation to a proposed Assembly Measure if the Secretary of State has notified the Clerk that no order is to be made in relation to the proposed Assembly Measure.
(6)Subsection (5) does not apply if the proposed Assembly Measure has been approved as mentioned in subsection (4)(b) since the notification.
(7)An order in force under this section at a time when such approval is given ceases to have effect.
(8)A statutory instrument containing an order under this section is subject to annulment in pursuance of a resolution of either House of Parliament.
Textual Amendments
F2Words in s. 101(1)(a) inserted (19.11.2009) by The National Assembly for Wales (Legislative Competence) (Exceptions to Matters) Order 2009 (S.I. 2009/3006), art. 2(5)
Commencement Information
I5Ss. 1-94, 97-106 in force immediately after "the 2007 election" by s. 161(1) (subject to s. 161(4)(5))
(1)It is for the Clerk to submit proposed Assembly Measures for approval by Her Majesty in Council.
(2)The Clerk may not submit a proposed Assembly Measure for approval by Her Majesty in Council at any time when—
(a)the Attorney General or the Counsel General is entitled to make a reference in relation to the proposed Assembly Measure under section 99,
(b)such a reference has been made but has not been decided or otherwise disposed of by the Supreme Court, or
(c)an order may be made in relation to the proposed Assembly Measure under section 101.
(3)The Clerk may not submit a proposed Assembly Measure in its unamended form for approval by Her Majesty in Council if—
(a)the Supreme Court has decided on a reference made in relation to the proposed Assembly Measure under section 99 that the proposed Assembly Measure or any provision of it would not be within the Assembly's legislative competence, or
(b)a reference made in relation to the proposed Assembly Measure under section 99 has been withdrawn following a request for withdrawal of the reference under section 100(2)(b).
(4)Once an Assembly Measure has been approved by Her Majesty in Council, the Clerk of the Privy Council must send the Order in Council approving the Assembly Measure to the Clerk.
(5)The date of the approval by Her Majesty in Council of an Assembly Measure is to be written on the Assembly Measure by the Clerk, and forms part of the Assembly Measure.
(6)The Clerk must publish the Order in Council by which an Assembly Measure is approved.
(7)The standing orders must include provision for the notification by the Clerk to the Assembly of the date of the approval of an Assembly Measure by Her Majesty in Council.
(8)The validity of an Assembly Measure is not affected by any failure to comply with provision made by or by virtue of subsection (4), (5) or (7).]
Commencement Information
I6Ss. 1-94, 97-106 in force immediately after "the 2007 election" by s. 161(1) (subject to s. 161(4)(5))
The Whole Act you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Act you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Act you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Text created by the government department responsible for the subject matter of the Act to explain what the Act sets out to achieve and to make the Act accessible to readers who are not legally qualified. Explanatory Notes were introduced in 1999 and accompany all Public Acts except Appropriation, Consolidated Fund, Finance and Consolidation Acts.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: