Search Legislation

Flood and Water Management Act 2010

High-risk reservoirs: inspections

299.Paragraph 12 amends section 10 of the Reservoirs Act 1975 (inspections).

300.Sub-paragraph (2) amends section 10(1) of the Reservoirs Act 1975 so as to only require the undertakers of high-risk reservoirs to have their reservoirs periodically inspected.

301.Sub-paragraph (3) amends section 10(2) of the Reservoirs Act 1975 to enable the Minister to make regulations about the times at which a high-risk reservoir must be inspected. Regulations made under section 10(2) (as amended) are subject to the affirmative resolution procedure.

302.Sub-paragraph (4) amends section 10(3) of the Reservoirs Act 1975 to allow the inspecting engineer to make any recommendations he sees fit as to: (a) the timing of the next inspection; (b) the maintenance of the reservoir; and (c) any measures required in the interests of safety and the period in which those measures must be taken. Sub-paragraph (8) amends section 10(6) of the Reservoirs Act 1975 to require undertakers to carry out any recommendations as to measures required in the interests of safety made by the inspecting engineer within the period specified in the engineer’s report. Sub-paragraph (6) amends section 10(5) of the Reservoirs Act 1975 to require the inspecting engineer to include in the certificate he is required to give under section 10(5) any recommendations as to the maintenance of the reservoir included in the engineer’s report. Sub-paragraph (7) adds a new subsection 10(5A) and requires the undertaker to comply with any recommendation made by an inspecting engineer under section 10(3)(b) of the Reservoirs Act 1975 (as amended) as to the maintenance of the reservoir.

303.Sub-paragraph (5) inserts a new subsection after section 10(3) of the Reservoirs Act 1975 to require an inspecting engineer to notify the Environment Agency if he or she has not provided a report before the end of the period of 6 months, beginning with the date of completion of the inspection of the reservoir and to provide a written statement of the reasons for this.

304.Sub-paragraph (9) inserts into section 10 of the Reservoirs Act 1975 subsection (6A). This subsection requires an inspecting engineer to include in his or her report, a statement as to whether all of the safety measures recommended in the previous inspection report have been taken. Where they have not, the inspecting engineer must either include in the report recommendations to take any safety measure that has not yet been taken or an explanation of why it is no longer required.

305.Paragraphs 13 and 14 contain various consequential amendments to the Reservoirs Act 1975 resulting from the new provision allowing an inspecting engineer to make recommendations as to the maintenance of the reservoir.

306.Paragraph 15 inserts subsections (1AA) and (1AB) after section 22(1) of the Reservoirs Act 1975 (criminal liability). Under new section 22(1AA), it is an offence to fail to comply with the requirements of section 10(5A). The penalty for this offence is set out in new subsection 22(1AB).

Back to top

Options/Help

Print Options

Close

Explanatory Notes

Text created by the government department responsible for the subject matter of the Act to explain what the Act sets out to achieve and to make the Act accessible to readers who are not legally qualified. Explanatory Notes were introduced in 1999 and accompany all Public Acts except Appropriation, Consolidated Fund, Finance and Consolidation Acts.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources