
Print Options
PrintThe Whole
Act
PrintThe Whole
Part
PrintThis
Section
only
Changes over time for: Section 13


Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Version Superseded: 01/01/1993
Status:
Point in time view as at 01/02/1991. This version of this provision has been superseded.

Status
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Changes to legislation:
There are currently no known outstanding effects for the Factories Act 1961, Section 13.

Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
13 Transmission machinery.E+W+S
(1)Every part of the transmission machinery shall be securely fenced unless it is in such a position or of such construction as to be as safe to every person employed or working on the premises as it would be if securely fenced.
(2)Efficient devices or appliances shall be provided and maintained in every room or place where work is carried on by which the power can promptly be cut off from the transmission machinery in that room or place.
(3)No driving belt when not in use shall be allowed to rest or ride upon a revolving shaft which forms part of the transmission machinery.
(4)Suitable striking gear or other efficient mechanical appliances shall be provided and maintained and used to move driving belts to and from fast and loose pulleys which form part of the transmission machinery, and any such gear or appliances shall be so constructed, placed and maintained as to prevent the driving belt from creeping back on to the fast pulley.
[(5)Where the Minister is satisfied that owing to special circumstances the fulfilment of any of the requirements of subsections (2) to (4) of this section is unnecessary or impracticable, he may by order direct that that requirement shall not apply in those circumstances.]
Textual Amendments
Modifications etc. (not altering text)
Back to top