- Latest available (Revised)
- Point in Time (01/02/1991)
- Original (As enacted)
Version Superseded: 30/04/1992
Point in time view as at 01/02/1991. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the Factories Act 1961, Section 26.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
(1)The following provisions shall be complied with as respects every chain, rope or lifting tackle used for the purpose of raising or lowering persons, goods or materials:—
(a)no chain, rope or lifting tackle shall be used unless it is of good construction, sound material, adequate strength and free from patent defect;
(b)subject to subsection (2) of this section, a table showing the safe working loads of every kind and size of chain, rope or lifting tackle in use, and, in the case of a multiple sling, the safe working load at different angles of the legs, shall be posted in the store in which the chains, ropes or lifting tackle are kept, and in prominent positions on the premises, and no chain, rope or lifting tackle not shown in the table shall be used;
(c)no chain, rope or lifting tackle shall be used for any load exceeding its safe working load as shown by the table mentioned in paragraph (b) of this subsection or marked as mentioned in subsection (2) of this section;
(d)all chains, ropes and lifting tackle in use shall be thoroughly examined by a competent person at least once in every period of six months or at such greater intervals as the Minister may prescribe;
(e)no chain, rope or lifting tackle, except a fibre rope or fibre rope sling, shall be taken into use in any factory for the first time in that factory unless it has been tested and thoroughly examined by a competent person and a certificate of the test and examination specifying the safe working load and signed by the person making the test and examination has been obtained and is kept available for inspection;
(f)every chain and lifting tackle except a rope sling shall, unless of a class or description exempted by certificate of the chief inspector upon the ground that it is made of such material or so constructed that it cannot be subjected to heat treatment without risk of damage or that it has been subjected to some form of heat treatment (other than annealing) approved by him, be annealed at least once in every fourteen months or, in the case of chains or slings of [F113 millimetres] bar or smaller, or chains used in connection with molten metal or molten slag, in every six months, except that chains and lifting tackle not in regular use need be annealed only when necessary;
(g)a register containing the prescribed particulars shall be kept in respect of all such chains, ropes or lifting tackle, except fibre rope slings.
(2)Paragraph (b) of subsection (1) of this section shall not apply in relation to any lifting tackle if its safe working load or, in the case of a multiple sling, the safe working load at different angles of the legs is plainly marked upon it.
(3)In this section “lifting tackle” means chain slings, rope slings, rings, hooks, shackles and swivels.
Textual Amendments
F1Words substituted by S.I. 1983/978, regs. 3, 4, Sch. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: