- Latest available (Revised)
- Point in Time (03/04/2006)
- Original (As enacted)
Version Superseded: 01/10/2006
Point in time view as at 03/04/2006.
Registered Designs Act 1949, Cross Heading: Registrable designs and proceedings for registration is up to date with all changes known to be in force on or before 13 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
(1)A design may, subject to the following provisions of this Act, be registered under this Act on the making of an application for registration.
(2)In this Act “design” means the appearance of the whole or a part of a product resulting from the features of, in particular, the lines, contours, colours, shape, texture or materials of the product or its ornamentation.
(3)In this Act—
“complex product” means a product which is composed of at least two replaceable component parts permitting disassembly and reassembly of the product; and
“product” means any industrial or handicraft item other than a computer program; and, in particular, includes packaging, get-up, graphic symbols, typographic type-faces and parts intended to be assembled into a complex product.]
Textual Amendments
F1Ss. 1-1D substituted (9.12.2001) for s. 1 by S.I. 2001/3949, reg. 2 (with transitional provisions in regs. 10-14)
(1)The following shall be refused registration under this Act—
(a)anything which does not fulfil the requirements of section 1(2) of this Act;
(b)designs which do not fulfil the requirements of sections 1B to 1D of this Act;
(c)designs to which a ground of refusal mentioned in Schedule A1 to this Act applies.
(2)A design (“the later design”) shall be refused registration under this Act if it is not new or does not have individual character when compared with a design which—
(a)has been made available to the public on or after the relevant date; but
(b)is protected as from a date prior to the relevant date by virtue of registration under this Act[F3or the Community Design Regulation] or an application for such registration.
(3)In subsection (2) above “the relevant date” means the date on which the application for the registration of the later design was made or is treated by virtue of section 3B(2), (3) or (5) or 14(2) of this Act as having been made.]
Textual Amendments
F2Ss. 1-1D substituted (9.12.2001) for s. 1 by S.I. 2001/3949, reg. 2 (with transitional provisions in regs. 10-14)
F3Words in s. 1A(2)(b) inserted (1.4.2003) by Registered Designs Regulations 2003 (S.I. 2003/550), regs. 1(1), 2(2) (with regs. 3-5)
(1)A design shall be protected by a right in a registered design to the extent that the design is new and has individual character.
(2)For the purposes of subsection (1) above, a design is new if no identical design or no design whose features differ only in immaterial details has been made available to the public before the relevant date.
(3)For the purposes of subsection (1) above, a design has individual character if the overall impression it produces on the informed user differs from the overall impression produced on such a user by any design which has been made available to the public before the relevant date.
(4)In determining the extent to which a design has individual character, the degree of freedom of the author in creating the design shall be taken into consideration.
(5)For the purposes of this section, a design has been made available to the public before the relevant date if—
(a)it has been published (whether following registration or otherwise), exhibited, used in trade or otherwise disclosed before that date; and
(b)the disclosure does not fall within subsection (6) below.
(6)A disclosure falls within this subsection if—
(a)it could not reasonably have become known before the relevant date in the normal course of business to persons carrying on business in the European Economic Area and specialising in the sector concerned;
(b)it was made to a person other than the designer, or any successor in title of his, under conditions of confidentiality (whether express or implied);
(c)it was made by the designer, or any successor in title of his, during the period of 12 months immediately preceding the relevant date;
(d)it was made by a person other than the designer, or any successor in title of his, during the period of 12 months immediately preceding the relevant date in consequence of information provided or other action taken by the designer or any successor in title of his; or
(e)it was made during the period of 12 months immediately preceding the relevant date as a consequence of an abuse in relation to the designer or any successor in title of his.
(7)In subsections (2), (3), (5) and (6) above “the relevant date” means the date on which the application for the registration of the design was made or is treated by virtue of section 3B(2), (3) or (5) or 14(2) of this Act as having been made.
(8)For the purposes of this section, a design applied to or incorporated in a product which constitutes a component part of a complex product shall only be considered to be new and to have individual character—
(a)if the component part, once it has been incorporated into the complex product, remains visible during normal use of the complex product; and
(b)to the extent that those visible features of the component part are in themselves new and have individual character.
(9)In subsection (8) above “normal use” means use by the end user; but does not include any maintenance, servicing or repair work in relation to the product.]
Textual Amendments
F4Ss. 1-1D substituted (9.12.2001) for s. 1 by S.I. 2001/3949, reg. 2 (with transitional provisions in regs. 10-14)
(1)A right in a registered design shall not subsist in features of appearance of a product which are solely dictated by the product’s technical function.
(2)A right in a registered design shall not subsist in features of appearance of a product which must necessarily be reproduced in their exact form and dimensions so as to permit the product in which the design is incorporated or to which it is applied to be mechanically connected to, or placed in, around or against, another product so that either product may perform its function.
(3)Subsection (2) above does not prevent a right in a registered design subsisting in a design serving the purpose of allowing multiple assembly or connection of mutually interchangeable products within a modular system.]
Textual Amendments
F5Ss. 1-1D substituted (9.12.2001) for s. 1 by S.I. 2001/3949, reg. 2 (with transitional provisions in regs. 10-14)
A right in a registered design shall not subsist in a design which is contrary to public policy or to accepted principles of morality.]
Textual Amendments
F6Ss. 1-1D substituted (9.12.2001) for s. 1 by S.I. 2001/3949, reg. 2 (with transitional provisions in regs. 10-14)
[F7(1)The author of a design shall be treated for the purposes of this Act as the original proprietor of the design, subject to the following provisions.
(1A)Where a design is created in pursuance of a commission for money or money’s worth, the person commissioning the design shall be treated as the original proprietor of the design.
(1B)Where, in a case not falling within subsection (1A), a design is created by an employee in the course of his employment, his employer shall be treated as the original proprietor of the design.]
(2)Where a design F8. . . becomes vested, whether by assignment, transmission or operation of law, in any person other than the original proprietor, either alone or jointly with the original proprietor, that other person, or as the case may be the original proprietor and that other person, shall be treated for the purposes of this Act as the proprietor of the design F9. . ..
[F10(3)In this Act the “author” of a design means the person who creates it.
(4)In the case of a design generated by computer in circumstances such that there is no human author, the person by whom the arrangements necessary for the creation of the design are made shall be taken to be the author.]
Textual Amendments
F7S. 2(1) substituted by Copyright, Designs and Patents Act 1988 (c. 48, SIF 67A), s. 267(2)
F8Words in s. 2(2) repealed (9.12.2001) by S.I. 2001/3949, reg. 9(2), Sch. 2 (with transitional provisions in regs. 10-14)
F9Words in s. 2(2) repealed (9.12.2001) by S.I. 2001/3949, reg. 9(2), Sch. 2 (with transitional provisions in regs. 10-14)
F10S. 2(3)(4) inserted by Copyright, Designs and Patents Act 1988 (c. 48, SIF 67A), s. 267(3)(4)
(1)An application for the registration of a design shall be made in the prescribed form and shall be filed at the Patent Office in the prescribed manner.
(2)An application for the registration of a design shall be made by the person claiming to be the proprietor of the design.
(3)An application for the registration of a design in which national unregistered design right subsists shall be made by the person claiming to be the design right owner.
(4)For the purpose of deciding whether, and to what extent, a design is new or has individual character, the registrar may make such searches (if any) as he thinks fit.
(5)An application for the registration of a design which, owing to any default or neglect on the part of the applicant, has not been completed so as to enable registration to be effected within such time as may be prescribed shall be deemed to be abandoned.]
Textual Amendments
F11Ss. 3-3D substituted (9.12.2001) for s. 3 by S.I. 2001/3949, reg. 4 (with transitional provisions in regs. 10-14)
(1)Subject as follows, the registrar shall not refuse an application for the registration of a design.
(2)If it appears to the registrar that an application for the registration of a design has not been made in accordance with any rules made under this Act, he may refuse the application.
(3)If it appears to the registrar that an application for the registration of a design has not been made in accordance with sections 3(2) and (3) and 14(1) of this Act, he shall refuse the application.
(4)If it appears to the registrar that any ground for refusal of registration mentioned in section 1A of this Act applies in relation to an application for the registration of a design, he shall refuse the application.]
Textual Amendments
F12Ss. 3-3D substituted (9.12.2001) for s. 3 by S.I. 2001/3949, reg. 4 (with transitional provisions in regs. 10-14)
(1)The registrar may, at any time before an application for the registration of a design is determined, permit the applicant to make such modifications of the application as the registrar thinks fit.
(2)Where an application for the registration of a design has been modified before it has been determined in such a way that the design has been altered significantly, the registrar may, for the purpose of deciding whether and to what extent the design is new or has individual character, direct that the application shall be treated as having been made on the date on which it was so modified.
(3)Where—
(a)an application for the registration of a design has disclosed more than one design and has been modified before it has been determined to exclude one or more designs from the application; and
(b)a subsequent application for the registration of a design so excluded has, within such period (if any) as has been prescribed for such applications, been made by the person who made the earlier application or his successor in title,
the registrar may, for the purpose of deciding whether and to what extent the design is new or has individual character, direct that the subsequent application shall be treated as having been made on the date on which the earlier application was, or is treated as having been, made.
(4)Where an application for the registration of a design has been refused on any ground mentioned in section 1A(1)(b) or (c) of this Act, the application may be modified by the applicant if it appears to the registrar that—
(a)the identity of the design is retained; and
(b)the modifications have been made in accordance with any rules made under this Act.
(5)An application modified under subsection (4) above shall be treated as the original application and, in particular, as made on the date on which the original application was made or is treated as having been made.
(6)Any modification under this section may, in particular, be effected by making a partial disclaimer in relation to the application.]
Textual Amendments
F13Ss. 3-3D substituted (9.12.2001) for s. 3 by S.I. 2001/3949, reg. 4 (with transitional provisions in regs. 10-14)
(1)Subject as follows, a design, when registered, shall be registered as of the date on which the application was made or is treated as having been made.
(2)Subsection (1) above shall not apply to an application which is treated as having been made on a particular date by section 14(2) of this Act or by virtue of the operation of section 3B(3) or (5) of this Act by reference to section 14(2) of this Act.
(3)A design, when registered, shall be registered as of—
(a)in the case of an application which is treated as having been made on a particular date by section 14(2) of this Act, the date on which the application was made;
(b)in the case of an application which is treated as having been made on a particular date by virtue of the operation of section 3B(3) of this Act by reference to section 14(2) of this Act, the date on which the earlier application was made;
(c)in the case of an application which is treated as having been made on a particular date by virtue of the operation of section 3B(5) of this Act by reference to section 14(2) of this Act, the date on which the original application was made.]
Textual Amendments
F14Ss. 3-3D substituted (9.12.2001) for s. 3 by S.I. 2001/3949, reg. 4 (with transitional provisions in regs. 10-14)
An appeal lies from any decision of the registrar under section 3A or 3B of this Act.]
Textual Amendments
F15Ss. 3-3D substituted (9.12.2001) for s. 3 by S.I. 2001/3949, reg. 4 (with transitional provisions in regs. 10-14)
Textual Amendments
F16S. 4 repealed (9.12.2001) by S.I. 2001/3949, reg. 9(2), Sch. 2 (with transitional provisions in regs. 10-14)
(1)Where, either before or after the commencement of this Act, an application for the registration of a design has been made, and it appears to the registrar that the design is one of a class notified to him by [F17the Secretary of State] as relevant for defence purposes, he may give directions for prohibiting or restricting the publication of information with respect to the design, or the communication of such information to any person or class of persons specified in the directions.
[F18(2)The Secretary of State shall by rules make provision for securing that where such directions are given—
(a)the representation or specimen of the design, F19. . .
(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
shall not be open to public inspection at the Patent Office during the continuance in force of the directions.]
(3)Where the registrar gives any such directions as aforesaid, he shall give notice of the application and of the directions to [F17the Secretary of State], and thereupon the following provisions shall have effect, that is to say:—
(a)[F17the Secretary of State] shall, upon receipt of such notice, consider whether the publication of the design would be prejudicial to the defence of the realm and unless a notice under paragraph (c) of this subsection has previously been given by that authority to the registrar, shall reconsider that question before the expiration of nine months from the date of filing of the application for registration of the design and at least once in every subsequent year;
(b)for the purpose aforesaid, [F17the Secretary of State] may, at any time after the design has been registered or, with the consent of the applicant, at any time before the design has been registered, inspect the representation or specimen of the design F20. . . filed in pursuance of the application;
(c)if upon consideration of the design at any time it appears to [F17the Secretary of State] that the publication of the design would not, or would no longer, be prejudicial to the defence of the realm, [F21he] shall give notice to the registrar to that effect;
(d)on the receipt of any such notice the registrar shall revoke the directions and may, subject to such conditions, if any, as he thinks fit, extend the time for doing anything required or authorised to be done by or under this Act in connection with the application or registration, whether or not that time has previously expired.
(4)No person resident in the United Kingdom shall, except under the authority of a written permit granted by or on behalf of the registrar, make or cause to be made any application outside the United Kingdom for the registration of a design of any class prescribed for the purposes of this subsection unless—
(a)an application for registration of the same design has been made in the United Kingdom not less than six weeks before the application outside the United Kingdom; and
(b)either no directions have been given under subsection (1) of this section in relation to the application in the United Kingdom or all such directions have been revoked:
Provided that this subsection shall not apply in relation to a design for which an application for protection has first been filed in a country outside the United Kingdom by a person resident outside the United Kingdom.
(5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F22
Textual Amendments
F17Words substituted by Copyright, Designs and Patents Act 1988 (c. 48, SIF 67A), s. 272, Sch. 3 para. 3(2)
F18S. 5(2) substituted by Copyright, Designs and Patents Act 1988 (c. 48, SIF 67A), s. 272, Sch. 3 para. 3(3)
F19S. 5(2)(b) and the preceding word “and” repealed (9.12.2001) by S.I. 2001/3949, reg. 9(2), Sch. 2 (with transitional provisions in regs. 10-14)
F20Words in s. 5(3)(b) repealed (9.12.2001) by S.I. 2001/3949, reg. 9(2), Sch. 2 (with transitional provisions in regs. 10-14)
F21Words substituted by Copyright, Designs and Patents Act 1988 (c. 48, SIF 67A), s. 272, Sch. 3 para. 3(2)
F22S. 5(5) repealed by Copyright, Designs and Patents Act 1988 (c. 48, SIF 67A), ss. 272, 303(2), Sch. 3 para. 3(5), Sch. 8
Textual Amendments
F23S. 6 repealed (9.12.2001) by S.I. 2001/3949, reg. 9(2), Sch. 2 (with transitional provisions in regs. 10-14)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: