- Latest available (Revised)
- Point in Time (01/08/1992)
- Original (As made)
Version Superseded: 01/01/1993
Point in time view as at 01/08/1992.
This revised version has been created from an electronic version contributed by Westlaw which was originally derived from the printed publication. Read more
The Road Vehicles (Construction and Use) Regulations 1986, Cross Heading: Glass is up to date with all changes known to be in force on or before 24 February 2025. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
31.—(1) This regulation applies to a motor vehicle which is—E+W+S
(a) a wheeled vehicle, not being a caravan, first used before 1st June 1978;
(b) a caravan first used before 1st September 1978; or
(c) a track-laying vehicle.
(2) The glass fitted to any window specified in an item in column 3 of the Table of a vehicle of a class specified in that item in column 2 shall be safety glass.
(regulation 31(2))
1 | 2 | 3 |
---|---|---|
Item | Class of vehicle | Windows |
1 | Wheeled vehicles first used on or after 1st January 1959, being passenger vehicles or dual-purpose vehicles. | Wind screens and all outside windows. |
2 | Wheeled vehicles first used on or after 1st January 1959, being goods vehicles (other than dual-purpose vehicles), locomotives or motor tractors. | Windscreens and all windows in front of and on either side of the driver's seat. |
3 | Wheeled vehicles not mentioned in item 1 or 2. | Windscreens and windows facing to the front on the outside, except glass fitted to the upper decks of a double-decked vehicle. |
4 | Track-laying vehicles. | Windscreens and windows facing to the front. |
(3) For the purposes of this regulation any windscreen or window at the front of the vehicle the inner surface of which is at an angle exceeding 30 degrees to the longitudinal axis of the vehicle shall be deemed to face to the front.
[F1(4) In this regulation and in regulation 32–
“caravan” means a trailer which is constructed (and not merely adapted) for human habitation; and
“safety glass” means glass so constructed or treated that if fractured it does not fly into fragments likely to cause severe cuts.]
Textual Amendments
F1Reg. 31(4) substituted (6.5.1987) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1987 (S.I. 1987/676), regs. 1(2), 15(1)
Commencement Information
32.—(1) This regulation applies to—E+W+S
(a) a caravan first used on or after 1st September 1978, and
(b) a wheeled motor vehicle and a wheeled trailer, not being a caravan, first used on or after 1st June 1978.
(2) Save as provided in paragraphs (3) to (9) the windows specified in column 2 of Table I in relation to a vehicle of a class specified in that column shall be constructed of the material specified in column 3 of that Table.
(regulation 32(2))
1 | 2 | 3 |
---|---|---|
Item | Window | Material |
1 | Windscreens and other windows wholly or partly on either side of the driver's seat fitted to motor vehicles first used on or after 1st April 1985. | Specified safety glass (1980). |
2 | Windscreens and other windows wholly or partly on either side of the driver's seat fitted to a motor vehicles first used before 1st April 1985. | Specified safety glass, or specified safety glass (1980). |
3 | All other windows. | Specified safety glass, specified safety glass (1980), or safety glazing. |
(3) The windscreens and all other windows of security vehicles or vehicles being used for police purposes shall not be subject to the requirements specified in paragraph (2), but shall be constructed of either safety glass or safety glazing.
(4) The windscreens of motorcycles not equipped with an enclosed compartment for the driver or for a passenger shall not be subject to the requirements specified in paragraph (2), but shall be constructed of safety glazing.
(5) Any windscreens or other windows which are wholly or partly in front of or on either side of the driver's seat, and which are temporarily fitted to motor vehicles to replace any windscreens or other windows which have broken, shall—
(a) be constructed of safety glazing; and
(b) be fitted only while the vehicles are being driven or towed either to premises where new windscreens or other windows are to be permanently fitted to replace the windscreens or other windows which have broken, or to complete the journey in the course of which the breakage occurred.
(6) Windows forming all or part of a screen or door in the interior of a bus first used on or after 1st April 1988, shall be constructed either of safety glazing or of specified safety glass (1980).
(7) Windows being—
(a) windows (other than windscreens) of motor vehicles being engineering plant, industrial tractors, agricultural motor vehicles (other than agricultural motor vehicles first used on or after 1st June 1986 and driven at more than 20 mph) which are wholly or partly in front of or on either side of the driver's seat;
(b) windows of the upper deck of a double-decked bus; or
(c) windows in the roof of a vehicle,
shall be constructed of either specified safety glass, specified safety glass (1980) or safety glazing.
(8) In the case of motor vehicles and trailers which have not at any time been fitted with permanent windows and which are being driven or towed to a place where permanent windows are to be fitted, any temporary windscreens and any other temporary windows shall be constructed of either specified safety glass, specified safety glass (1980) or safety glazing.
(9) No requirement in this regulation that a windscreen or other window shall be constructed of specified safety glass or of specified safety glass (1980) shall apply to a windscreen or other window which is—
(a) manufactured in France;
(b) marked with a marking consisting of the letters “TP GS” or “TP GS E”; and
(c) fitted to a vehicle first used before 1st October 1986.
(10) Save as provided in paragraph (11), the windscreens or other windows constructed in accordance with the foregoing provisions of this regulation of specified safety glass, specified safety glass (1980) or safety glazing and specified in column 3 of Table II in relation to a vehicle of a class specified in column 2 of that Table shall have a visual transmission for light of not less than the percentage specified in relation to those windows in column 4 when measured perpendicular to the surface in accordance with the procedure specified in a document specified in relation to those windows in column 5.
(regulation 32(10))
1 | 2 | 3 | 4 | 5 |
---|---|---|---|---|
Item | Class of Vehicles | Windows | Percentage | Documents specifying procedure |
1 | Motor vehicles first used before 1st April 1985 | All windows | 70 | British Standard Specification No. 857 or No. 5282 |
2 | Motor vehicles first used on or after 1st April 1985 and trailers | (a) Windscreens | 75 | The documents mentioned in sub-paragraph (i), (ii) or (iii) of the definition in paragraph (13) of “specified safety glass (1980).” |
(b) All other windows | 70 |
(11) Paragraph (10) does not apply to—
(a) any part of any windscreen which is outside the vision reference zone;
(b) windows through which the driver when in the driver's seat is unable at any time to see any part of the road on which the vehicle is waiting or proceeding;
(c) windows in any motor ambulance which are not wholly or partly in front of or on either side of any part of the driver's seat; or
(d) windows in any bus, goods vehicle, locomotive, or motor tractor other than windows which—
(i) are wholly or partly in front of or on either side of any part of the driver's seat;
(ii)face the rear of the vehicle; or
(iii)form the whole or part of a door giving access to or from the exterior of the vehicle.
(12) For the purposes of this regulation any window at the rear of the vehicle is deemed to face the rear of the vehicle if the inner surface of such window is at an angle exceeding 30 degrees to the longitudinal axis of the vehicle.
(13) In this regulation, unless the context otherwise requires—
“British Standard Specification No. 857” means
“British Standard Specification No. 5282” means
“British Standard Specification BS AU 178” means
F2...
F2...
“safety glazing” means
“security vehicle” means
persons who are likely to require protection from any criminal offence involving violence; or
dangerous substances, bullion, money, jewellery, documents or other goods or burden which, by reason of their nature or value, are likely to require protection from any criminal offence;
“specified safety glass” means
British Standard Specification No. 857 (including the requirements as to marking); or
British Standard Specification No. 5282 (including the requirements as to marking);
“specified safety glass (1980)” means
the British Standard Specification for Safety Glass for Land Transport published on 30th June 1967 under the number BS 857 as amended by Amendment Slip No. 1 published on 15th January 1973 under the number AMD 1088, Amendment Slip No. 2 published on 30th September 1980 under the number AMD 3402, and Amendment Slip No. 4 published on 15th February 1981 under the number AMD 3548 (including the requirements as to marking); or
British Standard Specification BS AU 178 (including the requirements as to marking); or
ECE Regulation 43 (including the requirements as to marking).
“vision reference zone” means
the primary vision area as defined in British Standard Specification No. 857;
Zone 1, as defined in British Standard Specification No. 5282;
Zone B (as regards passenger vehicles other than buses) and Zone 1 (as regards all other vehicles) as defined in British Standard Specification BS AU 178 and in ECE Regulation 43; and
“windscreen”
Textual Amendments
F2Words in reg. 32(13) omitted (6.5.1987) by virtue of The Road Vehicles (Construction and Use) (Amendment) Regulations 1987 (S.I. 1987/676), regs. 1(2), 15(2)
Commencement Information
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: