The Furniture and Furnishings (Fire) (Safety) Regulations 1988

Regulations 3, 6 and 7

SCHEDULE 1 U.K.

Commencement Information

I1 Sch. 1 in force at 1.11.1988, see reg. 1(2)(a)

PART I U.K.

Ignitability test for polyurethane foam in slab or cushion form.

1.  The foam shall be tested in accordance with the method set out in BS 5852: Part 2 using cover fabric corresponding to the specification set out in paragraph 2 below. U.K.

[F1 2.   The fabric shall be made of 100 per cent flame retardant polyester fibre. U.K.

The construction of the fabric shall be woven to a plain weave.

The yarn in the warp shall be spun to a linear density of 37 tex plus or minus 10 per cent.

The yarn in the weft shall be spun to a linear density of 100 tex plus or minus 10 per cent.

The fabric shall be scoured and heat set.

The fabric shall be woven so as to have a finished fabric construction of—

(a)

20.5 plus or minus 1 yarn threads per centimetre in the warp and

(b)

12.5 plus or minus 1 yarn threads per centimetre in the weft.

Its mass shall be 220 grammes per square metre plus or minus 5 per cent.]

Textual Amendments

F1 Sch. 1 Pt. 1 para. 2 substituted (1.10.2010) by The Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 2010 (S.I. 2010/2205), regs. 1, 2(2)

3.  The test rig as specified in clause 6.1.1 of BS 5852: Part 2 shall have expanded steel platforms of not less than 28×6 mm mesh size. The test rig is placed on a metal tray of sufficient dimensions to collect any debris falling from specimens being tested. The rig and debris tray shall be mounted on a weighing balance with a remote readout having a full-scale deflection of at least 0 to 20 kg to an accuracy of 2 g. U.K.

4.  The foam under test, cut to the specified dimensions is placed on the test rig, covered with the fabric specified in paragraph 2 above and tensioned with clips as set out in BS 5852: Part 2. An ignition source 5 crib is placed in position. The mass of the complete assembly is determined (“initial mass”). The test shall be carried out in accordance with BS 5852: Part 2. In particular flaming or smouldering failure shall be determined against the criteria of clause 4 of BS 5852: Part 2. U.K.

After flaming and smouldering has ceased, any debris which has become detached from the specimen shall be removed. The remaining mass of the assembly (“final mass”) is then recorded.

5.  If failure against the criteria of clause 4 of BS 5852: Part 2 has occurred but only by way of damage exceeding the limits defined in clauses 4.1(e), 4.1(f) and 4.2(f) and provided that the resultant mass loss (initial mass less final mass) is less than 60 g the foam passes the ignitability test. U.K.

PART II U.K.

Ignitability test for polyurethane foam in crumb form.

1.  The foam shall be tested in accordance with the method set out in BS 5852: Part 2 using cover fabric corresponding to the specification set out in paragraph 2 below. U.K.

[F2 2.   The fabric shall be made of 100 per cent flame retardant polyester fibre. U.K.

The construction of the fabric shall be woven to a plain weave.

The yarn in the warp shall be spun to a linear density of 37 tex plus or minus 10 per cent.

The yarn in the weft shall be spun to a linear density of 100 tex plus or minus 10 per cent.

The fabric shall be scoured and heat set.

The fabric shall be woven so as to have a finished fabric construction of—

(a)

20.5 plus or minus 1 yarn threads per centimetre in the warp and

(b)

12.5 plus or minus 1 yarn threads per centimetre in the weft.

Its mass shall be 220 grammes per square metre plus or minus 5 per cent.]

Textual Amendments

F2 Sch. 1 Pt. 2 para. 2 substituted (1.10.2010) by The Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 2010 (S.I. 2010/2205), regs. 1, 2(2)

3.  The test rig panels are lined with the fabric specified in paragraph 2 above. Sufficient crumb foam shall be placed upon the seat and back panels so that when the cover fabric piece is placed over them, both are stuffed to the density used in the furniture as intended. The test is then carried out in accordance with BS 5852: Part 2 using ignition source 2 as specified therein. U.K.

4.  If smouldering or flaming failure against the criteria of clause 4 of BS 5852: Part 2 has not occurred or has occurred only by way of damage exceeding the limits defined in Clauses 4.1(e), 4.1(f) and 4.2(f), the crumb foam passes the ignitability test. U.K.

PART III U.K.

Ignitability test for latex rubber foam.

1.  The foam shall be tested in accordance with the method set out in BS 5852: Part 2 using cover fabric corresponding to the specification set out in paragraph 2 below. U.K.

[F3 2.   The fabric shall be made of 100 per cent flame retardant polyester fibre. U.K.

The construction of the fabric shall be woven to a plain weave.

The yarn in the warp shall be spun to a linear density of 37 tex plus or minus 10 per cent.

The yarn in the weft shall be spun to a linear density of 100 tex plus or minus 10 per cent.

The fabric shall be scoured and heat set.

The fabric shall be woven so as to have a finished fabric construction of—

(a)

20.5 plus or minus 1 yarn threads per centimetre in the warp and

(b)

12.5 plus or minus 1 yarn threads per centimetre in the weft.

Its mass shall be 220 grammes per square metre plus or minus 5 per cent.]

Textual Amendments

F3 Sch. 1 Pt. 3 para. 2 substituted (1.10.2010) by The Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 2010 (S.I. 2010/2205), regs. 1, 2(2)

3.  The foam under test cut to the specified dimensions is placed on the test rig, covered with the fabric specified in paragraph 2 above and tensioned with clips as set out in BS 5852: Part 2. The test is then carried out using ignition source 2 as specified therein. U.K.

4.  If smouldering or flaming failure against the criteria of clause 4 of BS 5852: Part 2 does not occur, the latex rubber foam passes the ignitability test. U.K.