- Latest available (Revised)
- Point in Time (01/10/1994)
- Original (As made)
Point in time view as at 01/10/1994.
There are currently no known outstanding effects for the The Road Vehicles Lighting Regulations 1989, SCHEDULE 11.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
(Regulations 18 and 20)
1. Number: | One |
2. Position– (a) Longitudinal: | At or near the rear of the vehicle |
(b) Lateral– (i)Where one rear fog lamp is fitted: | On the centre-line or off side of the vehicle (disregarding any sidecar forming part of a motor bicycle combination) |
(ii)Where two lamps are fitted: | No requirement |
(c) Vertical– (i)Maximum height above the ground– (A)Any vehicle not covered by sub-paragraph (B): | 1000 mm |
(B)An agricultural vehicle, engineering plant and a motor tractor: | 2100 mm |
(ii)Minimum height above the ground: | 250 mm |
(d) Minimum separation distance between a rear fog lamp and a stop lamp– (i)In the case of a rear fog lamp which does not share a common lamp body with a stop lamp: | A distance of 100 mm between the light-emitting surfaces of the lamps when viewed in a direction parallel to the longitudinal axis of the vehicle |
(ii)In the case of a rear fog lamp which shares a common lamp body with a stop lamp: | 100 mm |
3. Angles of visibility– (a) Horizontal: | 25° inwards and outwards. However, where two rear fog lamps are fitted it shall suffice if throughout the sector so defined at least one lamp (but not necessarily the same lamp) is visible |
(b) Vertical: | 5° above and below the horizontal |
4. Alignment: | To the rear |
5. Markings: | An approval mark |
6. Size of illuminated area: | No requirement |
7. Colour: | Red |
8. Wattage: | No requirement |
9. Intensity: | No requirement |
10. Electrical connections: | No rear fog lamp shall be fitted to any vehicle so that it can be illuminated by the application of any braking system on the vehicle |
11. Tell-tale: | A circuit-closed tell-tale shall be fitted |
Commencement Information
I1Sch. 11 Pt. I para. 1 in force at 1.11.1989, see reg. 1(1)
I2Sch. 11 Pt. I para. 2 in force at 1.11.1989, see reg. 1(1)
I3Sch. 11 Pt. I para. 3 in force at 1.11.1989, see reg. 1(1)
I4Sch. 11 Pt. I para. 4 in force at 1.11.1989, see reg. 1(1)
I5Sch. 11 Pt. I para. 5 in force at 1.11.1989, see reg. 1(1)
I6Sch. 11 Pt. I para. 6 in force at 1.11.1989, see reg. 1(1)
I7Sch. 11 Pt. I para. 7 in force at 1.11.1989, see reg. 1(1)
I8Sch. 11 Pt. I para. 8 in force at 1.11.1989, see reg. 1(1)
I9Sch. 11 Pt. I para. 9 in force at 1.11.1989, see reg. 1(1)
I10Sch. 11 Pt. I para. 10 in force at 1.11.1989, see reg. 1(1)
I11Sch. 11 Pt. I para. 11 in force at 1.11.1989, see reg. 1(1)
12. Other requirements–E+W+S
Where two rear fog lamps are fitted to a motor vehicle first used on or after 1st April 1986 or to a trailer manufactured on or after 1st October 1985 they shall form a matched pair.
Commencement Information
I12Sch. 11 Pt. I para. 12 in force at 1.11.1989, see reg. 1(1)
13. Definitions–E+W+S
In this Schedule “approval mark” means either–
a marking designated as an approval mark by regulation 5 of the Designation of Approval Marks Regulations and shown at item 20 of Schedule 4 to those Regulations; or
a marking designated as an approval mark by regulation 4 of the Designation of Approval Marks Regulations and shown at item 38 of Schedule 2 to those Regulations.
Commencement Information
I13Sch. 11 Pt. I para. 13 in force at 1.11.1989, see reg. 1(1)
1. In the case of a motor vehicle first used before 1st April 1980 and any other vehicle manufactured before 1st October 1979, any number may be fitted and the only requirements prescribed by these Regulations in respect of any which are fitted are those specified in paragraphs 2(d), 7 and 10 of Part I.E+W+S
Commencement Information
I14Sch. 11 Pt. II para. 1 in force at 1.11.1989, see reg. 1(1)
2. In the case of a motor vehicle first used on or after 1st April 1980 and any other vehicle manufactured on or after 1st October 1979, not more than two may be fitted and the requirements prescribed by these Regulations in respect of any which are fitted are all those specified in this Schedule.E+W+S
Commencement Information
I15Sch. 11 Pt. II para. 2 in force at 1.11.1989, see reg. 1(1)
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: