- Latest available (Revised)
- Point in Time (01/01/1995)
- Original (As made)
Version Superseded: 14/04/1999
Point in time view as at 01/01/1995. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Personal Protective Equipment at Work Regulations 1992, Section 4.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
4.—(1) Every employer shall ensure that suitable personal protective equipment is provided to his employees who may be exposed to a risk to their health or safety while at work except where and to the extent that such risk has been adequately controlled by other means which are equally or more effective.
(2) Every self-employed person shall ensure that he is provided with suitable personal protective equipment where he may be exposed to a risk to his health or safety while at work except where and to the extent that such risk has been adequately controlled by other means which are equally or more effective.
(3) Without prejudice to the generality of paragraphs (1) and (2), personal protective equipment shall not be suitable unless—
(a)it is appropriate for the risk or risks involved and the conditions at the place where exposure to the risk may occur;
(b)it takes account of ergonomic requirements and the state of health of the person or persons who may wear it;
(c)it is capable of fitting the wearer correctly, if necessary, after adjustments within the range for which it is designed;
(d)so far as is practicable, it is effective to prevent or adequately control the risk or risks involved without increasing overall risk;
(e)it complies with any enactment (whether in an Act or instrument) which implements in Great Britain any provision on design or manufacture with respect to health or safety in any relevant Community directive listed in Schedule 1 which is applicable to that item of personal protective equipment.
Modifications etc. (not altering text)
C1Reg. 4(3)(e) restricted (temp.) (1.1.1995) by The Personal Protective Equipment (EC Directive) (Amendment) Regulations 1994 (S.I. 1994/2326), regs. 1(3), 5
Commencement Information
I1Reg. 4 in force at 1.1.1993, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.