- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
3.—(1) The cutter or cutters of every horizontal milling machine shall be fenced, by a strong guard properly adjusted to the work, which shall enclose the whole cutting surface except such part as is necessarily exposed for the milling operations.
(2) The guard shall either:—
(a)be provided with adequate side flanges; or
(b)extend on each side of the cutter or cutters to the end of the arbor, or to the arbor support, or to a distance of not less than half the diameter of the cutter,
provided that sub–paragraph (2) of this paragraph shall not apply to cutters used for face milling.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: