Search Legislation

The Merchant Shipping (Registration of Ships) Regulations 1993

 Help about what version

What Version

 Help about advanced features

Advanced Features

More Resources

Changes over time for: SCHEDULE 3

 Help about opening options

Alternative versions:

Status:

Point in time view as at 31/12/2020.

Changes to legislation:

There are currently no known outstanding effects for the The Merchant Shipping (Registration of Ships) Regulations 1993, SCHEDULE 3. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Regulations 32, 34, 54 and 80

SCHEDULE 3U.K.CARVING AND MARKING

1.  Every ship is required, before it may be registered, to be marked permanently and conspicuously to the satisfaction of the Registrar in accordance with this Schedule.U.K.

Commencement Information

I1Sch. 3 para. 1 in force at 21.3.1994, see reg. 1(1)

2.  The Secretary of State may exempt any class of ship from all or any of the requirements of this Schedule, subject to such conditions, if any, as he thinks fit.U.K.

Commencement Information

I2Sch. 3 para. 2 in force at 21.3.1994, see reg. 1(1)

3.  Subject to any exemption in respect of that class of ship, a ship other than:—U.K.

(a)a fishing vessel,

(b)a pleasure vessel which is under 24 metres,

is to be marked as follows:

(i)its name shall be marked on each of its bows, and its name and its port of choice must be marked on its stern;

(ii)the marking is to be on a dark ground in white or yellow letters, or on a light ground in black letters, the letters being not less than 10 centimetres high and of proportional breadth; and

(iii)its official number and the number denoting its registered tonnage shall be cut on its main beam or if that is not possible, marked or fixed thereon in the manner prescribed in paragraph 4(a) below.

Commencement Information

I3Sch. 3 para. 3 in force at 21.3.1994, see reg. 1(1)

4.  A pleasure vessel which is under 24 metres in length is to be marked as follows:—U.K.

(a)the official number and registered tonnage are:—

(i)to be marked on the main beam or, if there is no main beam, on a readily accessible visible permanent part of the structure of the pleasure vessel either by cutting in, centre punching or raised lettering, or

(ii)to be engraved on plates of metal, wood or plastic, secured to the main beam (or, if there is no main beam, to a readily accessible visible permanent part of the structure) with rivets, through bolts with the ends clenched), or screws with the slots removed;

(b)the name and port of choice (unless an exempted ship), are to be marked on a conspicuous and permanent part of the stern on a dark ground in white or yellow letters, or on a light ground in black letters, the letters being not less than 5 centimetres high and of proportionate breadth, or, where this is not possible by the alternative methods given below:—

(i)by engraving on plates of metal or of plastic or by cutting in on a shaped wooden chock.Where a shaped wooden chock is used it should be secured to the hull through bolts, the ends being clenched, or

(ii)by individual glass reinforced plastic letters and numbers approximately 2mm in thickness.These to be fixed to the hull with epoxy adhesive, and painted with suitable paint and coated with translucent epoxy resin;

(iii)where metal or plastic plates have been used these must be fixed by the use of epoxy adhesives.Metal or plastic plates secured by adhesives should be coated with translucent epoxy resin after they have been fixed in position.

Commencement Information

I4Sch. 3 para. 4 in force at 21.3.1994, see reg. 1(1)

5.  A fishing vessel is to be marked as follows:—U.K.

(a)The name of the vessel and the port of choice shall be painted in white on a black background or in black on a white background outside the stern of the boat in letters which shall not be less than 8 centimetres in height and 1.5 centimetres in breadth, and

(b)the port letters and the [F1port number] shall be painted or displayed on both sides of the bow and on each quarter, as high above the water as possible so as to be clearly visible from the sea and the air, in white on a black background or black on a white background;

(c)for vessels not over 17 metres in length, the height of the port letters and [F2port] number shall be at least 25 centimetres with a line thickness of at least 4 centimetres;

(d)for vessels over 17 metres in length, the height of the [F3port letters and port number] shall be at least 45 centimetres with a line thickness of at least 6 centimetres;

(e)the port letters and [F4port number] shall in addition be painted or displayed on the wheel house top or some other prominent horizontal surface;

(f)the vessel’s official number shall be carved into the main beam of the vessel or, if that is not possible, marked or fixed thereon in the manner prescribed in paragraph 4(a) above.

6.  A scale of decimetres, or metres and decimetres, denoting a draught of water shall be marked on a ship, other than an exempted ship, on each side of its stem and its stern post, as follows:—U.K.

(a)in figures in two-decimetre intervals, if the scale is in decimetres; and

(b)in figures at each metre interval and at intervening two-decimetre intervals, if the scale is in metres and decimetres;

the capital letter ‘M’ being placed after each metre figure; the top figure of the scale showing both the metre and (except where it marks a full metre interval) the decimetre figure; the lower line of the figures, or figures and letters (as the case may be), coinciding with the draught line denoted thereby; the figures and letters being not less than one decimetre in length and being marked by being cut in and painted white or yellow on a dark ground, or in such other way as the Secretary of State approves.

Commencement Information

I6Sch. 3 para. 6 in force at 21.3.1994, see reg. 1(1)

7.  The name of a ship shall be marked in Roman letters and any numerals shall be in Roman or [F5Arabic] numerals.U.K.

Textual Amendments

Commencement Information

I7Sch. 3 para. 7 in force at 21.3.1994, see reg. 1(1)

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.