Rear position lamps
14.—(1) In paragraph 5 of Part I of Schedule 10—
(a)after the word “Markings” there shall be added the words “(see also regulation 3(6))”
(b)in sub-paragraph (a), for “paragraph (b), (c) or (d)” there shall be substituted “paragraph (b), (c), (d) or (e)”;
(c)in sub-paragraph (d), in the entry in the left hand column, after the words “by hand” there shall be added the words “in each case manufactured before 1st October 1995”; and
(d)after sub-paragraph (d) as so amended there shall be added the following sub-paragraph—
(e)A pedal cycle, a trailer drawn by a pedal cycle, an invalid carriage having a maximum speed not exceeding 4 mph, a horse-drawn vehicle and a vehicle drawn or propelled by hand in each case manufactured on or after 1st October 1995. | An approval mark or the British Standard mark which is specified in sub-paragraph (c) of the definition of “British Standard mark”. |
(2) In paragraph 13 of Part I of Schedule 10, in the definition of “British Standard mark” after paragraph (b) there shall be added—
“or
(c)the mark indicated in the specification for photometric and physical requirements for lighting equipment published by the British Standards Institution under the reference BS 6102: Part 3: 1986 as amended by AMD 5821 published on the 29th April 1988, namely “6102/3”.”