- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Measuring Equipment (Liquid Fuel and Lubricants) Regulations 1995, Section 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1.—(1) These Regulations may be cited as the Measuring Equipment (Liquid Fuel and Lubricants) Regulations 1995 and shall come into force on 4th May 1995.
(2) In these Regulations—
“the Act” means the Weights and Measures Act 1985;
“certificate of approval” means a certificate of approval of a pattern of measuring equipment granted or renewed by the Secretary of State under section 12 of the Act;
“digital” means capable of assigning only certain discrete values or positions within a continuous range by a series of discontinuous steps;
“liquid fuel” includes liquid fuel, lubricants and any mixture of liquid fuel and lubricants;
[F1“maximum delivery” means the largest quantity of liquid fuel which the measuring equipment is designed to measure;]
“measuring equipment” means any measuring equipment, other than a capacity measure, including a measuring device, ancillary equipment associated with it and any other equipment physically or otherwise connected to it whether or not such equipment has been connected to ensure correct measurement or is intended to facilitate operation of the measuring device and ancillary equipment;
“minimum delivery” means the smallest quantity of liquid fuel which the measuring equipment is designed to measure;
“notice of examination” means a notice of examination giving particulars of a pattern caused to be published by the Secretary of State;
“pattern” has the meaning set out in regulation 4(1) below;
“prescribed limits of error” has the meaning set out in regulation 17 below;
“the stamp” means the prescribed stamp(1); and
“test liquid” shall be construed in accordance with regulation 10.
(3) The abbreviations of units of measurement used in these Regulations refer to the relevant units as follows—
litre | L |
millilitre | mL |
millimetre | mm |
millipascal second | mPa.s. |
(4) The Measuring Equipment (Liquid Fuel and Lubricants) Regulations 1988(2) are hereby revoked.
Textual Amendments
F1Words in reg. 1(2) inserted (12.10.1998) by The Measuring Equipment (Liquid Fuel and Lubricants) (Amendment) Regulations 1998 (S.I. 1998/2218), regs. 1, 3(1)
Commencement Information
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.