The Dairy Products (Hygiene) (Scotland) Regulations 1995

PART II HEALTH MARK

1.  Dairy products shall carry a health mark in an easily visible place. It shall be legible, indelible and its characters easily distinguishable.

2.  Marking shall be carried out during or immediately after manufacture in the dairy establishment. The health mark may be applied to the dairy product, or to the wrapping or to a label affixed to the wrapping. Where small dairy products are individually wrapped and packaged together or where such small individually wrapped portions are supplied to the ultimate consumer, it shall be sufficient for the health mark to be applied to their collective packaging.

3.  Where a dairy product marked in accordance with paragraphs 1 and 2 above is subsequently placed in packaging, the health mark shall also be applied to the packaging.

4.  Subject to paragraph 5 below, the health mark shall consist of an oval surround containing in legible form and in printed capital letters the following information:—

Either—

(a) (i) in the upper part, the letters “UK”, followed by the approval number of the dairy establishment, and

(ii) in the lower part, the letters “EEC”; or

(b) (i) in the upper part, the words “UNITED KINGDOM”,

(ii) in the centre, the approval number of the establishment, and

(iii) in the lower part, the letters “EEC”; or

(c) (i) in the upper part, the letters “UK”;

(ii) in the centre, a reference to where the approval number of the establishment is shown, and

(iii) in the lower part, the letters “EEC”.

5.  In the case of bottles, packaging and receptacles referred to in regulation 27 of the Food Labelling (Scotland) Regulations 1984, the health mark may indicate only the letters “UK” and the approval number of the establishment.

6.  The health mark may be applied to the product, wrapping or packaging by an ink stamp or by branding, or it may be printed on or applied to a label.

7.  The health mark may also consist of an irremovable plate of resistant material complying with hygiene requirements and bearing the information specified in paragraph 4 above.