PART IIAPPROVAL AND CERTIFICATION OF NON-AUTOMATIC WEIGHING INSTRUMENTS
Examination and Supervision
EC verification11
1
All necessary measures shall be taken to secure that the manufacturing process for instruments intended for EC verification shall ensure conformity with the approved type, where appropriate, and with the requirements of the Directive which apply to them.
2
The manufacxturer or his authorised representative shall—
a
affic the CE marking and the sticker to each instrument (by way of confirmation that the instruments may be used for a Schedule 3 application) in accordance with regulation 18; and
b
draw up a written declaration of conformity that the instrument conforms with the requirements of the Directive which apply to it.
3
Subject to paragraphs (6) and (7) below, an application for the carrying out of the appropriate examinations and tests with a view to EC verification shall be made to an approved body by the manufacturer or his authorised representative; and each application shall, if the approved body so requests, be accompanied—
a
in the case of instruments manufactured in conformity with an approved type, by a copy of the EC type-approval certificate in respect of that approved type; or
b
in the xase of an instrument which does not use electronic devices and of which the load measuring device does not use one or more springs to balance the load, by the design documentation relating to those instruments.
4
Where the approved body is satisfied, on application made to it under paragraph (3) above and after carrying out, or having had carried out, the appropriate examinations and tests, that the instruments (if properly installed and used for the purposes for which they are intended)—
a
where appropriate, have been manufactured in conformity with the approved type; and
b
satisfy the provisions of the Directive which apply to them,
the approved body shall affix or cause to be affixed to each instrument the identification number of the approved body in accordance with regulation 18, and shall provide to the manufacturer or his authorised representative a written certificate of conformity relating to the tests carried out; and the manufacturer or his authorised representative shall ensure that he is able to provide the certificate to any person entitled to see it.
5
Where the approved body is not satisfied, it shall decline to affix its identification number to the instrument and to provide to the manufacturer or his authorised representative a written certificate of conformity under paragraph (4) above; and it shall in writing inform the applicant of its decision and of the grounds for its decision.
6
In the case of an instrument—
a
to which the CE marking, identification number and sticker have been affixed; and
b
to which a disqualification sticker has been affixed under regulation 24, 25 or 27 or under any corresponding provision in the law of a member State other than the United Kingdom,
the foregoing provisions of this regulation shall have effect as modified under paragraph (7) below.
7
In a case to which paragraph (6) above applies an application under paragraph (3) above may be made by any person established in the Community and—
a
in paragraph (3) above, the words after the first semi-colon shall not have effect; and
b
in paragraph (4) above, for the words “approved body shall affix” to the end there shall be substituted the words “the approved body shall affix or cause to be affixed to each instrument the identification number of the approved body and the re-qualification sticker in accordance with regulation 18.”.