- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
14.—(1) Subject to paragraph (2) below,
(a)equipment, a protective system or device—
(i)which is accompanied by an EC declaration of conformity—
(aa)issued in respect of it by the manufacturer or his authorized representative established in the Community; and
(bb)containing the elements set out in Schedule 13 hereto; and
(ii)to which the CE marking is affixed in accordance with regulation 6(2)(c) above; or
(b)a component which is accompanied by a certificate, which has been issued in accordance with regulation 8(2)(b) above,
shall be taken to comply with all the provisions of the ATEX Directive including the appropriate conformity assessment procedure specified in regulation 10 above, unless there are reasonable grounds for suspecting that it does not so comply.
(2) Paragraph (1) above does not apply—
(a)in relation to the enforcement authority where the responsible person fails or refuses to make available to the enforcement authority the documentation which he is required, by the conformity assessment procedure which applies to that equipment, protective system, device or component, to retain or a copy thereof; or
(b)in the case of equipment, a protective system or device
(i)which is supplied in the circumstances described in regulation 7(2)(b) above; and
(ii)to which the CE marking is indelibly affixed.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: