- Latest available (Revised)
- Point in Time (22/04/2011)
- Original (As made)
Version Superseded: 01/04/2014
Point in time view as at 22/04/2011. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 1996, Section 2.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
2.—(1) In these Regulations—
(a)the “ATEX Directive” means Directive 94/9/EC of the European Parliament and the Council on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres(1); and
(b)except for the references to the [F1European Union] in the definition of “the Commission” and in relation to the Official Journal, a reference to the [F1European Union] includes a reference to the EEA, and a reference to a member State includes a reference to an EEA State: for the purposes of this sub-paragraph—
(i)the “EEA” means the European Economic Area;
(ii)an “EEA State” means a State which is a Contracting Party to the EEA Agreement(2); and
(iii)the “EEA Agreement” means the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 as adjusted by the Protocol signed at Brussels on 17th March 1993.(3)
(2) In these Regulations, unless the context otherwise requires—
“CE marking” or “CE conformity marking” is a reference to a marking consisting of the initials “CE” in the form shown in Schedule 2 hereto;
“the Commission” means the Commission of the [F1European Union];
“component” has the meaning given by regulation 3(2)(d) below;
“devices” and “devices referred to in Article 1(2)” have the meaning given by regulation 3(2)(c) below;
“enforcement authority” means the Health and Safety Executive established under section 10 of the Health and Safety at Work etc. Act 1974(4);
“essential health and safety requirements” means the requirements in Annex II of the ATEX Directive which is set out in Schedule 3 hereto;
“equipment” has the meaning given by regulation 3(2)(a) below;
“equipment-category” and “category” in relation to an equipment-group shall be construed by reference to the criteria set out in Annex I of the ATEX Directive which is set out in Schedule 4 hereto;
“equipment group I” means equipment intended for use in underground parts of mines, and to those parts of surface installations of such mines, liable to be endangered by firedamp and/or combustible dust;
“equipment group II” means equipment intended for use in places, other than those which are specified for equipment group I, liable to be endangered by explosive atmospheres;
“explosive atmosphere” and “potentially explosive atmosphere” shall be construed respectively in accordance with regulation 3(2)(f) and (g) below;
“harmonized standard” means a technical specification adopted by the European Committee for Standardisation or the European Committee for Electrotechnical Standardisation or both, upon a mandate from the Commission in accordance with [F2Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations], and of which the reference number is published in the Official Journal of the [F1European Union];
“intended use” shall be construed in accordance with regulation 3(2)(e) below;
“notified body” shall be construed in accordance with regulation 11 below;
“protective systems” has the meaning given by regulation 3(2)(b) below;
“relevant essential health and safety requirements” in relation to equipment, a protective system or device means those provisions of the essential health and safety requirements which are applicable to that particular equipment, protective system or device, account being taken of its intended use;
“responsible person” means, in relation to equipment, a protective system, device or component,
the manufacturer of that equipment, protective system, device or component;
the manufacturer’s authorized representative established in the [F1European Union]; or
“safe” in relation to equipment, a protective system or a device means that, when properly installed and maintained and used for its intended purpose, it does not endanger the health and safety of persons and, where appropriate, domestic animals or property and cognate expressions shall be construed accordingly;
“standard” or “standard referred to in Article 5” means a technical specification approved by a recognised standardising body for repeated or continuous application, with which compliance is not compulsory: and, for the avoidance of doubt, this definition includes a harmonized standard or a transposed harmonized standard;
“supply” includes offering to supply, agreeing to supply, exposing for supply and possessing for supply and cognate expressions shall be construed accordingly; and
“transposed harmonized standard” means a national standard of a member State which transposes a harmonized standard.
[F5(3) For the purposes of these Regulations, equipment, protective systems or devices shall not be regarded as having been put into service where a person—
(a)being a manufacturer of equipment, protective systems or devices for his own use; or
(b)having imported equipment, protective systems or devices from a country or territory outside the [F1European Union] for his own use,
puts that equipment, protective system or device into service otherwise than in the course of a business.]
Textual Amendments
F1Words in Regulations substituted (22.4.2011) by The Treaty of Lisbon (Changes in Terminology) Order 2011 (S.I. 2011/1043), arts. 2, 3-6
F2Words in reg. 2(2) substituted (1.5.2005) by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (Amendment) Regulations 2005 (S.I. 2005/830), regs. 1, 2(a)
F3Words in reg. 2(2) inserted (21.12.2001) by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (Amendment) Regulations 2001 (S.I. 2001/3766), regs. 1, 3(2)(a)(i)
F4Words in reg. 2(2) inserted (21.12.2001) by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (Amendment) Regulations 2001 (S.I. 2001/3766), regs. 1, 3(2)(a)(ii)
F5Reg. 2(3) inserted (21.12.2001) by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (Amendment) Regulations 2001 (S.I. 2001/3766), regs. 1, 3(2)(b)
Commencement Information
OJ No. L100, 19.4.94, p. 1.
The EEA Agreement came into force in relation to Liechtenstein on 1st May 1995 (OJ No. L86, 20.4.95, p. 58).
The application of the ATEX Directive was extended to the EEA from 1st December 1994 by virtue of Decision 14/94 of the EEA Joint Committee (OJ No. L325, 17.12.94, p. 65) which inserted a reference to that Directive at point 7A in Chapter X of Annex II to the EEA Agreement.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.