- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
7.—(1) Subject to sub-paragraph (2) below—
(a)every employer shall ensure that no person employed by him modifies at work the body of a transportable pressure receptacle—
(i)of seamless construction, or
(ii)which has contained acetylene;
(b)every employer shall ensure that no person employed by him modifies at work the body of any other type of transportable pressure receptacle if that modification would put the transportable pressure receptacle outside the scope of the design standard or design specification to which it was originally constructed; and
(c)no person shall supply any modified transportable pressure receptacle for use unless following such modification a person approved under paragraph 3(4)(a) has marked or certified the receptacle as being fit for use or, in the case of an EEC-type cylinder, an inspection body referred to in regulation 13(b)(i) has so marked or certified it.
(2) Sub-paragraph (1) shall not apply any modification constituting the remaking of a thread if such modificati9on is carried out to accordance with a standard approved by the Executive.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: