- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
Regulation 12
1. The areas marked A B and C in the diagram indicate areas of the surface on each face of the pyramid as follows:
A—Surface coloured red which may be reflectorised.
B—White surface which must be reflectorised.
C—Surface coloured red which may be reflectorised. Up to 50% of this surface may be obscured by constructional components.
2. The pyramid shall not be directly illuminated either internally or externally.
3. The base may be of any colour or it may be omitted.
1. The areas marked A and B in the diagram indicate areas of the surface on each face of the pyramid as follows:
A—Surface coloured red which may be reflectorised.
B—White surface which must be reflectorised.
2. Each outer edge of the triangular face shall be the same length.
3. The pyramid shall not be directly illuminated either internally or externally.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: