PART IIGENERAL
InspectionI16
1
Every employer shall ensure that, where the safety of work equipment depends on the installation conditions, it is inspected—
a
after installation and before being put into service for the first time; or
b
after assembly at a new site or in a new location,
to ensure that it has been installed correctly and is safe to operate.
2
Every employer shall ensure that work equipment exposed to conditions causing deterioration which is liable to result in dangerous situations is inspected—
a
at suitable intervals; and
b
each time that exceptional circumstances which are liable to jeopardise the safety of the work equipment have occurred,
to ensure that health and safety conditions are maintained and that any deterioration can be detected and remedied in good time.
3
Every employer shall ensure that the result of an inspection made under this regulation is recorded and kept until the next inspection under this regulation is recorded.
4
Every employer shall ensure that no work equipment—
a
leaves his undertaking; or
b
if obtained from the undertaking of another person, is used in his undertaking,
unless it is accompanied by physical evidence that the last inspection required to be carried out under this regulation has been carried out.
5
This regulation does not apply to—
a
a power press to which regulations 32 to 35 apply;
b
a guard or protection device for the tools of such power press;
c
work equipment for lifting loads including persons;
d
winding apparatus to which the Mines (Shafts and Winding) Regulations 19936 apply;
e
work equipment required to be inspected by regulation 29 of the Construction (Health, Safety and Welfare) Regulations 19967;
F1f
work equipment to which regulation 12 of the Work at Height Regulations 2005 applies.