The Medical Devices Regulations 2002

[F114.  In Annex III—E+W+S

(a)for each reference to “EC type-examination” (including in the title), substitute “type-examination”;

(b)in Section 1—

(i)for “a notified body” substitute “an approved body”;

(ii)for “this Directive” substitute “the Regulations”;

(c)in Section 2—

(i)in the first indent,—

(aa)for “authorized representative” substitute “UK responsible person” ;

(bb)for “the representative” substitute “the UK responsible person”;

(ii)in the second indent, for the second and third sentences substitute—

“The applicant must provide samples at the request of the approved body.”;

(iii)in the third indent, for “notified” substitute “approved”;

(d)in Section 3—

(i)for each reference to “Article 5” substitute “regulation 3A of these Regulations”;

(ii)for “Directive 2003/32/EC” substitute “Commission Regulation 722/2012”;

(e)for Sections 4 and 5 substitute—

“4.  The approved body must—

4.1.  examine and assess the documentation, verify that the type has been manufactured in accordance with that documentation; it must also record the items which have been designed in accordance with the applicable provisions of the standards referred to in regulation 3A of the Regulations, as well as the items for which the design is not based on the relevant provisions of the said standards;

4.2.  carry out or arrange for the appropriate inspections and the tests necessary to verify whether the solutions adopted by the manufacturer satisfy the essential requirements of the Regulations where the standards referred to in regulation 3A of the Regulations have not been applied; if the device is to be connected to another device or other devices in order to operate as intended, proof must be provided that it conforms to the essential requirements when connected to any such device having the characteristics specified by the manufacturer;

4.3.  carry out or arrange for the appropriate inspections and the tests necessary to verify whether, where the manufacturer has chosen to apply the relevant standards, these have actually been applied;

4.4.  agree with the applicant on the place where the necessary inspections and tests will be carried out.

5.  Where the type meets the provisions of the Regulations, the approved body must issue a type-examination certificate to the applicant. The certificate must contain the name and address of the manufacturer, the conclusions of the inspection, the conditions under which the certificate is valid and the information necessary for identification of the type approved. The relevant parts of the documentation must be annexed to the certificate and a copy kept by the approved body.

In the case of devices referred to in Annex I, Section 7.4, second paragraph, the approved body must, as regards the aspects referred to in that Section, consult the Secretary of State before taking the decision. The opinion of the Secretary of State must be drawn up within 210 days after receipt of valid documentation. The scientific opinion of the Secretary of State must be included in the documentation concerning the device. The approved body must give due consideration to the views expressed in this consultation when making its decision. It must convey its final decision to the Secretary of State.

In the case of devices referred to in Annex I, Section 7.4, third paragraph, the scientific opinion of the Secretary of State must be included in the documentation concerning the device. The opinion of the Secretary of State must be drawn up within 210 days after receipt of valid documentation. The approved body will give due consideration to the opinion of the Secretary of State when making its decision. The approved body may not deliver the certificate if the Secretary of State’s decision is unfavorable. It must convey its final decision to the Secretary of State.

In the case of devices manufactured utilizing tissues of animal origin referred to in Commission Regulation 722/2012, the approved body must follow the procedures referred to in that Regulation.”;

(f)in Section 6—

(i)for each reference to “notified body” substitute “approved body”;

(ii)omit each reference to “EC”;

(g)for Section 7.2 substitute—

“7.2.  An approved body must cooperate with other approved bodies with regard to making available copies of the type-examination certificates or addenda to those certificates but, as regards copies of annexes to the certificates, must only make those available to other approved bodies with the consent of the manufacturer.”.

(h)in Section 7.3 —

(i)for “authorised representative” substitute “UK responsible person”;

(ii)omit “EC”.]

Textual Amendments