The Associated British Ports (Immingham Outer Harbour) Harbour Revision Order 2004

Interpretation

2.—(1) Subject to the provisions of article 3(2) below, the words and expressions assigned meanings by Acts wholly or partly incorporated with this Order shall have those meanings in this Order, and

“the 1847 Act” means the Harbours, Docks and Piers Clauses Act 1847(1);

“the 1904 Act” means the Humber Commercial Railway and Dock Act 1904(2);

“the 1983 Act” means the Associated British Ports Act 1983(3);

“the 1990 Act” means the Associated British Ports Act 1990(4);

“A.B. Ports” means Associated British Ports;

“Chart Datum” in relation to any dredging is 3.9 metres below Ordnance Datum (Newlyn);

“the deposited maps” means the maps consisting of a location plan, a plan of the works numbered sheet 1, a key plan numbered sheet 2 and sections numbered sheets 3, 4 and 5, prepared in duplicate, signed by the Head of Ports Division in the Department for Transport and marked “Maps referred to in the Associated British Ports (Immingham Outer Harbour) Harbour Revision Order 2004” one copy of which is deposited at the Department and the other at the principal office of A.B. Ports;

“the Dock Master” means the dock master of A.B. Ports at Immingham and Grimsby;

“the Western Jetty” means the Western Jetty in the river Humber authorised by the 1904 Act as “jetty (No. 1)”;

“the limits of deviation” means the limits of deviation shown on sheet 1 of the deposited maps;

“the proposed outer harbour” means the area within the limits of deviation including the works;

“tidal work” means so much of any of the works as is on, under or over tidal waters or tidal lands below the level of high water;

“the undertaking” means the undertaking of A.B. Ports as authorised from time to time;

“vessel” has the meaning assigned to it in section 3 (Interpretation) of the 1983 Act;

“the works” means the works authorised by this Order.

(2) Unless the context otherwise requires, any reference in this Order to a work identified by the number of such work shall be construed as a reference to the work of that number authorised by this Order.

(3) All directions, distances, points and dimensions stated in any descriptions of works shall be construed as if the words “or thereabouts” were inserted after each such direction, distance, point or dimension.

(1)

1847 c. 27 (10 & 11 Vict.).

(2)

1904 c. lxxxv (4 Edw. 7).

(3)

1983 c. viii.

(4)

1990 c. xxi.