The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2004 (revoked)
PART 1INTRODUCTORY PROVISIONS
1Citation and commencement
2Interpretation
3Application
4Application to international carriage
5Application to tanks, pressure receptacles, battery-vehicles, battery-wagons, MEGCs, UN MEGCs and transportable pressure equipment
6Application to armed forces
7Exemptions
8Competent authority
PART 2REQUIREMENTS OF ADR AND RID
9Training
10Safety obligations
10ASecurity provisions
11Class 7 goods for carriage by rail
12Safety advisers
13Reports on accidents or incidents
14Emergency plans for marshalling yards
15Classification of goods
16Prohibition from carriage
17Dangerous goods list and special provisions
18Use of packagings
19Use of tanks, battery-vehicles, battery-wagons, MEGCs and UN MEGCs
20Consignment
21Construction and testing of packagings and packages
22Construction and testing of tanks, battery-vehicles, battery-wagons, MEGCs, UN MEGCs and bulk containers
23Carriage, loading, unloading and handling
24Vehicle crews, equipment, operation and documentation
25Construction and approval of vehicles
PART 3COMPETENT AUTHORITY FUNCTIONS
26Interpretation of Part 3 and Schedule 3
27Grant of approvals by the GB competent authority
28Grant of unilateral and multilateral approvals by the GB competent authority in relation to class 7 goods for carriage by rail
29Appointment of persons by the GB competent authority
30Recognition of approvals, tests, methods, standards and procedures etc. by the GB competent authority
31Imposing of requirements by the GB competent authority
32Issuing of safety adviser vocational training certificates by the GB competent authority
33Issuing of driver training certificates by the GB competent authority
34Notification under sub-section 1.8.2.2 of ADR or of RID
35Miscellaneous functions of the GB competent authority
36Exemption certificates, temporary and ad hoc exemptions
PART 4TRANSPORTABLE PRESSURE EQUIPMENT
37Interpretation of Part 4
38Placing on the market and use at work of transportable pressure equipment
39Transportable pressure equipment placed on the market and used at work exclusively in Great Britain
40Reassessment of conformity
41Periodic inspection and repeated use
42Notified bodies
43Approved bodies
44Appointment of notified bodies and approved bodies by the competent authority
45Conformity marking
PART 5ADDITIONAL REQUIREMENTS TO ADR AND RID
46Attendant for carriage of class 1 goods by road
47Duration of carriage and delivery of class 1 goods by road
48Miscellaneous security requirements for carriage of class 1 goods by road
49Miscellaneous security requirements for carriage of class 1 goods by rail
50Security requirement for carriage of class 1 goods by road or rail and class 7 goods by rail
51Carriage of class 1 goods in vehicles used to carry passengers for hire or reward
52Carriage of class 1 goods by road in motor vehicles
53Marshalling and formation of trains
54Keeping of information by carriers
55Placards, marks and plate markings for carriage within Great Britain
PART 6MISCELLANEOUS
56Fees
56AFees for certificates and applications for the issuing of driver training certificates and safety adviser vocational training certificates
57Transitional defence
58Defence and enforcement
59Amendments to the Health and Safety (Fees) Regulations 2004
60Amendments to Chemicals (Hazard Information and Packaging for Supply) Regulations 2002
61Amendments to the Classification and Labelling of Explosives Regulations 1983
62Consequential amendments
63Revocations and savings
SCHEDULE 1OLD TANKS
1Interpretation
2Construction of tanks of old tank-vehicles, tank containers and old tank wagons for carriage by road or rail
3Testing, examination and maintenance for carriage by road or rail
4Testing, examination and maintenance for carriage by road
5Testing, examination and maintenance for carriage by rail
6Use of old tank-vehicles, old tank wagons or tank-containers for carriage by road or rail
7Keeping of documents
8Appointment of inspection bodies by the competent authority
9Exceptions
SCHEDULE 2OLD PRESSURE RECEPTACLES
1Interpretation
2Duties on those designing, manufacturing, importing, supplying, modifying or repairing old pressure receptacles
3Conformity to approved design standard or specification
4Examination of old pressure receptacles by competent or approved persons
5Filling of old pressure receptacles
6Approved design specification
7Modification, repair and re-rating of old pressure receptacles
8Additional requirements for old pressure receptacles containing certain dangerous goods not classified as class 2
9Approvals by the competent authority
10Exceptions
SCHEDULE 3COMPETENT AUTHORITY FUNCTIONS
PART 1APPROVALS BY THE GB COMPETENT AUTHORITY
1The references referred to in regulation 27(b) are—
2Any approval granted by the GB competent authority by reference...
PART 2MULTILATERAL AND UNILATERAL APPROVALS BY THE GB COMPETENT AUTHORITY
3The references referred to in regulation 28(1) are for–
4The references referred to in regulation 28(3) in relation to...
5(1) Where the GB competent authority grants approvals under regulation...
PART 3APPOINTMENT OF PERSONS BY THE GB COMPETENT AUTHORITY
6The references referred to in regulation 29(1)(b) are sub-sections 6.2.1.4.1...
PART 4RECOGNITION OF APPROVALS, TESTS, METHODS, STANDARDS, PROCEDURES ETC. BY THE GB COMPETENT AUTHORITY
7The references referred to in regulation 30(1)(b) are—
8(1) Where the GB competent authority recognises a quality assurance...
PART 5IMPOSING OF REQUIREMENTS BY THE GB COMPETENT AUTHORITY
9The references referred to in regulation 31(1)(b) are—
10(1) Where the GB competent authority imposes requirements by reference...
SCHEDULE 4CONFORMITY ASSESSMENT PROCEDURES
...
Module A—internal production control
The manufacturer must draw up the technical documentation described in...
The technical documentation must enable an assessment to be made...
The manufacturer, or his authorised representative established within the Community,...
The manufacturer must take all measures necessary to ensure that...
. . . . . . . . . ....
. . . . . . . . . ....
. . . . . . . . . ....
. . . . . . . . . ....
. . . . . . . . . ....
. . . . . . . . . ....
Module B—EC type-examination
The application of EC type-examination must be lodged by the...
The technical documentation must enable an assessment to be made...
The notified body must:
.1examine the technical documentation, verify that the type has been...
.2perform or have performed the appropriate examinations and necessary tests...
.3perform or have performed the appropriate examinations and necessary tests...
.4agree with the applicant the location where the examinations and...
Where the type satisfies the relevant provisions of Part 4...
The applicant must inform the notified body that holds the...
Each notified body must communicate to the member States, the...
The other notified bodies may receive copies of the EC...
The manufacturer, or his authorised representative established within the Community,...
Module B1—EC design examination
The manufacturer, or his authorised representative established within the Community,...
The technical documentation must enable an assessment to be made...
The notified body must:
.1examine the technical documentation and identify components which have been...
.2perform the necessary examinations to establish whether the solutions adopted...
.3perform the necessary examinations to establish whether the relevant provisions...
Where the design meets the relevant provisions of Part 4...
The applicant must inform the notified body that holds the...
Each notified body must communicate to the member States the...
The other notified bodies may on request obtain the relevant...
The manufacturer, or his authorised representative established within the Community,...
Module C1—conformity to type
The manufacturer must take all measures necessary to ensure that...
The manufacturer, or his authorised representative established within the Community,...
Final assessment must be subject to monitoring in the form...
During such visits, the notified body must: — ensure that...
Module D—production quality assurance
The manufacturer must operate an approved quality system for production,...
Quality system
.1The manufacturer must lodge an application for assessment of his...
2 The quality system must ensure compliance of the transportable...
.3The notified body must assess the quality system to determine...
.4The manufacturer must undertake to fulfil the obligations arising out...
Surveillance under the responsibility of the notified body
.1The purpose of the surveillance is to make sure that...
.2The manufacturer must allow the notified body access for inspection...
.3The notified body must carry out periodic audits to make...
.4In addition, the notified body may pay unexpected visits to...
The manufacturer must, for a period of 10 years after...
Each notified body must communicate to the member States the...
Module D1—production quality assurance
The manufacturer must draw up the technical documentation described below....
The manufacturer must operate an approved quality system for production,...
Quality system
.1The manufacturer must lodge an application for assessment of his...
.2The quality system must ensure compliance of the transportable pressure...
.3The notified body must assess the quality system to determine...
.4The manufacturer must undertake to fulfil the obligations arising out...
Surveillance under the responsibility of the notified body
.1The purpose of surveillance is to make sure that the...
.2The manufacturer must allow the notified body access for inspection...
.3The notified body must carry out periodic audits to make...
.4In addition, the notified body may pay unexpected visits to...
The manufacturer must, for a period of 10 years after...
Each notified body must communicate to the member States the...
Module E—product quality assurance
The manufacturer must operate an approved quality system for production,...
Quality system
.1The manufacturer must lodge an application for assessment of his...
.2Under the quality system, each item of transportable pressure equipment...
.3The notified body must assess the quality system to determine...
.4The manufacturer must undertake to fulfil the obligations arising out...
Surveillance under the responsibility of the notified body
.1The purpose of surveillance is to make sure that the...
.2The manufacturer must allow the notified body access for inspection...
.3The notified body must carry out periodic audits to make...
.4In addition, the notified body may pay unexpected visits to...
The manufacturer must, for a period of 10 years after...
Each notified body must communicate to the member States the...
Module E1—production quality assurance
The manufacturer must draw up the technical documentation described below....
The manufacturer must operate an approved quality system for the...
Quality system
.1The manufacturer must lodge an application for assessment of his...
.2Under the quality system, each item of transportable pressure equipment...
.3The notified body must assess the quality system to determine...
.4The manufacturer must undertake to discharge the obligations arising from...
Surveillance under the responsibility of the notified body
.1The purpose of surveillance is to make sure that the...
.2The manufacturer must allow the notified body access for inspection...
.3The notified body must carry out periodic audits to make...
.4In addition, the notified body may pay unexpected visits to...
The manufacturer must, for a period of 10 years after...
Each notified body must communicate to the member States the...
Module F—product verification
The manufacturer must take all measures necessary to ensure that...
The notified body must perform the appropriate examinations and tests...
Verification by examination and testing of each item of transportable...
.1Each item of transportable pressure equipment must be individually examined...
.2The notified body must affix its identification number or have...
.3The manufacturer, or his authorised representative established within the Community,...
Module G—EC unit verification
The manufacturer must apply to a notified body of his...
The technical documentation must enable the conformity of the transportable...
The notified body must examine the design and construction of...
.1The notified body must affix its identification number or have...
.2The manufacturer, or his authorised representative established within the Community,...
Module H—full quality assurance
The manufacturer must implement an approved quality system for design,...
Quality system
.1The manufacturer must lodge an application for assessment of his...
.2The quality system must ensure compliance of the transportable pressure...
.3The notified body must assess the quality system to determine...
.4The manufacturer must undertake to fulfil the obligations arising out...
Surveillance under the responsibility of the notified body
.1The purpose of this surveillance is to make sure that...
.2The manufacturer must allow the notified body access for inspection...
.3The notified body must carry out periodic audits to make...
.4In addition, the notified body may pay unexpected visits to...
The manufacturer must, for a period of 10 years after...
Each notified body must communicate to the other member States...
Module H1—full quality assurance with design examination and special surveillance of the final test
Final assessment is subject to increased surveillance in the form...
SCHEDULE 5MODULES TO BE FOLLOWED FOR CONFORMITY ASSESSMENT
...
. . . . . . . . . ....
Transportable pressure equipment must be subject, at the choice of...
As part of the quality assurance procedures, the notified body...
SCHEDULE 6CONFORMITY REASSESSMENT PROCEDURE
...
This procedure describes the method for ensuring that transportable pressure...
The owner must make available to a notified body information...
The notified body must check whether transportable pressure equipment which...
If the results of the above checks are satisfactory, the...
For equipment manufactured in series, including their valves and other...
SCHEDULE 7PERIODIC INSPECTION PROCEDURES
...
Module 1—periodic inspection of products
To meet the requirements referred to in paragraph 1 the...
The notified body or approved body must perform the appropriate...
.1All transportable pressure equipment must be examined individually and appropriate...
.2The notified body or approved body must affix, or have...
.3The owner or his authorised representative established in the Community...
Module 2—periodic inspection through quality assurance
The owner or his authorised representative established within the Community...
Quality system
.1The owner or his authorised representative established in the Community...
.2Under the quality system, each item of transportable pressure equipment...
.3The notified body must assess the quality system to determine...
.4The owner or his authorised representative established in the Community...
Surveillance under the responsibility of the notified body
.1The purpose of surveillance is to make sure that the...
.2The owner or his authorised representative established in the Community...
.3The notified body must carry out periodic audits to make...
.4In addition, the notified body may pay unannounced visits to...
The owner or his authorised representative established in the Community...
SCHEDULE 8CONFORMITY MARKING
. . . . . . . . . ....
. . . . . . . . . ....
. . . . . . . . . ....
. . . . . . . . . ....
. . . . . . . . . ....
SCHEDULE 9PLACARDS, MARKS AND PLATE MARKINGS FOR CARRIAGE WITHIN GREAT BRITAIN
PART 1CARRIAGE OF GOODS BY ROAD
1Where orange-coloured plates bearing a HIN are required to be...
2Subject to paragraphs 3 and 6, where a battery-vehicle, tank-vehicle...
3Subject to paragraphs 4 and 6, where more than one...
4Subject to paragraph 6, where more than one dangerous good...
5(1) Subject to sub-paragraph (2), where dangerous goods are being...
6(1) The information required to be displayed on placards and...
Hazard warning panel
. . . . . . . . . ....
PART 2CARRIAGE OF GOODS BY RAIL
7Where orange-coloured plates bearing a HIN are required to be...
8Where dangerous goods are being carried in tanks, a telephone...
9(1) The information required to be displayed on placards and...
SCHEDULE 10AMENDMENTS TO THE HEALTH AND SAFETY (FEES) REGULATIONS 2004
1The Health and Safety (Fees) Regulations 2004 shall be amended...
2For regulations 12 to 14 substitute— Fees for certificates and...
3For Schedule 10 substitute— SCHEDULE 10 FEE FOR DRIVER TRAINING...
4For Schedule 11 substitute— SCHEDULE 11 FEES FOR APPLICATIONS FOR...
5For Schedule 12 substitute— SCHEDULE 12 FEE FOR SAFETY ADVISER...
SCHEDULE 11AMENDMENTS TO THE CHEMICALS (HAZARD INFORMATION AND PACKAGING FOR SUPPLY) REGULATIONS 2002
1The Chemicals (Hazard Information and Packaging for Supply) Regulations 2002...
2After regulation 8 (labelling of dangerous substances and dangerous preparations)...
SCHEDULE 12AMENDMENTS TO THE CLASSIFICATION AND LABELLING OF EXPLOSIVES REGULATIONS 1983
1The Classification and Labelling of Explosives Regulations 1983 shall be...
2In regulation 2(1) (interpretation)— (1) omit the definition of “class...
3In regulation 3 (classification and labelling of explosive articles and...
4For regulation 6 (labelling of an article, substance or combination)...
5Regulations 7 (labelling of an article, substance or combination not...
6In regulation 10 (labelling generally), in paragraph (1), for “6,...
7In regulation 12A, in paragraph (a) for “3(2)(b), 6 or...
8Omit Schedules 1 and 2.
9In Schedule 3 (labels)— (1) omit paragraphs 1 to 11;...
SCHEDULE 13CONSEQUENTIAL AMENDMENTS
1Amendment to the Petroleum (Consolidation) Act 1928
2Amendment to the Compressed Acetylene (Importation) Regulations 1978
3Amendments to the Dangerous Substances in Harbour Areas Regulations 1987
4Amendment to the Dangerous Substances (Notification and Marking of Sites) Regulations 1990
5Amendment to the Control of Explosives Regulations 1991
6Amendment to the Coal and Other Safety-Lamp Mines (Explosives) Regulations 1993
7Amendment to the Notification of New Substances Regulations 1993
8Amendments to the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 1995
9Amendment to the Health and Safety (Safety Signs and Signals) Regulations 1996
10Amendments to the Pressure Systems Safety Regulations 2000
11Amendments to the Radiation (Emergency Peparedness and Public Information) Regulations 2001
12Amendments to the Control of Asbestos at Work Regulations 2002
13Amendment to the Contol of Lead at Work Regulations 2002
14Amendment to the Control of Substances Hazardous to Health Regulations 2002
15Amendment to the Dangerous Substances and Explosive Atmospheres Regulations 2002
SCHEDULE 14REVOCATIONS

2004 No. 568

HEALTH AND SAFETY

The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2004 (revoked)F1

Made

Laid before Parliament

Coming into force

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations:
Amendments (Textual)