- Latest available (Revised)
- Point in Time (22/04/2011)
- Original (As made)
Version Superseded: 31/12/2020
Point in time view as at 22/04/2011. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Community Design Regulations 2005, Section 1B.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1B.—(1) Where a person—
(a)has in his possession, custody or control for commercial purposes an infringing article, or
(b)has in his possession, custody or control anything specifically designed or adapted for making articles to a particular design which is a Community design, knowing or having reason to believe that it has been or is to be used to make an infringing article,
the holder of the Community design in question may apply to the Community design court for an order that the infringing article or other thing be delivered up to him or to such other person as the court may direct.
(2) An application shall not be made after the end of the period specified in the following provisions of this regulation; and no order shall be made unless the court also makes, or it appears to the court that there are grounds for making, an order under regulation 1C (order as to disposal of infringing articles, &c.).
(3) An application for an order under this regulation may not be made after the end of the period of six years from the date on which the article or thing in question was made, subject to paragraph (4).
(4) If during the whole or any part of that period the holder of the Community design—
(a)is under a disability, or
(b)is prevented by fraud or concealment from discovering the facts entitling him to apply for an order,
an application may be made at any time before the end of the period of six years from the date on which he ceased to be under a disability or, as the case may be, could with reasonable diligence have discovered those facts.
(5) In paragraph (4) “disability”—
(a)in England and Wales, has the same meaning as in the Limitation Act 1980;
(b)in Scotland, means legal disability within the meaning of the Prescription and Limitation (Scotland) Act 1973;
(c)in Northern Ireland, has the same meaning as in the Statute of Limitations (Northern Ireland) 1958.
(6) A person to whom an infringing article or other thing is delivered up in pursuance of an order under this regulation shall, if an order under regulation 1C is not made, retain it pending the making of an order, or the decision not to make an order, under that regulation.
(7) The reference in paragraph (1) to an act being done in relation to an article for “commercial purposes” are to its being done with a view to the article in question being sold or hired in the course of a business.
(8) Nothing in this regulation affects any other power of the court.]
Textual Amendments
F1Regs. 1A-1D inserted (29.4.2006) by The Intellectual Property (Enforcement, etc.) Regulations 2006 (S.I. 2006/1028), reg. 1, Sch. 3 para. 9
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: