- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Electromagnetic Compatibility Regulations 2005, Section 5.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
5.—(1) A reference to “protection requirements” in relation to relevant apparatus is a reference to the requirements set out in the following provisions of this regulation.
(2) Subject to paragraphs (3) to (5) below, relevant apparatus shall be so constructed that—
(a)the electromagnetic disturbance it generates does not exceed a level allowing other relevant apparatus to operate as intended; and
(b)it has a level of intrinsic immunity which is adequate to enable it to operate as intended,
when it is—
(i)properly installed and maintained; and
(ii)used for the purpose for which it was intended.
(3) Nothing in paragraph (2) above shall be taken to require relevant apparatus, not being apparatus specifically designed for use at a given location, to be constructed in such a manner as to—
(a)prevent the generation of electromagnetic disturbance to, or
(b)provide for intrinsic immunity to electromagnetic disturbance generated by,
other relevant apparatus which would not reasonably be expected to be present in its usual electromagnetic environment.
(4) Without prejudice to the generality of paragraph (2)(a), the electromagnetic disturbance generated by relevant apparatus shall—
(a)not exceed a level allowing radio and telecommunications equipment to operate as intended; and
(b)be such as not to hinder the use of apparatus of any of the descriptions listed in Schedule 3 hereto (being descriptions listed in the illustrative list of the principal protection requirements in Annex III of the EMC Directive) where that apparatus is constructed in such a way that it has an adequate level of immunity in its usual electromagnetic environment so as to allow its unhindered operation taking into account the levels of electromagnetic disturbance generated by relevant apparatus complying with applicable EMC standards.
(5) Without prejudice to the generality of paragraph (2)(b)—
(a)relevant apparatus shall be constructed in such a way that it has an adequate level of immunity in its usual electromagnetic environment so as to allow its unhindered operation taking into account the levels of electromagnetic disturbance generated by other relevant apparatus which might reasonably be expected to be present in that environment and which complies with the protection requirements; and
(b)whether the level of intrinsic immunity of relevant apparatus is adequate is to be considered having regard to all the circumstances of the case, and in particular to—
(i)the level of performance reasonably expected of that apparatus having regard to its function or intended function;
(ii)any specification for an acceptable level of degradation of performance provided to the end user by the manufacturer;
(iii)the consequences of degradation of performance,
but nothing in this sub-paragraph shall authorise a level of intrinsic immunity which could permit the operation of the apparatus to be dangerous (either to persons or property) in any reasonably foreseeable circumstances.
(6) The information required to enable use in accordance with the intended purpose of the relevant apparatus must be contained in the manufacturer's instructions accompanying the apparatus.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: