Search Legislation

The Measuring Instruments (Capacity Serving Measures) Regulations 2006 (revoked)

Changes to legislation:

There are currently no known outstanding effects for the The Measuring Instruments (Capacity Serving Measures) Regulations 2006 (revoked). Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

  1. Introductory Text

  2. PART I PRELIMINARY

    1. 1.Citation and commencement

    2. 2.Interpretation

    3. 3.Application

  3. PART II PLACING ON THE MARKET AND PUTTING INTO USE OF CAPACITY SERVING MEASURES

    1. 4.Requirements for placing on the market and putting into use

    2. 5.Compliance with the essential requirements

    3. 6.Conformity assessment procedures

    4. 7.Designation of United Kingdom notified bodies

    5. 8.Functions of notified bodies

    6. 9.Provisions supplemental to regulation 7

    7. 10.Variation and termination of designations

    8. 11.Fees

    9. 12.Marking and identification requirements

    10. 13.Conformity with other directives

  4. PART III USE FOR TRADE OF CAPACITY SERVING MEASURES

    1. 14.Requirements for use for trade

    2. 15.Manner of use

  5. PART IV ENFORCEMENT

    1. 16.Enforcement authority

    2. 17.Compliance notice procedure

    3. 18.Immediate enforcement action

    4. 19.Review by the Secretary of State

    5. 20.Disqualification

    6. 21.Re-qualification

    7. 22.Unauthorised application of authorised marks

    8. 23.Powers of entry and inspection

    9. 24.Obstruction of enforcement officer

    10. 25.Penalties for offences

    11. 26.Defence of due diligence

    12. 27.Liability of persons other than the principal offender

  6. PART V MISCELLANEOUS AND SUPPLEMENTAL

    1. 28.Service of documents

    2. 29.Savings for certain privileges

    3. 30.Adaptation for Northern Ireland

  7. Signature

    1. SCHEDULE 1

      ESSENTIAL REQUIREMENTS

      1. 1.The essential requirements are the relevant requirements relating to capacity...

      2. 2.Definitions

      3. 3.Allowable Errors

      4. 4.Reproducibility

      5. 5.Repeatability

      6. 6.Durability

      7. 7.Reliability

      8. 8.Suitability

      9. 9.Information to be borne by and to accompany the capacity serving measure

      10. 10.Conformity evaluation

      11. 11.Reference Conditions

      12. 12.MPE

      13. 13.Materials

      14. 14.Shape

      15. 15.Marking

    2. SCHEDULE 2

      NOTIFIED BODIES

      1. PART 1 NOTIFIED BODY CRITERIA FOR DESIGNATION

        1. 1.The body, its director and staff involved in conformity assessment...

        2. 2.The body, its director and staff involved in conformity assessment...

        3. 3.The conformity assessment shall be carried out with the highest...

        4. 4.The body shall be capable of carrying out all the...

        5. 5.The body's staff shall have— (a) sound technical and vocational...

        6. 6.The impartiality of the body, its director and staff shall...

        7. 7.The body shall satisfy the Secretary of State that it...

        8. 8.The body's director and staff shall be bound to observe...

      2. PART 2 FUNCTIONS

        1. 9.Assessment of applications for certificates or notification

        2. 10.Limitations on duties to exercise functions

        3. 11.Contractors

        4. 12.Form of certificates and notifications

        5. 13.Conditions in certificates or notifications

        6. 14.Withdrawal of certificates or notifications

        7. 15.Procedure where a notified body is minded to refuse to give, or to vary or withdraw a certificate or notification

    3. SCHEDULE 3

      CAPACITY SERVING MEASURES TO WHICH THESE REGULATIONS APPLY

    4. SCHEDULE 4

      TECHNICAL DOCUMENTATION

      1. 1.The technical documentation shall render the design, manufacture and operation...

      2. 2.The technical documentation shall be sufficiently detailed to ensure—

      3. 3.The technical documentation shall include insofar as relevant for assessment...

      4. 4.The manufacturer shall specify where markings have been applied.

      5. 5.The manufacturer shall indicate the conditions for compatibility with interfaces...

    5. SCHEDULE 5

      MARKING AND INSCRIPTIONS

      1. 1.The CE marking consists of the symbol “CE” according to...

      2. 2.The M marking consists of the capital letter “M” and...

      3. 3.The identification number of the notified body concerned shall follow...

      4. 4.When a capacity serving measure consists of a set of...

      5. 5.When a capacity serving measure is too small or too...

      6. 6.The CE marking and the M marking shall be indelible....

    6. SCHEDULE 6

      ADAPTATIONS FOR NORTHERN IRELAND

      1. 1.In regulation 2(2), the reference to the Weights and Measures...

      2. 2.Part III does not apply to Northern Ireland.

      3. 3.In regulation 16— (a) for paragraph (1), substitute the following...

      4. 4.In regulation 23— (a) the reference in paragraph (3) to...

      5. 5.In regulation 29(3) the reference to sub-section (1) of section...

  8. Explanatory Note

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources