- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Railways and Other Guided Transport Systems (Safety) Regulations 2006, SCHEDULE 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulations 5(1)(c), and 6(1)(b)
1. The safety management system shall—
(a)describe the distribution of responsibilities, within the operation, for the safety management system;
(b)show how control of the safety management system by the management on different levels is secured;
(c)show how persons carrying out work or voluntary work directly in relation to the operation and their representatives on all levels are involved with the safety management system; and
(d)show how continuous improvement of the safety management system is ensured.
2. The basic elements of a safety management system are—
(a)a statement of the safety policy which has been approved by the chief executive and communicated to all persons carrying out work or voluntary work directly in relation to the operation;
(b)qualitative and quantitative targets for the maintenance and enhancement of safety and plans and procedures for reaching those targets;
(c)procedures to meet relevant technical and operational standards or other requirements as set out in—
(i)TSIs [F1NTSNs];
(ii)national safety rules;
(iii)other relevant safety requirements; and
(iv)decisions of the [F2Office of Rail and Road] addressed to the transport operator in question,
and procedures to ensure compliance with the requirements listed in this paragraph throughout the life-cycle of any relevant equipment or operation which is subject to the requirement in question.
(d)procedures and methods for carrying out risk evaluation and implementing risk control measures when—
(i)there is a change in the way in which the operation in question is carried out; or
(ii)new material is used in the operation in question,
which gives rise to new risks in relation to any infrastructure or the operation being carried out;
(e)provision of programmes for training of persons carrying out work or voluntary work directly in relation to the operation and systems to ensure that the competence of such persons is maintained and that they carry out tasks accordingly;
(f)arrangements for the provision of sufficient information relevant to safety—
(i)within the operation in question; and
(ii)between the operator in question and any other transport operator or an applicant for a safety certificate or a safety authorisation who carries out or who intends to carry out operations on the same infrastructure;
(g)procedures and formats for the documentation of safety information;
(h)procedures to control the lay out of, and changes to, vital safety information;
(i)procedures to ensure that accidents, incidents, near misses and other dangerous occurrences are reported, investigated and analysed and that necessary preventative measures are taken;
(j)provision of plans for action, alerts and information in the case of an emergency which are to be agreed with any public body, including the emergency services, that may be involved in such an emergency; and
(k)provisions for recurrent internal auditing of the safety management system.
Textual Amendments
F1Word in Sch. 1 para. 2(c)(i) inserted (31.12.2020) by The Railways (Interoperability) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/345), reg. 1(2), Sch. 8 para. 3(d); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in Sch. 1 para. 2(c)(iv) substituted (16.10.2015) by The Office of Rail Regulation (Change of Name) Regulations 2015 (S.I. 2015/1682), reg. 1(2), Sch. para. 6(v)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: