- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As made)
Point in time view as at 31/12/2020.
There are currently no known outstanding effects for the The Natural Mineral Water, Spring Water and Bottled Drinking Water (England) Regulations 2007, Paragraph 18.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
18.—(1) For the purpose of paragraph 17(a), a method of analysis for a parameter specified in the first column of the table in Section 2 (minimum performance characteristics for a method of analysis) is a method of analysis that complies with minimum performance characteristics if it is a method of analysis that—
(a)is capable of measuring concentrations equal to the parametric concentration of that parameter with a limit of quantification of 30% or less of the relevant parametric concentration,
(b)has an uncertainty of measurement that does not exceed the percentage of the parametric concentration for the parameter specified in the second column of the table,
(c)in the case of benzo(a)pyrene, complies, where relevant, with the requirement specified in the third column of the table, and
(d)in the case of cyanide, complies with the requirement specified in the fourth column of the table.
(2) In the case of a parameter specified in the first column of the table in Section 2, where a method of analysis that complies with the requirements of sub-paragraph (1) is used to determine whether the concentration of that parameter exceeds the concentration specified for that parameter in the table in Part 3 of Schedule 2, the result of the analysis carried out using that method of analysis must be expressed using at least the same number of significant figures as the number of significant figures used to specify that parametric concentration in the table in Part 3 of Schedule 2.]
Textual Amendments
F1Sch. 12 inserted (6.4.2018) by The Natural Mineral Water, Spring Water and Bottled Drinking Water (England) (Amendment) Regulations 2018 (S.I. 2018/352), reg. 1(1), Sch. 2
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: