2007 No. 3538

ENVIRONMENTAL PROTECTION, ENGLAND AND WALES

The Environmental Permitting (England and Wales) Regulations 2007

Made13th December 2007

Coming into force6th April 2008

These Regulations are made in exercise of the powers conferred by section 2 of, and Schedule 1 to, the Pollution Prevention and Control Act 1999 M1.

The Secretary of State, in relation to England, and the National Assembly for Wales, in relation to Wales, have in accordance with section 2(4) of that Act consulted M2—

a
the Environment Agency;
b
such bodies or persons appearing to them to be representative of the interests of local government, industry, agriculture and small businesses respectively as they consider appropriate; and
c
such other bodies or persons as they consider appropriate.

A draft of this instrument has been approved by a resolution of each House of Parliament and by the National Assembly for Wales pursuant to section 2(8) and (9)(d) and (e) of that Act M3.

Accordingly, the Secretary of State, in relation to England, and the Welsh Ministers, in relation to Wales, make the following Regulations—

Annotations:

Marginal Citations

1999 c. 24. Functions of the Secretary of State under section 2 (except in relation to offshore oil and gas exploration and exploitation), so far as exercisable in relation to Wales, were transferred to the National Assembly for Wales by article 3 of S.I. 2005/1958. Those functions were then transferred to the Welsh Ministers by paragraph 30 of Schedule 11 to the Government of Wales Act 2006, c. 32.

The requirement in that section to consult the bodies and persons mentioned was transferred from the National Assembly for Wales to the Welsh Ministers by paragraph 30 of Schedule 11 to the Government of Wales Act 2006, c. 32. The consultation carried out by the National Assembly for Wales has effect as if it were carried out by the Welsh Ministers by virtue of paragraph 39(3) of that Schedule to that Act.

The reference in section 2(8) to approval by each House of Parliament has effect in relation to exercise of functions by the Welsh Ministers as if it were a reference to approval by the National Assembly for Wales by virtue of paragraph 33 of Schedule 11 to the Government of Wales Act 2006, c. 32.

PART 1General

Citation, commencement and extent1

1

These Regulations—

a

may be cited as the Environmental Permitting (England and Wales) Regulations 2007;

b

come into force on 6th April 2008; and

c

extend to England and Wales only.

2

For the purposes of this regulation—

a

England and Wales includes the sea adjacent to England and Wales out as far as the seaward boundary of the territorial sea; and

b

the sea adjacent to Wales has the same meaning as in section 158 of the Government of Wales Act 2006 M4.

Interpretation: general2

1

Except where otherwise provided, in these Regulations—

“the 1990 Act” means the Environmental Protection Act 1990 M5;
“the 1995 Act” means the Environment Act 1995 M6;
“the 1994 Regulations” means the Waste Management Licensing Regulations 1994 M7;
“the 2000 Regulations” means the Pollution Prevention and Control (England and Wales) Regulations 2000 M8;
“activity” means, subject to Part 1 of Schedule 1, an activity listed in Part 2 of that Schedule;
“the Agency” means the Environment Agency;
“agricultural waste” means waste from premises used for agriculture within the meaning of the Agriculture Act 1947 M9;
“appropriate authority” means—
1. a
  in relation to England, the Secretary of State, and
2. b
  in relation to Wales, the Welsh Ministers;
F5“the Batteries Directive” means Directive 2006/66/EC of the European Parliament and of the Council on batteries and accumulators and waste batteries and accumulators and repealing Directive 91/157/EEC;
“directly associated activity” means—
1. a
  in relation to a SED activity, an operation which—
  1. i
    has a technical connection with the SED activity,
  2. ii
    is carried on on the same site as the SED activity, and
  3. iii
    could have an effect on a discharge of volatile organic compounds into the environment;
2. b
  in relation to any other activity, an operation which—
  1. i
    has a technical connection with the activity,
  2. ii
    is carried on on the same site as the activity, and
  3. iii
    could have an effect on pollution;
“disposal” has the same meaning as in the Waste Framework Directive and related terms must be construed accordingly;
“emission” means—
1. a
  in relation to a Part A installation, the direct or indirect release of substances, vibrations, heat or noise from individual or diffuse sources in the installation into the air, water or land,
2. b
  in relation to a Part B installation, the direct release of substances or heat from individual or diffuse sources in the installation into the air,
3. c
  in relation to Part A mobile plant, the direct or indirect release of substances, vibrations, heat or noise from the mobile plant into the air, water or land,
4. d
  in relation to Part B mobile plant, the direct release of substances or heat from the mobile plant into the air, and
5. e
  in relation to a waste operation not falling within paragraph (a) to (d), the direct or indirect release of substances, vibrations, heat or noise from individual or diffuse sources related to the operation into the air, water or land;
“the End-of-Life Vehicles Directive” means Directive 2000/53/EC of the European Parliament and of the Council on end-of life vehicles M10;
“enforcement notice” has the meaning given in regulation 36(1);
“environmental permit” has the meaning given in regulation 13(1);
“establishment” has the same meaning as in the Waste Framework Directive;
“excluded waste operation” has the meaning given in regulation 4;
“exempt waste operation” has the meaning given in regulation 5;
“exemption registration authority” has the meaning given in paragraph 2 of Schedule 2;
“hazardous waste”, except in Section 5.1 of Part 2 of Schedule 1, has the meaning given by—
1. a
  in England, regulation 6 of the Hazardous Waste (England and Wales) Regulations 2005 M11,
2. b
  in Wales, regulation 6 of the Hazardous Waste (Wales) Regulations 2005 M12;
“installation” means (except where used in the definition of “excluded plant” in Section 5.1 of Part 2 of Schedule 1)—
1. a
  a stationary technical unit where one or more activities are carried on, and
2. b
  any other location on the same site where any other directly associated activities are carried on,and references to an installation include references to part of an installation;
“the IPPC Directive” means Council Directive 96/61/EC concerning integrated pollution prevention and control M13;
“landfill” has the meaning given in Article 2(g) of the Landfill Directive;
“landfill closure notice” means a closure notice served under paragraph 10 of Schedule 10;
“the Landfill Directive” means Council Directive 1999/31/EC on the landfill of waste M14, as read with Council Decision 2003/33/ECM15 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC;
“local authority” has the meaning given in regulation 6;
“mobile plant” means plant which—
1. a
  is not an installation,
2. b
  is used to carry on an activity or waste operation, and
3. c
  where not used to carry on a Part A activity, is designed to move or be moved whether on roads or other land;
“non-hazardous waste”, except in Section 5.1 of Part 2 of Schedule 1, means waste which is not hazardous waste;
“operator” has the meaning given in regulation 7;
“Part A installation”, “Part A(1) installation”, “Part A(2) installation” and “Part B installation” have the meanings given in regulation 3(2);
“Part A mobile plant”, “Part A(1) mobile plant”, “Part A(2) mobile plant” and “Part B mobile plant” have the meanings given in regulation 3(3);
“pollution” means any emission as a result of human activity which may—
1. a
  be harmful to human health or the quality of the environment,
2. b
  cause offence to a human sense,
3. c
  result in damage to material property, or
4. d
  impair or interfere with amenities and other legitimate uses of the environment;
“public register” has the meaning given by regulation 46(1);
“recovery” has the same meaning as in the Waste Framework Directive and related terms must be construed accordingly;
“regulated facility” has the meaning given by regulation 8;
“regulator” means the authority on whom functions are conferred by regulation 32, or by a direction under regulation 33;
“relevant function” has the meaning given by regulation 9;
“revocation notice” means a notice served under regulation 22(3);
“rule-making authority” means—
1. a
  in relation to a regulated facility for which a local authority is the regulator, the appropriate authority, and
2. b
  in relation to any other regulated facility, the Agency;
“standard facility” means a regulated facility described in standard rules published under regulation 26(5);
“SED activity” means an activity falling within section 7 of Part 2 of Schedule 1;
“SED installation” means—
1. a
  a stationary technical unit where one or more SED activities are carried on, and
2. b
  any other location on the same site where any other directly associated activities are carried on;
“suspension notice” has the meaning given in regulation 37(1);
“undertaking” has the same meaning as in the Waste Framework Directive;
“waste”, except where otherwise defined, means anything that—
1. a
  is waste for the purposes of the Waste Framework Directive, and
2. b
  is not excluded from the scope of that Directive by Article 2(1) of that Directive;
F6“waste battery or accumulator” has the meaning given by Article 3(7) of the Batteries Directive, but does not include any waste which is excluded from the scope of that Directive by Article 2(2);
“the Waste Framework Directive” means Directive 2006/12/EC of the European Parliament and of the Council on waste M16;
“the Waste Incineration Directive” means Directive 2000/76/EC of the European Parliament and of the Council on the incineration of waste M17;
“waste oil” means mineral-based lubricating or industrial oil which has become unfit for the use for which it was originally intended and, in particular, used combustion engine oil, gearbox oil, mineral lubricating oil, oil for turbines and hydraulic oil;
“waste operation” means recovery or disposal of waste;
“WEEE” has the meaning given by Article 3(b) of the WEEE Directive;
“WEEE Directive” means Directive 2002/96/EC of the European Parliament and of the Council on waste electrical and electronic equipment M18; and
“working day” means a day other than—
1. a
  a Saturday or a Sunday,
2. b
  Good Friday or Christmas Day, or
3. c
  a day which is a bank holiday under the Banking and Financial Dealings Act 1971 M19.

2

Where the duration of a period of time is expressed as being from one event to another event, that period—

a

starts on the day on which the first event occurs, and

b

ends on the day on which the second event occurs.

3

In these Regulations, a power to give a direction includes a power to vary or revoke it.

Interpretation: activities, installations and mobile plant3

1

In these Regulations—

“Part A activity” means a Part A(1) activity or a Part A(2) activity;
“Part A(1) activity” means an activity falling within Part A(1) of any Section in Part 2 of Schedule 1;
“Part A(2) activity” means an activity falling within Part A(2) of any Section in Part 2 of Schedule 1; and
“Part B activity” means an activity falling within Part B of any Section in Part 2 of Schedule 1.

2

In these Regulations—

“Part A installation” means a Part A(1) installation or a Part A(2) installation;
“Part A(1) installation” means an installation where a Part A(1) activity is carried on, including an installation also carrying on a Part A(2) activity or a Part B activity;
“Part A(2) installation” means an installation where a Part A(2) activity is carried on, not being a Part A(1) installation but including an installation also carrying on a Part B activity; and
“Part B installation” means, subject to Sections 2.2, 5.1 and 6.4 of Part 2 of Schedule 1, an installation where a Part B activity is carried on, not being a Part A installation.

3

In these Regulations—

“Part A mobile plant” means Part A(1) mobile plant or Part A(2) mobile plant;
“Part A(1) mobile plant” means mobile plant used to carry on a Part A(1) activity, including plant also carrying on a Part A(2) activity or a Part B activity;
“Part A(2) mobile plant” means mobile plant used to carry on a Part A(2) activity, not being Part A(1) mobile plant but including plant also carrying on a Part B activity; and
“Part B mobile plant” means mobile plant used to carry out a Part B activity, not being Part A mobile plant.

Interpretation: excluded waste operation4

In these Regulations, “excluded waste operation” means—

a

a waste operation which is or forms part of an operation which—

i

is the subject of a licence under Part II of the Food and Environment Protection Act 1985 M20, or

ii

by virtue of an order under section 7 of that Act, does not require such a licence;

b

the disposal of liquid waste under a consent under Chapter II of Part III of the Water Resources Act 1991 M21;

c

the disposal of agricultural waste in or on land under an authorisation under regulation 18 of the Groundwater Regulations 1998 M22;

d

the disposal or recovery of waste which is not to be treated as industrial waste or commercial waste by virtue of regulation 7(1) of the Controlled Waste Regulations 1992 M23.

Interpretation: exempt waste operation5

1

In these Regulations, a waste operation is an “exempt waste operation” if—

a

the requirements in paragraph 3(1) of Schedule 2 are met in respect of the waste operation;

b

it falls within a description in Part 1 of Schedule 3; and

c

the type and quantity of waste submitted to the waste operation, and the method of disposal or recovery, are consistent with the need to attain the objectives mentioned in Article 4(1) of the Waste Framework Directive.

2

But a waste operation is not an exempt waste operation to the extent that it involves hazardous waste or the storage or treatment of WEEE, unless otherwise indicated in Part 1 of Schedule 3.

3

Schedule 2 (exempt waste operations: general) has effect.

In these Regulations “operator” means—

a

the person who has control over the operation of a regulated facility;

b

if a regulated facility has not been put into operation, the person who will have control over the facility when it is put into operation; or

c

if a regulated facility has ceased to be in operation, the person who holds the environmental permit which authorised the operation of the facility.

Interpretation: regulated facility8

1

Subject to paragraphs (2) and (3), in these Regulations, “regulated facility” means any of the following—

a

an installation,

b

mobile plant other than waste mobile plant,

c

waste mobile plant,

d

a waste operation not carried on at an installation or by means of mobile plant.

2

An exempt waste operation is not a regulated facility.

3

The following are not regulated facilities within paragraph (1)(c) or (d)—

a

an excluded waste operation,

b

the disposal or recovery of household waste from a domestic property within the curtilage of that property by a person other than an establishment or undertaking.

4

In this regulation—

“household waste” has the meaning given in section 75(5) of the 1990 Act; and
“waste mobile plant” means mobile plant which—
1. a
  is used to carry on a waste operation, and
2. b
  is not Part A mobile plant or Part B mobile plant.

e

exercising any of the following powers relating to enforcement—

i

the power to serve an enforcement notice, or

ii

the power to serve a suspension notice.

Giving notices, notifications and directions, and the submission of forms10

1

In this regulation, “instrument” means a notice, notification, certificate, direction or form under these Regulations.

2

An instrument must be in writing.

3

An instrument may be served on or given to a person by—

a

delivering it to him in person;

b

leaving it at his proper address, or

c

sending it by post or electronic means to his proper address.

4

In the case of a body corporate, an instrument may be served on or given to the secretary or clerk of that body.

5

In the case of a partnership, an instrument may be served on or given to a partner or a person having control or management of the partnership business.

6

If a person to be served with or given an instrument has specified an address in the United Kingdom other than his proper address at which he or someone on his behalf will accept instruments of that description, that address must also be treated as his proper address.

7

For the purposes of this regulation, “proper address” means—

a

in the case of a body corporate or their secretary or clerk—

i

the registered or principal office of that body, or

ii

the email address of the secretary or clerk;

b

in the case of a partnership or a partner or person having control or management of the partnership business—

i

the principal office of the partnership, or

ii

the email address of a partner or a person having that control or management;

c

in any other case, a person's last known address, which includes an email address.

8

For the purposes of paragraph (7), the principal office of a company registered outside the United Kingdom or of a partnership established outside the United Kingdom is their principal office in the United Kingdom.

9

A form provided by the regulator which specifies an electronic address for submission may be submitted electronically to that address.

10

A form provided by the regulator for completion and submission through a website may be submitted through that site.

PART 2Environmental Permits

CHAPTER 1Application of these Regulations to the Crown and requirement for an environmental permit

Application of these Regulations to the Crown11

Schedule 4 (application of these Regulations to the Crown) has effect.

Requirement for an environmental permit12

No person may operate a regulated facility except under and to the extent authorised by an environmental permit.

CHAPTER 2Grant of an environmental permit

Grant of an environmental permit13

1

On the application of an operator, the regulator may grant to that operator a permit (in these Regulations, an “environmental permit”) authorising the operation of a regulated facility.

2

Part 1 (grant, variation, transfer and surrender of environmental permits) of Schedule 5 applies in relation to an application for the grant of an environmental permit.

Content and form of an environmental permit14

1

An environmental permit must specify—

of more than one standard facility (other than a standard facility to which the IPPC Directive applies),

but may not otherwise authorise the operation of more than one regulated facility.

regulation 18(2),

ii

regulation 22(5),

iii

paragraph 19(2) of Part 1 of Schedule 5.

CHAPTER 3Variation, transfer, revocation and surrender of an environmental permit

Variation of an environmental permit20

1

The regulator may vary an environmental permit on the application of the operator or on its own initiative.

2

But a variation made under paragraph (1) must not reduce the extent of the site of a regulated facility.

3

Paragraph (2) does not apply to Part B installations.

4

Part 1 (grant, variation, transfer and surrender of environmental permits) of Schedule 5 applies in relation to an application to vary an environmental permit or a proposal to vary an environmental permit on the initiative of the regulator under paragraph (1).

Transfer of an environmental permit21

1

The regulator may transfer an environmental permit in whole or in part from the operator to another person on the joint application of the operator and that other person.

2

Part 1 (grant, variation, transfer and surrender of environmental permits) of Schedule 5 applies in relation to the transfer of an environmental permit in whole or in part.

a

an enforcement notice is in force in respect of an environmental permit; and

b

the permit is transferred to another person, either in whole or in part,

the duty to comply with the enforcement notice is also transferred to the other person to the extent that it relates to the permit or part transferred.

only the variations specified are subject to the right of appeal in regulation 31(1)(b).

Revocation of an environmental permit: steps to be taken after the revocation takes effect23

1

This paragraph applies where the regulator has decided to revoke an environmental permit and it considers that, after the revocation takes effect, it is appropriate for the operator to take steps—

a

to avoid a pollution risk resulting from the operation of the regulated facility; or

b

to return the site of the regulated facility to a satisfactory state, having regard to the state of the site before the facility was put into operation.

2

But this paragraph does not apply in relation to a Part B installation or Part B mobile plant.

3

If the operator is already required to take the steps mentioned in paragraph (1) under the environmental permit, the revocation notice must specify the regulator's view under paragraph (1) and state that paragraph (4) applies.

4

The environmental permit continues to have effect to the extent that it requires the steps to be taken until the regulator issues a certificate stating that it is satisfied that all the steps have been taken.

5

If the operator is not already required to take the steps mentioned in paragraph (1) under the environmental permit, the revocation notice must specify the regulator's view under paragraph (1) and the steps to be taken.

6

If paragraph (5) applies, unless the regulator issues a certificate stating that it is satisfied that all the steps have been taken, the steps must be treated as if they were conditions of an environmental permit for the purposes of—

a

regulation 20;

b

regulation 36; and

c

the offence of failing to comply with or contravening a condition in regulation 38(1)(b).

the date the variation takes effect.

7

If the date specified in the notice under paragraph (6)(c) is later than the date specified in the notification under paragraph (3), the variation and partial surrender both take effect on the later date.

Application to surrender an environmental permit25

1

This regulation applies to the surrender of an environmental permit to which regulation 24 does not apply.

2

An operator may surrender an environmental permit to which this regulation applies, in whole or in part, by application to the regulator.

3

Part 1 (grant, variation, transfer and surrender of environmental permits) of Schedule 5 applies in relation to an application to surrender an environmental permit in whole or in part.

CHAPTER 4Standard rules

Preparation and revision of standard rules26

1

A rule-making authority may prepare standard rules for such regulated facilities as are described in those rules.

2

In preparing or revising standard rules the authority must consult—

a

such persons or bodies as it considers are representative of the interests of communities likely to be affected by, or persons operating, the regulated facilities described in the rules; and

b

such other persons as it considers are likely to be affected by or have an interest in the rules.

3

But the duty in paragraph (2) does not apply in relation to revisions which comprise only minor administrative changes.

4

The authority must keep under review all standard rules published by it under this regulation and revise those rules when it considers necessary.

5

The authority must publish on its website all standard rules prepared or revised by it under this regulation.

6

The duty in paragraph (2) may be satisfied by a consultation carried out partially or wholly before the coming into force of these Regulations.

Standard rules as conditions of an environmental permit27

1

This regulation applies where a rule-making authority has published standard rules under regulation 26(5).

2

At the request of the operator of a standard facility the regulator may include in the environmental permit authorising the facility a term providing that the relevant rules are conditions of the permit.

3

If the regulator includes such a term, the relevant rules are conditions of the permit for the purposes of these Regulations, but there is no right of appeal under regulation 31 in relation to such a condition or the relevant rules.

4

In this regulation “relevant rules” means the standard rules which apply to the standard facility.

Notification of revisions of standard rules28

1

This regulation applies where the rule-making authority proposes to revise standard rules under regulation 26(4).

2

Before the rule-making authority complies with regulation 26(5), the regulator must notify any operator who holds a relevant environmental permit—

a

of the proposed revisions;

b

of the date when the revised rules will be published, which must not be less than 3 months from the date the notification is served; and

c

that on this date the revised rules will become conditions of the environmental permit.

3

But the authority may publish the revised rules before 3 months from the date the notification is served if the revisions comprise only minor administrative changes.

4

The revised rules take effect when published under regulation 26(5).

5

In this regulation “relevant environmental permit” means an environmental permit which will be affected by the proposed revisions.

Revocation of standard rules29

The rule-making authority may revoke standard rules, but before doing so must consult the persons and bodies referred to in regulation 26(2).

Variation of an environmental permit: revocation of standard rules30

1

This regulation applies to an environmental permit which includes a standard rules term if the standard rules applying by virtue of that term have been revoked by the regulator.

2

The revoked rules continue to have effect until the regulator varies the permit under paragraph (3).

3

As soon as reasonably practicable after the revocation of the rules, the regulator must vary the permit so as to—

a

remove the standard rules term; and

b

include such alternative conditions as it considers appropriate.

4

In this regulation, “standard rules term” means a term of the type mentioned in regulation 27(2).

CHAPTER 5Appeals in relation to environmental permits

Appeals to an appropriate authority31

1

Subject to paragraphs (2) and (3), the following persons may appeal to the appropriate authority—

a

a person whose application—

i

for the grant of an environmental permit,

ii

to vary an environmental permit,

iii

to transfer an environmental permit in whole or in part, or

iv

8

An appeal under paragraph (1) does not have the effect of suspending the decision or notice in question.

9

But where an appeal is brought against a revocation notice, the revocation does not take effect until the final determination or the withdrawal of the appeal.

PART 3Discharge of functions in relation to a regulated facility

Discharge of functions32

1

Functions in relation to a Part A(1) installation or Part A(1) mobile plant are exercisable by the Agency.

2

Functions in relation to a Part A(2) installation or a Part B installation are exercisable by the local authority in whose area the installation is or will be operated.

3

If the operator of Part A(2) mobile plant or Part B mobile plant has his principal place of business in England and Wales, functions in relation to that plant are exercisable by the local authority in whose area the place of business is.

4

If the operator of Part A(2) mobile plant or Part B mobile plant does not have his principal place of business in England and Wales, functions in relation to that plant are exercisable by—

a

the local authority which granted the environmental permit authorising the operation of the plant; or

b

if no permit has been granted, the local authority in whose area the plant is first operated, or is intended to be first operated.

5

Functions in relation to a waste operation which is carried on other than at an installation, or by Part A mobile plant or Part B mobile plant, are exercisable by the Agency.

Direction to a regulator: discharge of functions by a different regulator33

1

An appropriate authority may direct—

a

the Agency to exercise such local authority functions as are, and for such period as is, specified in the direction; or

b

a local authority to exercise such Agency functions as are, and for such period as is, specified in the direction.

2

A direction under this regulation may include such saving and transitional provisions as the appropriate authority considers necessary or expedient.

3

A direction under this regulation may be made in respect of a description of regulated facility or a specific regulated facility.

4

A direction under paragraph (1)(b) may not be made in relation to a waste operation carried on other than at an installation or by means of mobile plant.

5

When giving a direction under this regulation the appropriate authority must notify the persons in paragraph (6) of the direction and publish the direction on its website.

6

The persons are—

a

the Agency; and

b

any local authority or other person who in the appropriate authority's opinion are affected by the direction.

7

An appropriate authority must not comply with a duty under paragraph (5) in a case where the authority considers that to do so would be contrary to the interests of national security.

8

In this regulation—

“local authority functions” means functions which are exercisable by a local authority by virtue of regulation 32 or paragraph 2 of Schedule 2 (ignoring any direction under this regulation); and
“Agency functions” means functions which are exercisable by the Agency by virtue of regulation 32 or paragraph 2 of Schedule 2 (ignoring any direction under this regulation).

Review of environmental permits and inspection of regulated facilities34

1

The regulator must periodically review environmental permits.

2

The regulator must make appropriate periodic inspections of regulated facilities.

Provision in relation to types of regulated facility35

The following Schedules, which contain provision in relation to types of regulated facility, have effect—

a

Schedule 7 (provision in relation to Part A installations and Part A mobile plant);

b

Schedule 8 (provision in relation to Part B installations and Part B mobile plant);

c

Schedule 9 (provision in relation to waste operations);

d

Schedule 10 (provision in relation to landfill);

e

Schedule 11 (provision in relation to waste motor vehicles);

f

Schedule 12 (provision in relation to waste electrical and electronic equipment);

g

Schedule 13 (provision in relation to waste incineration);

h

Schedule 14 (provision in relation to SED installations);

i

Schedule 15 (provision in relation to certain combustion plants);

j

Schedule 16 (provision in relation to asbestos);

k

Schedule 17 (provision in relation to titanium dioxide);

l

Schedule 18 (provision in relation to petrol vapour recovery);

F7m

Schedule 18A (provision in relation to waste batteries and accumulators).

PART 4Enforcement and offences

Enforcement notices36

1

If the regulator considers that an operator has contravened, is contravening, or is likely to contravene an environmental permit condition, the regulator may serve a notice on him under this regulation (in these Regulations, an “enforcement notice”).

2

An enforcement notice must—

a

state the regulator's view under paragraph (1);

b

specify the matters constituting the contravention or making a contravention likely;

c

specify the steps that must be taken to remedy the contravention or to ensure that the likely contravention does not occur; and

d

specify the period within which those steps must be taken.

3

Steps that may be specified in an enforcement notice include steps—

a

to make the operation of a regulated facility comply with the environmental permit conditions; and

b

to remedy the effects of pollution caused by the contravention.

4

The regulator may withdraw an enforcement notice at any time by further notice served on the operator.

Suspension notices37

1

If the regulator considers that the operation of a regulated facility under an environmental permit involves a risk of serious pollution, it may serve a notice on the operator under this regulation (in these Regulations, a “suspension notice”).

2

Paragraph (1) applies whether or not the manner of operating the facility which involves the risk is subject to or contravenes an environmental permit condition.

3

A suspension notice must—

a

state the regulator's view under paragraph (1);

b

specify—

i

the risk of serious pollution mentioned in that paragraph,

ii

the steps that must be taken to remove that risk, and

iii

the period within which the steps must be taken;

c

state that the environmental permit ceases to have effect to the extent specified in the notice until the notice is withdrawn; and

d

if the environmental permit continues to authorise an operation, state any steps (in addition to those already required to be taken by the environmental permit conditions) that are to be taken when carrying on that operation.

4

If a suspension notice is served the environmental permit ceases to have effect to the extent stated in the notice.

5

The regulator—

a

may withdraw a suspension notice at any time by further notice served on the operator; and

b

must withdraw a notice when satisfied that the steps specified in it have been taken.

Offences38

1

It is an offence for a person—

a

to contravene, or knowingly cause or knowingly permit the contravention of, regulation 12;

b

to fail to comply with or to contravene an environmental permit condition;

c

to fail to comply with the requirements of an enforcement notice, a suspension notice or a landfill closure notice;

d

to fail to comply with a notice under regulation 60(2) requiring the provision of information, without reasonable excuse;

e

to make a statement which he knows to be false or misleading in a material particular, or recklessly to make a statement which is false or misleading in a material particular, where the statement is made—

i

in purported compliance with a requirement to provide information imposed by or under a provision of these Regulations, or

ii

for the purpose of obtaining the grant of an environmental permit to himself or another person, or the variation, transfer in whole or in part, or surrender in whole or in part of an environmental permit;

f

intentionally to make a false entry in a record required to be kept under an environmental permit condition;

g

with intent to deceive—

i

to forge or use a document issued or authorised to be issued or required for any purpose under an environmental permit condition, or

ii

to make or have in his possession a document so closely resembling such a document as to be likely to deceive.

2

It is an offence for an establishment or undertaking to—

a

fail to comply with paragraph 9 or 12(3) of Schedule 2; or

b

intentionally make a false entry in a record required to be kept under paragraph 12(3) of Schedule 2.

3

If an offence committed by a person under this regulation is due to the act or default of some other person, that other person is also guilty of the offence and liable to be proceeded against and punished accordingly.

he took all such steps as were reasonably practicable in the circumstances for minimising pollution; and

b

particulars of the acts were furnished to the regulator as soon as reasonably practicable after they were done.

Offences by bodies corporate41

1

If an offence committed under these Regulations by a body corporate is shown—

a

to have been committed with the consent or connivance of an officer; or

b

to be attributable to any neglect on his part,

the officer as well as the body corporate is guilty of the offence and liable to be proceeded against and punished accordingly.

2

If the affairs of a body corporate are managed by its members, paragraph (1) applies in relation to the acts and defaults of a member in connection with his functions of management as if he were a director of the body.

3

In this regulation, “officer”, in relation to a body corporate, means a director, member of the committee of management, chief executive, manager, secretary or other similar officer of the body, or a person purporting to act in any such capacity.

Enforcement by the High Court42

If the regulator considers that proceedings against a person for an offence under regulation 38(1)(c) would afford an ineffectual remedy against the person, the regulator may take proceedings in the High Court for the purpose of securing compliance with the enforcement notice, suspension notice or landfill closure notice.

Admissibility of evidence43

Where, pursuant to an environmental permit granted by a local authority, an entry is required to be made in any record as to the observance of a condition of the environmental permit and the entry has not been made, that fact is admissible as evidence that the condition has not been observed.

Power of court to order cause of offence to be remedied44

1

This regulation applies where a person is convicted of an offence under regulation 38(1)(a), (b) or (c) in respect of a matter which appears to the court to be a matter which it is in his power to remedy.

2

In addition to or instead of a punishment imposed under regulation 39 the court may order the person to take such steps for remedying the matter within such period as may be specified in the order.

3

The period may be extended, or further extended, by order of the court on an application made before the end of the period or the extended period, as the case may be.

4

If a person is ordered to remedy a matter, that person is not liable under regulation 38 in respect of that matter during the period or the extended period.

PART 5Public Registers

Interpretation of this Part45

In this Part—

“confidential information” means information that is commercially or industrially confidential in relation to any person;
“final confidentiality decision” means—
1. a
  a determination made in accordance with regulation 51,
2. b
  a determination under section 22(2) or 66(2) of the 1990 Act,
3. c
  a determination under regulation 31(2) of the 2000 Regulations, or
4. d
  the determination or withdrawal of an appeal in relation to a determination referred to in sub-paragraphs (a) to (c);
“the information subject” means the person to whom information relates;
“objection notice” means a notice given under regulation 48(1)(b).

A public register may be kept in any form.

Exclusion from public registers of information affecting national security47

1

The appropriate authority may direct the regulator that in the interests of national security specified information or a specified description of information must be excluded from a public register.

2

The regulator must notify the appropriate authority of any information it excludes from a public register pursuant to such a direction.

3

The appropriate authority may direct the regulator that in the interests of national security a specified description of information must be referred to the authority for its determination before the information is included on a public register.

4

A person may give a notice to the appropriate authority stating that in his opinion the inclusion of information on a public register would be contrary to the interests of national security.

5

A notice under paragraph (4) must specify the information and indicate its apparent nature.

6

A person giving a notice under paragraph (4) must at the same time notify the regulator.

7

The regulator must not include information notified under paragraph (4) on a public register unless the appropriate authority determines that it may be included.

Exclusion from public registers of confidential information48

1

The regulator must exclude information from a public register, unless a condition in paragraph (2) is met, if it—

a

considers that the information may be confidential information; or

b

receives notice from the information subject which—

i

states that he considers the information is confidential information, and

ii

gives reasons for that view.

2

The conditions are that—

a

in relation to paragraph (1)(a), the regulator has given a notice under regulation 49(1) and the information subject has given notice of consent under regulation 49(2)(a);

b

in relation to paragraph (1)(a) or (b)—

i

a final confidentiality decision that the information should be included on the register has been made, or

ii

the appropriate authority has given a direction under regulation 56(1) which requires the information to be included on the register.

Procedure if the regulator considers that information may be confidential49

1

If the regulator considers that information may be confidential information but has not received an objection notice, it must give notice of that view to the information subject.

2

The information subject may within 15 working days after the date of the notice given by the regulator under paragraph (1)—

a

give notice to the regulator consenting to the regulator including the information on the register; or

b

give an objection notice to the regulator.

Duty to determine confidentiality50

The regulator must determine whether information must be included on the public register, or excluded from the public register because it is confidential information, if—

a

having given notice under regulation 49(1), it does not receive notice of consent in accordance with regulation 49(2)(a); or

b

it receives an objection notice.

Determination of confidentiality51

1

When making a determination required by regulation 50, the regulator must comply with this regulation.

2

In making the determination, the regulator must—

a

take any reasons given in an objection notice into account;

b

apply a presumption in favour of including the information on the public register; and

c

determine to exclude the information from the public register if it considers that—

i

the information is commercial or industrial information,

ii

its confidentiality is provided by law to protect a legitimate economic interest, and

iii

in all the circumstances, the public interest in maintaining the confidentiality of the information outweighs the public interest in including it on the register.

3

But, to the extent that information relates to emissions the regulator must determine to include it on the public register.

4

Nothing in this regulation authorises the exclusion from the public register of information contained in or otherwise held with other information excluded from the register unless the information is not reasonably capable of being separated for the purposes of inclusion on the register.

Procedure following a determination52

1

The regulator must give notice of its determination, the reasons for it and the details of the appeals procedure to the information subject within—

a

1

If the appropriate authority allows the appeal, the regulator must exclude the information from the public register.

2

If the appropriate authority rejects the appeal or the appeal is withdrawn, the regulator must include the information on the public register.

Reconsideration of confidentiality55

1

The regulator must cease to treat information as confidential information at the expiry of—

a

a period of four years after the final confidentiality decision; or

b

such shorter period as is specified in that decision.

2

But if the person to whom the information relates gives notice to the regulator before the expiry of that period that he considers that the information remains confidential information—

a

regulation 48 applies in respect of the information and the regulator must treat the notice as an objection notice; and

b

regulations 50 to 54 apply notwithstanding any previous compliance with those regulations in relation to the information.

Directions of the appropriate authority in relation to confidentiality56

1

The appropriate authority may direct the regulator that specified information, or a specified description of information, must be included on the public register even though it is confidential information.

2

But, the appropriate authority must not give a direction under paragraph (1) unless it considers that the public interest in including such information on the register outweighs the public interest in maintaining its confidentiality.

PART 6Powers and functions of the regulator and the appropriate authority

Power of the regulator to prevent or remedy pollution57

1

4

The Agency must comply with any published statement when exercising its functions under regulations 26 and 29, and Schedules 2 and 3.

5

The duty in paragraph (2) may be satisfied by a consultation carried out partially or wholly before the coming into force of these Regulations.

6

In this regulation, “public participation duties” means the duties in the following provisions—

a

regulation 26;

b

regulation 29; and

c

paragraphs 6 and 8(2) of Schedule 5.

Power to require the provision of information60

1

For the purposes of discharging its functions under these Regulations, an appropriate authority may, by notice served on a regulator, require the regulator to provide such information as is specified in the notice.

2

For the purposes of discharging its functions under these Regulations, a regulator may, by notice served on any person, require that person to provide such information in such form and within such period as is specified in the notice.

3

A notice under paragraph (2) may require a person to provide any information on emissions where that requirement is reasonable, including the provision of information—

a

not in the person's possession; and

b

which would not usually come into the person's possession.

4

For the purposes of this regulation the discharge by the appropriate authority of—

a

an obligation of the United Kingdom under the Community Treaties; or

b

an international obligation of the United Kingdom,

must be treated as a function of the authority under these Regulations.

5

For the purposes of this regulation the compilation of an inventory of emissions (whether or not from a regulated facility) must be treated as a function of the regulator under these Regulations.

Directions to a regulator: general61

1

An appropriate authority may give directions to the regulator of a general or specific character with respect to the carrying out of its functions under these Regulations.

2

Without prejudice to the generality of the power in paragraph (1), a direction may direct the regulator to exercise or not to exercise—

a

specified powers;

b

its powers in specified circumstances; or

c

its powers in a specified manner.

3

The regulator must comply with a direction given to it under these Regulations.

to vary an environmental permit.

Directions to the Agency: installations outside the United Kingdom63

1

This regulation applies where an appropriate authority receives information pursuant to Article 17(1) of the IPPC Directive in relation to the operation of an installation outside the United Kingdom which is likely to have a significant negative effect on the environment of England or Wales.

2

For the purpose of complying with Article 17(2) of the IPPC Directive, the appropriate authority must direct the Agency to take such steps as it considers appropriate to—

a

bring the information to the attention of persons likely to be affected by the operation of the installation; and

b

provide them with an opportunity to comment on the information.

Guidance to regulators and exemption registration authorities64

1

An appropriate authority may issue guidance to a regulator or exemption registration authority with respect to the exercise of its functions under these Regulations.

2

In the exercise of those functions the regulator or exemption registration authority must have regard to the guidance.

A scheme must provide for the payment of sums by a local authority to the Agency where those sums are related to expenditure by the Agency under regulation 58 or in preparing guidance referred to in paragraph (3)(c).

5

If a regulator considers that an operator has failed to pay a charge specified in a scheme in respect of the subsistence of the operator's permit, the regulator may revoke the permit.

Plans relating to emissions66

1

Subject to paragraph (3), an appropriate authority may make plans for—

a

the setting of limits on the total amount, or the total amount in any period, of emissions from all or any description of source; or

b

the allocation of quotas relating to such emissions.

2

If the appropriate authority allocates a quota in a plan made under paragraph (1) it may also make a scheme for the trading or other transfer of that quota.

3

This regulation does not apply to an emission plan.

4

In this regulation—

“emission” means the direct or indirect release of any substance from individual or diffuse sources into the air, water or land;
“emission plan” has the meaning given in the Large Combustion Plants (National Emission Reduction Plan) Regulations 2007 M26.

PART 7Miscellaneous and transitional provision, savings, consequential amendments, revocations and repeals

Interpretation of this Part67

In this Part—

“at the relevant time” means immediately before the coming into force of these Regulations;
“disposal licence” means a disposal licence issued under section 5 of the Control of Pollution Act 1974 M27;
“PPC permit” means a permit granted under regulation 10 of the 2000 Regulations M28;
“transitional application” means an application mentioned in regulation 70(1)(c) or (d) or to which regulation 71 applies; and
“waste management licence” means a licence granted under section 35 of the 1990 Act M29.

Further provision in relation to waste68

1

Section 33(1)(a) of the 1990 Act does not apply to an operation falling within a description in Part 2 of Schedule 3.

2

But, paragraph (1) does not apply—

a

to the extent that the operation involves hazardous waste, or the storage or treatment of WEEE, unless otherwise indicated in that Part;

b

in relation to an operation falling within a description in paragraph 50, 51 or 52 of Schedule 3 unless the operation is carried on—

i

by or with the consent of the occupier of the land where it is carried on, or

ii

by a person who is otherwise entitled to do so on that land.

3

Schedule 20 (further provision in relation to waste) has effect.

F2Further provision in relation to waste batteries and accumulators68A

1

Paragraph (2) applies to any environmental permit which—

a

immediately before the coming into force of the Waste Batteries and Accumulators Regulations 2009, authorised a waste operation which involves treatment of waste batteries or accumulators; and

b

does not require compliance with Article 12(2) of the Batteries Directive.

2

If this paragraph applies, the environmental permit must be read as if it contained the following condition—

Treatment of waste batteries and accumulators must meet the minimum requirements set out in Annex III, Part A of Directive 2006/66/EC of the European Parliament and of the Council on batteries and accumulators and waste batteries and accumulators and repealing Directive 91/157/EEC.

3

In this regulation, “treatment” has the meaning given in Article 3(10) of the Batteries Directive.

Transitional provision: general69

1

Except where it is the subject of a transitional application, a disposal licence, PPC permit or waste management licence which was in force at the relevant time becomes an environmental permit on the coming into force of these Regulations and must be treated as if it was granted under regulation 13(1).

2

The holder of a waste management licence which becomes an environmental permit under these Regulations must be treated as the operator under that permit for the purposes of these Regulations.

3

An establishment or undertaking which at the relevant time was registered in relation to an exempt activity under regulation 18 of the 1994 Regulations M30 is deemed to be registered in relation to an exempt waste operation under Schedule 2 on the coming into force of these Regulations.

4

The information on any register at the relevant time which was required to be kept by—

a

section 20(1) or 64(1) of the 1990 Act M31; or

b

regulation 29(1) of the 2000 Regulations,

is deemed to become information kept on a public register under these Regulations on their coming into force, to the extent that such keeping is required.

5

Paragraph (6) applies where—

a

a PPC permit authorising the operation of an installation becomes an environmental permit by virtue of these Regulations; and

b

the environmental permit does not contain a condition giving effect to Article 12(1) of the IPPC Directive.

6

If this paragraph applies, the environmental permit must be read as if it contained the following condition—

If the operator proposes to make a change in operation of the installation, he must, at least 14 days before making the change, notify the regulator in writing. The notification must contain a description of the proposed change in operation. It is not necessary to make such a notification if an application to vary this permit has been made and the application contains a description of the proposed change. In this condition “change in operation” means a change in the nature or functioning, or an extension, of the installation, which may have consequences for the environment.

Transitional provision: conversion of permits and licences subject to certain applications70

1

Each of the following becomes an environmental permit on the determination date and must be treated as if it was granted under regulation 13(1)—

a

A PPC permit granted on the determination of an application to which this regulation applies becomes an environmental permit on the determination date and must be treated as if it was granted under regulation 13(1).

4

In this regulation, “existing” and “determination date” have the meanings given at the relevant time by paragraph 6 of Schedule 3 to the 2000 Regulations.

Savings72

1

Notwithstanding their repeal or revocation by these Regulations, the provisions of the 1990 Act, the 2000 Regulations and the 1994 Regulations continue to have effect for the purposes of—

a

determining an application for the grant of a PPC permit or waste management licence which was outstanding at the relevant time;

b

giving effect to a notice served before the coming into force of these Regulations;

c

determining an appeal brought before the coming into force of these Regulations; and

d

bringing and determining an appeal, after the coming into force of these Regulations, in respect of—

i

the determination of an application referred to in sub-paragraph (a), or

ii

a notice served before the coming into force of these Regulations.

2

The enactments repealed, revoked and amended by these Regulations continue to have effect until the determination date as if they had not been repealed, revoked or amended, for any purpose in connection with—

a

a transitional application; and

b

an operation to which such an application relates,

and these Regulations, other than this paragraph, do not apply for such a purpose until that date.

3

Notwithstanding their repeal by these Regulations, the provisions of the 1990 Act continue to have effect for the purposes of paragraph 20 of Schedule 1 to the Pollution Prevention and Control Act 1999.

4

Notwithstanding its revocation by these Regulations, paragraph 7 of Schedule 4 to the 1994 Regulations continues to have effect in relation to sections 12(3A), 31(3) and 36(3) of the Town and Country Planning Act 1990 M32 to the extent that those provisions are saved by—

a

in England, article 4 of, and Schedule 2 to, the Planning and Compulsory Purchase Act 2004 (Commencement No. 2, Transitional Provisions and Savings) Order 2004 M33;

b

in Wales, article 3 of, and Schedule 2 to, the Planning and Compulsory Purchase Act 2004 (Commencement No. 6, Transitional Provisions and Savings) Order 2005 M34.

5

Notwithstanding its revocation by these Regulations, regulation 3 of the 1994 Regulations continues to have effect for the purposes of Schedule 5 to those Regulations.

6

Notwithstanding the revocation of regulation 12(10) of the 2000 Regulations by these Regulations, any condition implied in a permit by that regulation continues to have effect when the permit becomes an environmental permit.

7

Notwithstanding the revocation of regulation 44 of the End-of-Life Vehicles Regulations 2003 M35 by these Regulations, any modification to a waste management licence made by that regulation continues to have effect when the licence becomes an environmental permit.

8

Notwithstanding the revocation of regulation 5(1) of the Pet Cemeteries (England and Wales) Regulations 2007 by these Regulations, that regulation continues to have effect when a waste management licence to which it applies becomes an environmental permit.

9

Notwithstanding their revocation by these Regulations, the amendments to enactments and other instruments made by the 1994 Regulations and the 2000 Regulations continue to have effect.

10

In this regulation, “determination date”, in relation to a transitional application, has the meaning given in regulation 70(2) or 71(4), as the case may be.

Consequential amendments73

Schedule 21 (consequential amendments) has effect.

Revocations and repeals74

1

The instruments specified in Schedule 22 (revocations) are revoked to the extent specified.

2

The enactments specified in Schedule 23 (repeals) are repealed to the extent specified.

Jane DavidsonMinister for Environment, Sustainability and Housing, one of the Welsh Ministers

Joan RuddockParliamentary Under Secretary of StateDepartment for Environment, Food and Rural Affairs

SCHEDULE 1Activities

Regulations 2(1) and 3

PART 1Interpretation and application: general

Interpretation1

In this Schedule, “background quantity” means, in relation to the release of a substance resulting from an activity, such quantity of that substance as is present in—

a

water supplied to the site where the activity is carried on;

b

water abstracted for use in the activity; and

c

precipitation onto the site on which the activity is carried on.

Activities falling within more than one Part description2

1

Where, in Part 2 of this Schedule, an activity falls within a description in Part A(1) and a description in Part A(2) that activity must be regarded as falling only within that description which fits it most aptly.

2

Where, in Part 2 of this Schedule, an activity falls within a description in Part A(1) and a description in Part B (other than a description in Section 7) that activity must be regarded as falling only within the description in Part A(1).

3

Where, in Part 2 of this Schedule, an activity falls within a description in Part A(2) and a description in Part B (other than a description in Section 7) that activity must be regarded as falling only within the description in Part A(2).

4

If, immediately before the coming into force of these Regulations, an installation where a Part A(2) activity and a waste operation were carried out was a Part A(1) installation by virtue of paragraph 17 of Part 3 of Schedule 1 to the 2000 Regulations, that installation carries on a Part A(1) activity for the purposes of these Regulations.

Application of activities falling within Sections 1.1 to 6.9 of Part 23

An activity must not be taken to be an activity falling within Sections 1.1 to 6.9 of Part 2 if it is—

a

carried on in a working museum to demonstrate an industrial activity of historic interest;

b

carried on for educational purposes in a school as defined in section 4(1) of the Education Act 1996 M36;

c

carried on at an installation or mobile plant solely used for research, development and testing of new products and processes;

d

the running on or within an aircraft, hovercraft, mechanically propelled road vehicle, railway locomotive or ship or other vessel of an engine which propels or provides electricity for it;

e

the running of an engine in order to test it before it is installed or in the course of its development; or

f

carried on as a domestic activity in connection with a private dwelling.

Capacity: Part A(1) and A(2) descriptions4

1

This paragraph applies for the purpose of determining whether an activity carried on in a stationary technical unit falls within a description in Part A(1) or Part A(2) of Part 2 of this Schedule which refers to capacity, other than design holding capacity.

2

Where a person carries out several activities falling within the same description in Part A(1) or Part A(2) in different parts of the same stationary technical unit or in different stationary technical units on the same site, the capacities of each part or unit, as the case may be, must be added together and the total capacity must be attributed to each part or unit for the purpose of determining whether the activity carried on in each part or unit falls within a description in Part A(1) or Part A(2).

3

For the purpose of sub-paragraph (2), no account must be taken of capacity when determining whether activities fall within the same description.

4

Where an activity falls within a description in Part A(1) or Part A(2) by virtue of this paragraph it must not be taken to be an activity falling within a description in Part B (other than a description in Section 7).

Operation below thresholds: effect on the installation5

Where an operator is authorised by an environmental permit to carry out Part A(1) activities, Part A(2) activities or Part B activities which are described in Part 2 of this Schedule by reference to a threshold (whether in terms of capacity or otherwise) at an installation, the installation does not cease to be a Part A(1) installation, a Part A(2) installation, or a Part B installation, as the case may be, by virtue of the installation being operated below the relevant threshold unless the permit ceases to have effect in accordance with these Regulations.

Application of Part B activities: releases into the air6

1

Subject to sub-paragraph (2), an activity must not be taken to be a Part B activity within Part 2 of this Schedule if it cannot result in the release into the air of a substance listed in sub-paragraph (3) or there is no likelihood that it will result in the release into the air of any such substance except in a quantity which is so trivial that it is incapable of causing pollution or its capacity to cause pollution is insignificant.

2

Sub-paragraph (1) does not apply to—

a

an SED activity; or

b

an activity which may give rise to an offensive smell noticeable outside the site where the activity is carried on.

3

References to, or to the release into the air of, a substance listed in this paragraph are to any of the following substances—

a

oxides of sulphur and other sulphur compounds;

b

oxides of nitrogen and other nitrogen compounds;

c

oxides of carbon;

d

organic compounds and partial oxidation products;

e

metals, metalloids and their compounds;

f

asbestos (suspended particulate matter and fibres), glass fibres and mineral fibres;

g

halogens and their compounds;

h

phosphorus and its compounds;

i

particulate matter.

References to releases into water7

References in Part 2 to, or to the release into water of, a substance listed in this paragraph or to its release in a quantity which, in any period of 12 months, is greater than the background quantity by an amount specified in this paragraph are to the following substances and amounts—

Table

Substance	Amount greater than the background quantity (in grammes) in any period of 12 months
Mercury and its compounds	200 (expressed as metal)
Cadmium and its compounds	1,000 (expressed as metal)
All isomers of hexachlorocyclohexane	20
All isomers of DDT	5
Pentachlorophenol and its compounds	350 (expressed as PCP)
Hexachlorobenzene	5
Hexachlorobutadiene	20
Aldrin	2
Dieldrin	2
Endrin	1
Polychlorinated Biphenyls	1
Dichlorvos	0.2
1, 2—Dichloroethane	2,000
All isomers of trichlorobenzene	75
Atrazine	350¹
Simazine	350¹
Tributyltin compounds	4 (expressed as TBT)
Triphenyltin compounds	4 (expressed as TPT)
Trifluralin	20
Fenitrothion	2
Azinphos-methyl	2
Malathion	2
Endosulfan	0.5
¹ Where both Altrazine and Simazine are released, the figure for both substances in aggregate is 350 grammes.

References to certain substances8

1

References in Part 2 to a substance listed in this paragraph are to any of the following substances—

a

alkali metals and their oxides and alkaline earth metals and their oxides;

b

organic solvents;

c

azides;

d

halogens and their covalent compounds;

e

metal carbonyls;

f

organo-metallic compounds;

g

oxidising agents;

h

polychlorinated dibenzofuran and any congener thereof;

i

polychlorinated dibenzo-p-dioxin and any congener thereof;

j

polyhalogenated biphenyls, terphenyls and naphthalenes;

k

phosphorus;

l

pesticides.

2

In this paragraph, “pesticide” means any chemical substance or preparation prepared or used for destroying any pest, including those used for—

a

protecting plants or wood or other plant products from harmful organisms;

b

regulating the growth of plants;

c

giving protection against harmful creatures or rendering such creatures harmless;

d

controlling organisms with harmful or unwanted effects on water systems, buildings or other structures, or on manufactured products; or

e

protecting animals against ectoparasites.

PART 2Activities

CHAPTER 1Energy activities

SECTION 1.1Combustion activities

Interpretation of Section 1.1

1

In this Section “recovered oil” means waste oil which has been processed before being used.

Part A(1)

a

Burning any fuel in an appliance with a rated thermal input of 50 or more megawatts.

b

Unless carried on as part of a Part A(2) or Part B activity, burning any—

i

waste oil;

ii

recovered oil; or

iii

fuel manufactured from, or comprising, any other waste,

in an appliance with a rated thermal input of 3 or more megawatts, but less than 50 megawatts.

Interpretation and application of Part A(1)

1

For the purpose of paragraph (a), where two or more appliances with an aggregate rated thermal input of 50 megawatts or more are operated on the same site by the same operator those appliances must be treated as a single appliance with a rated thermal input of 50 megawatts or more.

2

Nothing in this Part of this Section applies to burning fuels in an appliance installed on an offshore platform situated on, above or below those parts of the sea adjacent to England and Wales from the low water mark to the seaward baseline of the United Kingdom territorial sea.

3

In paragraph 2, “offshore platform” means any fixed or floating structure which—

a

is used for the purposes of or in connection with the production of petroleum; and

b

in the case of a floating structure, is maintained on a station during the course of production,

but does not include any structure where the principal purpose of the use of the structure is the establishment of the existence of petroleum or the appraisal of its characteristics, quality or quantity or the extent of any reservoir in which it occurs.

4

In paragraph 3, “petroleum” includes any mineral oil or relative hydrocarbon and natural gas existing in its natural condition in strata but does not include coal or bituminous shales or other stratified deposits from which oil can be extracted by destructive distillation.

5

In paragraph (b)(iii), “fuel” does not include gas produced by biological degradation of waste in a landfill that does not require a permit under these Regulations.

Part B

Unless falling within Part A(1)(a) of this Section—

a

Burning any fuel (other than a fuel mentioned in Part A(1)(b)) in—

i

a boiler;

ii

a furnace;

iii

a gas turbine; or

iv

a compression ignition engine,

with a net rated thermal input of 20 or more megawatts, but a rated thermal input of less than 50 megawatts.

b

Burning any—

i

waste oil;

ii

recovered oil;

iii

solid fuel which has been manufactured from waste by an activity involving the application of heat,

in an appliance with a rated thermal input of less than 3 megawatts.

c

Burning fuel manufactured from or including waste (other than a fuel mentioned in paragraph (b)) in any appliance with a net rated thermal input of 0.4 or more megawatts, but a rated thermal input of less than 3 megawatts—

i

which is used together with other appliances which each have a rated thermal input of less than 3 megawatts; and

ii

where the aggregate net rated thermal input of all the appliances is at least 0.4 megawatts.

lignite;

iii

oil;

iv

other carbonaceous material; or

v

mixtures thereof,otherwise than with a view to making charcoal.

k

Odorising natural gas or liquefied petroleum gas where that activity is related to a Part A activity.

Interpretation and application of Part A(1)

1

Paragraph (j) does not include—

a

the use of any substance as a fuel;

b

the incineration of any substance as a waste;

c

any activity for the treatment of sewage or sewage sludge.

2

In paragraph (j), the heat treatment of oil, other than distillation, does not include the heat treatment of waste oil or waste emulsions containing oil in order to recover the oil from aqueous emulsions.

3

In this Part, “carbonaceous material” includes such materials as charcoal, coke, peat, rubber and wood, but does not include wood which has not been chemically treated.

Part A(2)

a

Refining gas where this activity does not fall within Part A(1)(a) of this Section.

Part B

a

Odorising natural gas or liquefied petroleum gas, except where that activity is related to a Part A activity.

b

Blending odorant for use with natural gas or liquefied petroleum gas.

c

The storage of petrol in stationary storage tanks at a terminal, or the loading or unloading at a terminal of petrol into or from road tankers, rail tankers or inland waterway vessels.

d

The unloading of petrol into stationary storage tanks at a service station, if the total quantity of petrol unloaded into such tanks at the service station in any period of 12 months is likely to be 500m3 or more.

e

Motor vehicle refuelling activities at an existing service station after the prescribed date, if the petrol refuelling throughput at the existing service station in any period of 12 months is, or is likely to be, 3500m3 or more.

f

Motor vehicle refuelling activities at new service stations, if the petrol refuelling throughput at the service station in any period of 12 months is likely to be 500m3 or more.

Interpretation of Part B

1

In this Part—

“existing service station” means a service station—
1. a
  which is put into operation; or
2. b
  for which planning permission under the Town and Country Planning Act 1990 M37 was granted,
before 31st December 2009;
“inland waterway vessel” means a vessel, other than a sea-going vessel, having a total dead weight of 15 or more tonnes;
“new service station” means a service station which is put into operation on or after 31st December 2009, other than an existing service station;
“petrol” means any petroleum derivative (other than liquefied petroleum gas), with or without additives, having a Reid vapour pressure of 27.6 or more kilopascals, which is intended for use as a fuel for motor vehicles;
“prescribed date” means—
1. a
  if an application for the grant or variation of an environmental permit is made on or before 1st January 2010—
  1. i
    if the application is granted, the date of grant,
  2. ii
    if the application is refused and the applicant appeals against the refusal, the date of the appeal determination or the date the appeal is withdrawn, or
  3. iii
    if the application is refused, and the applicant does not appeal against the refusal, the day after the last day on which an appeal could have been brought; or
2. b
  if no such application is made, 1st January 2010;
“service station” means any premises where petrol is dispensed to motor vehicle fuel tanks from stationary storage tanks;
“terminal” means any premises which are used for the storage and loading of petrol into road tankers, rail tankers or inland waterway vessels.

2

Any other expressions used in this Part which are also used in Directive 94/63/EC on the control of volatile organic compound (VOC) emissions resulting from the storage of petrol and its distribution from terminals to service stations M38 have the same meaning as in that Directive.

CHAPTER 2Production and Processing of Metals

SECTION 2.1Ferrous Metals

Interpretation of Section 2.1

1

In this Section, “ferrous alloy” means an alloy of which iron is the largest constituent, or equal to the largest constituent, by weight, whether or not that alloy also has a non-ferrous metal content greater than any percentage specified in Section 2.2.

Part A(1)

a

Roasting or sintering metal ore, including sulphide ore, or any mixture of iron ore with or without other materials.

b

Producing, melting or refining iron or steel or any ferrous alloy, including continuous casting, except where the only furnaces used are—

i

electric arc furnaces with a designed holding capacity of less than 7 tonnes, or

ii

cupola, crucible, reverbatory, rotary, induction, vacuum, electro-slag or resistance furnaces.

c

Processing ferrous metals and their alloys by using hot-rolling mills with a production capacity of more than 20 tonnes of crude steel per hour.

d

Loading, unloading or otherwise handling or storing more than 500,000 tonnes in total in any period of 12 months of iron ore, except in the course of mining operations, or burnt pyrites.

Part A(2)

a

Unless falling within Part A(1)(b) of this Section producing pig iron or steel, including continuous casting, in a plant with a production capacity of more than 2.5 tonnes per hour.

b

Operating hammers in a forge, the energy of which is more than 50 kilojoules per hammer, where the calorific power used is more than 20 megawatts.

c

Applying protective fused metal coatings with an input of more than 2 tonnes of crude steel per hour.

d

Casting ferrous metal at a foundry with a production capacity of more than 20 tonnes per day.

Part B

a

Unless falling within Part A(1)(b) of this Section, producing pig iron or steel, including continuous casting, in a plant with a production capacity of 2.5 or less tonnes per hour.

b

Unless falling within Part A(2)(a) or (d) of this Section, producing, melting or refining iron or steel or any ferrous alloy (other than producing pig iron or steel, including continuous casting) using—

i

one or more electric arc furnaces, none of which has a designed holding capacity of 7 or more tonnes; or

ii

a cupola, crucible, reverberatory, rotary, induction, electro-slag or resistance furnace.

c

Desulphurising iron, steel or any ferrous alloy.

d

Heating iron, steel or any ferrous alloy (whether in a furnace or other appliance) to remove grease, oil or any other non-metallic contaminant (including such operations as the removal by heat of plastic or rubber covering from scrap cable) unless—

i

it is carried on in one or more furnaces or other appliances the primary combustion chambers of which have in aggregate a rated thermal input of less than 0.2 megawatts;

ii

it does not involve the removal by heat of plastic or rubber covering from scrap cable or of any asbestos contaminant; and

iii

it is not related to any other activity falling within this Part of this Section.

e

Unless falling within Part A(1) or Part A(2) of this Section, casting iron, steel or any ferrous alloy from deliveries of 50 or more tonnes of molten metal.

SECTION 2.2Non-Ferrous Metals

Interpretation and application of Section 2.2

1

In this Section “non-ferrous metal alloy” means an alloy which is not a ferrous alloy, as defined in Section 2.1.

2

Part A(1)(c) to (h) and Part B do not apply to hand soldering, flow soldering or wave soldering.

Part A(1)

a

Unless falling within Part A(2) of this Section, producing non-ferrous metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic activities.

b

Melting, including making alloys, of non-ferrous metals, including recovered products (refining, foundry casting etc) where—

i

the plant has a melting capacity of more than 4 tonnes per day for lead or cadmium or 20 tonnes per day for all other metals; and

ii

any furnace (other than a vacuum furnace), bath or other holding vessel used in the plant for the melting has a design holding capacity of 5 or more tonnes.

c

Except where the activity is related to an activity described in Part A(2)(a), or Part B(a), (d) or (e) of this Section, refining any non-ferrous metal or alloy, other than the electrolytic refining of copper.

d

Producing, melting or recovering by chemical means or by the use of heat, lead or any lead alloy, if—

i

the activity may result in the release into the air of lead; and

ii

in the case of lead alloy, the percentage by weight of lead in the alloy in molten form is more than 23 per cent if the alloy contains copper and 2 per cent in other cases.

e

Recovering any gallium, indium, palladium, tellurium, or thallium if the activity may result in their release into the air.

f

Producing, melting or recovering (whether by chemical means or by electrolysis or by the use of heat) cadmium or mercury or any alloy containing more than 0.05 per cent by weight of either of those metals or both in aggregate.

g

Mining zinc or tin bearing ores where the activity may result in the release into water of cadmium or any compound of cadmium in a concentration which is greater than the background concentration.

h

Manufacturing or repairing involving the use of beryllium or selenium or an alloy containing one or both of those metals, if the activity may result in the release into the air of any substance in paragraph 6(3) of Part 1; but an activity does not fall within this paragraph by reason of it involving an alloy that contains beryllium if that alloy in molten form contains less than 0.1 per cent by weight of beryllium and the activity falls within Part B(a) or (d) of this Section.

i

Pelletising, calcining, roasting or sintering any non-ferrous metal ore or any mixture of such ore and other materials.

Interpretation of Part A(1)

1

ii

it does not involve the removal by heat of plastic or rubber covering from scrap cable or of any asbestos contaminant.

c

Melting zinc or a zinc alloy in conjunction with a galvanising activity at a rate of 20 or less tonnes per day.

d

Melting zinc, aluminium or magnesium or an alloy of one or more of these metals in conjunction with a die-casting activity at a rate of 20 or less tonnes per day.

e

Unless falling within Part A(1) or Part A(2) of this Section, the separation of copper, aluminium, magnesium or zinc from mixed scrap by differential melting.

Interpretation and application of Part B

1

In this Part “net rated thermal input” is the rate at which fuel can be burned at the maximum continuous rating of the appliance multiplied by the net calorific value of the fuel and expressed as megawatts thermal.

2

When determining the extent of an installation carrying on an activity within paragraph (e), any location where the associated storage or handling of scrap which is to be heated as part of that activity is carried on, other than a location where scrap is loaded into a furnace, must be ignored.

SECTION 2.3Surface Treating Metals and Plastic Materials

Part A(1)

a

Unless falling within Part A(2) of this Section, surface treating metals and plastic materials using an electrolytic or chemical process where the aggregated volume of the treatment vats is more than 30m3.

Part A(2)

a

Surface treating metals and plastic materials using an electrolytic or chemical process where the aggregated volume of the treatment vats is more than 30m3 and where the activity is carried on at the same installation as one or more activities falling within—

i

Part A(2) or Part B of Section 2.1;

ii

Part A(2) or Part B of Section 2.2; or

iii

Part A(2) or Part B of Section 6.4.

Part B

a

Any process for the surface treatment of metal which is likely to result in the release into air of any acid-forming oxide of nitrogen and which does not fall within Part A(1) or Part A(2) of this Section.

CHAPTER 3Mineral Industries

SECTION 3.1Production of Cement and Lime

Part A(1)

a

Producing cement clinker or producing and grinding cement clinker.

b

Producing lime—

i

in kilns or other furnaces with a production capacity of more than 50 tonnes per day; or

ii

if the activity is likely to involve the heating in any period of 12 months of 5,000 or more tonnes of calcium carbonate or calcium magnesium carbonate or both in aggregate.

asbestos fillers;

iv

asbestos filters;

v

asbestos floor coverings;

vi

asbestos friction products;

vii

asbestos insulating board;

viii

asbestos jointing, packaging and reinforcement material;

ix

asbestos packing;

x

asbestos paper or card; or

xi

asbestos textiles.

SECTION 3.3Manufacturing Glass and Glass Fibre

Part A(1)

a

Manufacturing glass fibre.

b

Manufacturing glass frit or enamel frit and its use in any activity where that activity is related to its manufacture and the aggregate quantity of such substances manufactured in any period of 12 months is likely to be 100 or more tonnes.

Manufacturing cellulose fibre reinforced calcium silicate board using unbleached pulp.

Part B

a

Unless falling within Part A(1) or Part A(2) of any Section, the crushing, grinding or other size reduction, other than the cutting of stone, or the grading, screening or heating of any designated mineral or mineral product except where the operation of the activity is unlikely to result in the release into the air of particulate matter.

b

Any of the following activities unless carried on at an exempt location—

i

crushing, grinding or otherwise breaking up coal, coke or any other coal product;

ii

screening, grading or mixing coal, coke or any other coal product;

iii

loading or unloading petroleum coke, coal, coke or any other coal product except unloading on retail sale.

c

The crushing, grinding or other size reduction, with machinery designed for that purpose, of bricks, tiles or concrete.

d

Screening the product of any activity described in paragraph (c).

e

Coating road stone with tar or bitumen.

f

Loading, unloading, or storing pulverised fuel ash in bulk prior to further transportation in bulk.

g

The fusion of calcined bauxite for the production of artificial corundum.

Interpretation and application of Part B1

In this Part—

“coal” includes lignite;
“designated mineral or mineral product” means—
1. a
  clay, sand and any other naturally occurring mineral other than coal;
2. b
  metallurgical slag;
3. c
  boiler or furnace ash produced from the burning of coal, coke or any other coal product;
4. d
  gypsum which is a by-product of any activity;
“exempt location” means—
1. a
  any premises used for the sale of petroleum coke, coal, coke or any coal product where the throughput of such substances at those premises in any period of 12 months is in aggregate likely to be less than 10,000 tonnes; or
2. b
  any premises to which petroleum coke, coal, coke or any coal product is supplied only for use there;
“retail sale” means sale to the final customer.

2

This Part does not apply to any activity carried on underground.

SECTION 3.6Ceramic Production

Part A(1)

a

Manufacturing ceramic products (including roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain) by firing in kilns, where—

i

the kiln production capacity is more than 75 tonnes per day; or

ii

the kiln capacity is more than 4m3 and the setting density is more than 300 kg/m3,

and a reducing atmosphere is used other than for the purposes of colouration.

Part A(2)

a

Unless falling within Part A(1) of this Section, manufacturing ceramic products (including roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain) by firing in kilns, where—

i

the kiln production capacity is more than 75 tonnes per day; or

ii

the kiln capacity is more than 4m3 and the setting density is more than 300 kg/m3.

Part B

a

Unless falling within Part A(1) or A(2) of this Section, firing heavy clay goods or refractory materials (other than heavy clay goods) in a kiln.

b

Vapour glazing earthenware or clay with salts.

Interpretation of Part B

1

In this Part—

“clay” includes a blend of clay with ash, sand or other materials;
“refractory material” means material (such as fireclay, silica, magnesite, chrome-magnesite, sillimanite, sintered alumina, beryllia and boron nitride) which is able to withstand high temperatures and to function as a furnace lining or in other similar high temperature applications.

CHAPTER 4 The Chemical Industry

Interpretation of Chapter 4

1

In Part A(1) of the Sections of this Chapter, “producing” means producing in a chemical plant by chemical processing for commercial purposes substances or groups of substances listed in the relevant Sections.

SECTION 4.1Organic Chemicals

Interpretation of Section 4.1

1

In this Section, “pre-formulated resin or pre-formulated gel coat” means any resin or gel coat which has been formulated before being introduced into polymerisation or co-polymerisation activity, whether or not the resin or gel coat contains a colour pigment, activator or catalyst.

Part A(1)

a

Producing organic chemicals such as—

i

hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic);

ii

organic compounds containing oxygen, such as alcohols, aldehydes, ketones, carboxylic acids, esters, ethers, peroxides, phenols, epoxy resins;

iii

organic compounds containing sulphur, such as sulphides, mercaptans, sulphonic acids, sulphonates, sulphates and sulphones and sulphur heterocyclics;

iv

organic compounds containing nitrogen, such as amines, amides, nitrous-, nitro- or azo-compounds, nitrates, nitriles, nitrogen heterocyclics, cyanates, isocyanates, di-isocyanates and di-isocyanate prepolymers;

v

organic compounds containing phosphorus, such as substituted phosphines and phosphate esters;

vi

organic compounds containing halogens, such as halocarbons, halogenated aromatic compounds and acid halides;

vii

organometallic compounds, such as lead alkyls, Grignard reagents and lithium alkyls;

viii

plastic materials, such as polymers, synthetic fibres and cellulose-based fibres;

ix

synthetic rubbers;

x

dyes and pigments;

xi

surface-active agents.

b

Producing any other organic compounds not described in paragraph (a).

c

Polymerising or co-polymerising any unsaturated hydrocarbon or vinyl chloride (other than a pre-formulated resin or pre-formulated gel coat which contains any unsaturated hydrocarbon) which is likely to involve, in any period of 12 months, the polymerisation or co-polymerisation of 50 or more tonnes of any of those materials, or any combination of those materials in aggregate.

d

Any activity involving the use in any period of 12 months of 1 or more tonnes of toluene di-isocyanate or other di-isocyanate of comparable volatility or, where partly polymerised, the use of partly polymerised di-isocyanates or prepolymers containing 1 or more tonnes of those monomers, if the activity may result in a release into the air which contains such a di-isocyanate monomer.

e

The flame bonding of polyurethane foams or polyurethane elastomers.

f

Recovering—

i

carbon disulphide;

ii

pyridine or any substituted pyridine.

g

Recovering or purifying acrylic acid, substituted acrylic acid or any ester of acrylic acid or of substituted acrylic acid.

Part B

a

Unless falling within Part A(1) of this Section, any activity where the carrying on of the activity by the person concerned at the location in question is likely to involve the use in any 12 month period of 5 tonnes or more of any di-isocyanate or of any partly polymerised di-isocyanate or, in aggregate, of both.

b

Cutting polyurethane foams or polyurethane elastomers with heated wires.

c

Any activity for the polymerisation or co-polymerisation of any pre-formulated resin or pre-formulated gel coat which contains any unsaturated hydrocarbon, where the activity is likely to involve, in any period of 12 months, the polymerisation or co-polymerisation of 100 or more tonnes of unsaturated hydrocarbon.

d

Unless falling within Part A(1) of this Section, any activity involving the use of toluene di-isocyanate or partly polymerised di-isocyanate if—

i

less than 1 tonne of toluene di-isocyanate monomer is likely to be used in any 12 month period; and

ii

the activity may result in a release into the air which contains toluene di-isocyanate.

SECTION 4.2Inorganic Chemicals

Part A(1)

a

Producing inorganic chemicals such as—

i

gases, such as ammonia, hydrogen chloride, hydrogen fluoride, hydrogen cyanide, hydrogen sulphide, oxides of carbon, sulphur compounds, oxides of nitrogen, hydrogen, oxides of sulphur, phosgene;

ii

acids, such as chromic acid, hydrofluoric acid, hydrochloric acid, hydrobromic acid, hydroiodic acid, phosphoric acid, nitric acid, sulphuric acid, oleum and chlorosulphonic acid;

iii

bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide;

iv

salts, such as ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate, cupric acetate, ammonium phosphomolybdate;

v

non-metals, metal oxides, metal carbonyls or other inorganic compounds such as calcium carbide, silicon, silicon carbide, titanium dioxide;

vi

halogens or interhalogen compound comprising two or more of halogens, or any compound comprising one or more of those halogens and oxygen.

b

Unless falling within any other Section, any manufacturing activity which is likely to result in the release into the air of any hydrogen halide (other than the manufacture of glass or the coating, plating or surface treatment of metal) or which is likely to result in the release into the air or water of any halogen or any of the compounds mentioned in paragraph (a)(vi) (other than the treatment of water).

c

Unless falling within any other Section, any manufacturing activity involving the use of hydrogen cyanide or hydrogen sulphide.

d

Unless falling within any other Section, any manufacturing activity (other than the application of a glaze or vitreous enamel) involving the use of, or the use or recovery of, any compound of any of the following elements—

i

antimony;

ii

arsenic;

iii

beryllium;

iv

gallium;

v

indium;

vi

lead;

vii

palladium;

viii

platinum;

ix

selenium;

x

tellurium;

xi

thallium,

where the activity may result in the release into the air of any of those elements or compounds or the release into water of any substance listed in paragraph 7 of Part 1.

e

Recovering any compound of cadmium or mercury.

f

Unless falling within any other Section, any manufacturing activity involving the use of mercury or cadmium or any compound of either element or which may result in the release into air of either of those elements or their compounds.

g

Unless carried on as part of any other activity within this Schedule—

i

recovering, concentrating or distilling sulphuric acid or oleum;

ii

recovering nitric acid;

iii

purifying phosphoric acid.

h

Unless falling within any other Section, any activity (other than the combustion or incineration of carbonaceous material as defined in the Interpretation of Part A(1) of Section 1.2) which is likely to result in the release into the air of any acid-forming oxide of nitrogen.

i

Unless carried on as part of any other activity within this Schedule, recovering ammonia.

b

SECTION 4.6Explosives Production

Part A(1)

a

Producing explosives.

SECTION 4.7Manufacturing Activities Involving Carbon Disulphide or Ammonia

Part A(1)

a

Unless falling within Part A(2) of Section 6.7, any manufacturing activity which may result in the release of carbon disulphide into the air.

b

Any activity for the manufacture of a chemical which may result in the release of ammonia into the air other than an activity in which ammonia is only used as a refrigerant.

SECTION 4.8The Storage of Chemicals in Bulk

Part B

a

The storage in tanks, other than in tanks for the time being forming part of a powered vehicle, of any of the substances listed below except where the total storage capacity of the tanks installed at the location in question in which the relevant substance may be stored is less than the figure specified below in relation to that substance—

i

one or more acrylates, 20 tonnes (in aggregate);

ii

acrylonitrile, 20 tonnes;

iii

anhydrous ammonia, 100 tonnes;

iv

anhydrous hydrogen fluoride, 1 tonne;

v

toluene di-isocyanate, 20 tonnes;

vi

vinyl chloride monomer, 20 tonnes;

vii

ethylene, 8,000 tonnes.

CHAPTER 5Waste Management

SECTION 5.1Incineration and Co-incineration of Waste

Interpretation of Section 5.1

1

In this Section—

“co-incineration” means the use of wastes as a regular or additional fuel in a co-incineration plant or the thermal treatment of waste for the purpose of disposal in a co-incineration plant;
“co-incineration plant” means any stationary or mobile plant whose main purpose is the generation of energy or production of material products, and—
1. a
  which uses wastes as a regular or additional fuel; or
2. b
  in which waste is thermally treated for the purpose of disposal.
If co-incineration takes place in such a way that the main purpose of the plant is not the generation of energy or production of material products but rather the thermal treatment of waste, the plant must be regarded as an incineration plant.
This definition covers the site and the entire plant including all co-incineration lines, waste reception, storage, on site pre-treatment facilities, waste-, fuel- and air-supply systems, boiler, facilities for the treatment of exhaust gases, on-site facilities for treatment or storage of residues and waste water, stack devices and systems for controlling incineration operations, recording and monitoring incineration conditions, but does not cover co-incineration in an excluded plant;
“excluded plant” means—
1. a
  a plant treating only the following wastes—
  1. i
    vegetable waste from agriculture and forestry,
  2. ii
    vegetable waste from the food processing industry, if the heat generated is recovered,
  3. iii
    fibrous vegetable waste from virgin pulp production and from production of paper from pulp, if it is co-incinerated at the place of production and the heat generated is recovered,
  4. iv
    wood waste with the exception of wood waste which may contain halogenated organic compounds or heavy metals as a result of treatment with wood-preservatives or coating, and which includes in particular such wood waste originating from construction and demolition waste,
  5. v
    cork waste,
  6. vi
    radioactive waste,
  7. vii
    animal carcasses as regulated by Regulation (EC) No 1774/2002 of the European Parliament and of the Council of 3 October 2002 laying down health rules concerning animal by-products not intended for human consumption M39, or
  8. viii
    waste resulting from the exploration for, and the exploitation of, oil and gas resources from off-shore installations and incinerated on board the installation; and
2. b
  an experimental plant used for research, development and testing in order to improve the incineration process and which treats less than 50 tonnes of waste per year;
“hazardous waste” means any solid or liquid waste as defined in regulation 6 of (in relation to England) the Hazardous Waste (England and Wales) Regulations 2005 M40 or (in relation to Wales) the Hazardous Waste (Wales) Regulations 2005 M41 except for—
1. a
  combustible liquid wastes including waste oils provided that they meet the following criteria—
  1. i
    the mass content of polychlorinated aromatic hydrocarbons, for example polychlorinated biphenyls or pentachlorinated phenol, amounts to concentrations not higher than those set out in the relevant Community legislation,
  2. ii
    these wastes are not rendered hazardous by virtue of containing other constituents listed in Schedule 2 to (in relation to England) the Hazardous Waste (England and Wales) Regulations 2005, or (in relation to Wales) the Hazardous Waste (Wales) Regulations 2005 in quantities or in concentrations which are inconsistent with the achievement of the objectives set out in Article 4 of the Waste Framework Directive, and
  3. iii
    the net calorific value amounts to at least 30 MJ per kilogramme;
2. b
  any combustible liquid wastes which cannot cause, in the flue gas directly resulting from their combustion, emissions other than those from gasoil as defined in Article 1(1) of Council Directive 93/12/EEC relating to the sulphur content of certain liquid fuels M42 or a higher concentration of emissions than those resulting from the combustion of gasoil as so defined;
“incineration plant” means any stationary or mobile technical unit and equipment dedicated to the thermal treatment of wastes with or without recovery of the combustion heat generated, including—
1. a
  the incineration by oxidation of waste; and
2. b
  other thermal treatment processes such as pyrolysis, gasification or plasma processes in so far as the substances resulting from the treatment are subsequently incinerated.
This definition covers the site and the entire incineration plant including all incineration lines, waste reception, storage, on site pre-treatment facilities, waste-fuel and air-supply systems, boiler, facilities for the treatment of exhaust gases, on-site facilities for treatment or storage of residues and waste water, stack, devices and systems for controlling incineration operations recording and monitoring incineration conditions, but does not cover incineration in an excluded plant;
“non-hazardous waste” means waste which is not hazardous waste;
“waste” means any solid or liquid waste as defined in Article 1(a) of the Waste Framework Directive.

Part A(1)

a

The incineration of hazardous waste in an incineration plant.

b

Unless carried on as part of any other Part A(1) activity, the incineration of hazardous waste in a co-incineration plant.

c

The incineration of non-hazardous waste in an incineration plant with a capacity of 1 tonne or more per hour.

d

Unless carried on as part of any other activity in this Part, the incineration of hazardous waste in a plant which is not an incineration plant or a co-incineration plant.

e

Unless carried on as part of any other activity in this Part, the incineration of non-hazardous waste in a plant which is not an incineration plant or a co-incineration plant but which has a capacity of 1 tonne or more per hour.

f

The incineration, other than incidentally in the course of burning landfill gas or solid or liquid waste, of any gaseous compound containing halogens in a plant which is not an incineration plant or a co-incineration plant.

Part A(2)

a

The incineration of non-hazardous waste in an incineration plant with a capacity of less than 1 tonne per hour.

b

Unless carried on as part of any other Part A activity, the incineration of non-hazardous waste in a co-incineration plant.

c

The incineration of animal carcasses in a plant, which is not an incineration plant or a co-incineration plant, with a capacity of more than 10 tonnes per day but less than 1 tonne per hour.

Part B

a

The incineration of non-hazardous waste in a plant which is—

i

not an incineration plant or a co-incineration plant, and

ii

on premises where there is plant, other than incineration plant or co-incineration plant, which has an aggregate capacity of 50 kilogrammes or more per hour but less than 1 tonne per hour.

b

The cremation of human remains.

Application of Part B

1

When determining the extent of an installation carrying on an activity within Part B, any location of the following description must be ignored: any location where the associated storage or handling of wastes and residues which are to be incinerated as part of that activity is carried on, other than a location where the associated storage or handling of animal remains intended for burning in an incinerator used wholly or mainly for the incineration of such remains or residues from the burning of such remains in such an incinerator is carried on.

SECTION 5.2Disposal of Waste by Landfill

Part A(1)

a

The disposal of waste in a landfill—

i

receiving more than 10 tonnes of waste in any day, or

ii

with a total capacity of more than 25,000 tonnes,

but excluding disposals in a landfill taking only inert waste.

SECTION 5.3Disposal of Waste Other Than by Incineration or Landfill

Part A(1)

a

c

Unless carried on as part of any other Part A activity, recovering hazardous waste in a plant with a capacity of more than 10 tonnes per day by means of the following operations—

i

the use principally as a fuel or other means to generate energy (R1),

ii

solvent reclamation/regeneration (R2),

iii

recycling/reclamation of inorganic materials other than metals and metal compounds (R5),

iv

regeneration of acids or bases (R6),

v

recovering components used for pollution abatement (R7),

vi

recovery of components from catalysts (R8),

vii

oil re-refining or other reuses of oil (R9).

Interpretation and application of Part A(1)

1

Paragraphs (a) and (b) of this Part do not apply to—

a

distilling oil for the production or cleaning of vacuum pump oil; or

b

an activity which is ancillary to and related to another activity, whether described in this Schedule or not, which involves the production or use of the substance which is recovered, cleaned or regenerated,

except where the activity involves distilling more than 100 tonnes per day.

2

This Part does not apply to the treatment of—

a

waste soil; or

b

contaminated material, substances or products, for the purpose of remedial action with respect to land or controlled waters, as defined in section 104 of the Water Resources Act 1991,

by means of mobile plant.

3

The reference to an R paragraph number in brackets at the end of paragraphs (c)(i) to (vii) is to the number of the corresponding paragraph in Annex IIB of the Waste Framework Directive (recovery operations).

SECTION 5.5The Production of Fuel from Waste

Part A(1)

a

Making solid fuel (other than charcoal) from waste by any process involving the use of heat.

CHAPTER 6Other Activities

SECTION 6.1Paper, Pulp and Board Manufacturing Activities

Part A(1)

a

Producing, in industrial plant, pulp from timber or other fibrous materials.

b

Producing, in industrial plant, paper and board where the plant has a production capacity of more than 20 tonnes per day.

c

Any activity associated with making paper pulp or paper, including activities connected with the recycling of paper such as de-inking, if the activity may result in the release into water of any substance in paragraph 7 of Part 1 in a quantity which, in any period of 12 months, is greater than the background quantity by more than the amount specified in that paragraph in relation to that substance.

Interpretation of Part A(1)

1

i

distilling tar or bitumen in connection with any process of manufacture, or

ii

heating tar for the manufacture of electrodes or carbon-based refractory materials,

where the activity is likely to involve the use in any period of 12 months of 5 or more tonnes of tar or of bitumen or both in aggregate.

Part B

a

Any activity not falling within Part A(1) of this Section or of Section 6.2 involving—

i

heating, but not distilling, tar or bitumen in connection with any manufacturing activity, or

ii

oxidising bitumen by blowing air through it, at plant where no other activities described in any Section in this Schedule are carried on,

where the carrying on of the activity is likely to involve the use in any period of 12 months of 5 or more tonnes of tar or bitumen or both in aggregate.

Interpretation of Part B

1

In this Part “tar” and “bitumen” include pitch.

SECTION 6.4Coating Activities, Printing and Textile Treatments

Part A(1)

a

Applying or removing a coating material containing any tributyltin compound or triphenyltin compound, if carried on at a shipyard or boatyard where vessels of a length of 25 metres or more can be built, maintained or repaired.

b

Pre-treating (by operations such as washing, bleaching or mercerization) or dyeing fibres or textiles in plant with a treatment capacity of more than 10 tonnes per day.

c

Treating textiles if the activity may result in the release into water of any substance in paragraph 7 of Part 1 in a quantity which, in any period of 12 months, is greater than the background quantity by more than the amount specified in that paragraph in relation to that substance.

Part A(2)

a

Unless falling within Part A(1) of this Section, surface treating substances, objects or products using organic solvents, in particular for dressing, printing, coating, degreasing, waterproofing, sizing, painting, cleaning or impregnating, in plant with a consumption capacity of more than 150 kg per hour or more than 200 tonnes per year.

Part B

a

Unless falling within Part A(1) or Part A(2) of this Section or Part A(2)(c) of Section 2.1, any process (other than for the repainting or re-spraying of or of parts of aircraft or road or railway vehicles) for applying to a substrate, or drying or curing after such application, printing ink or paint or any other coating material as, or in the course of, a manufacturing activity, where the process may result in the release into the air of particulate matter or of any volatile organic compound and is likely to involve the use in any period of 12 months of—

i

20 or more tonnes of printing ink, paint or other coating material which is applied in solid form,

ii

20 or more tonnes of any metal coating which is sprayed on in molten form,

iii

25 or more tonnes of organic solvents in respect of any cold set web offset printing activity or any sheet fed offset litho printing activity, or

iv

5 or more tonnes of organic solvents in respect of any activity not mentioned in sub-paragraph (iii).

b

Unless falling within Part A(2) of this Section, repainting or re-spraying road vehicles or parts of them if the activity may result in the release into the air of particulate matter or of any volatile organic compound and the carrying on of the activity is likely to involve the use of 1 or more tonne of organic solvents in any period of 12 months.

c

Repainting or re-spraying aircraft or railway vehicles or parts of them if the activity may result in the release into the air of particulate matter or of any volatile organic compound and the carrying on of the activity is likely to involve the use in any period of 12 months of—

i

20 or more tonnes of any paint or other coating material which is applied in solid form,

ii

20 or more tonnes of any metal coatings which are sprayed on in molten form, or

iii

5 or more tonnes of organic solvents.

Interpretation and application of Part B

1

In this Part—

“aircraft” includes gliders and missiles;
“coating material” means paint, printing ink, varnish, lacquer, dye, any metal oxide coating, any adhesive coating, any elastomer coating, any metal or plastic coating and any other coating material.

2

The amount of organic solvents used in an activity must be calculated as—

a

the total input of organic solvents into the process, including both solvents contained in coating materials and solvents used for cleaning or other purposes; less

b

any organic solvents that are removed from the process for re-use or for recovery for re-use.

3

When determining the extent of an installation carrying on an activity within Part B any location where the associated cleaning of used storage drums prior to painting or their incidental handling in connection with such cleaning is carried on must be ignored, unless that location forms part of an SED installation.

SECTION 6.5The Manufacture of Dyestuffs, Printing Ink and Coating Materials

Part B

a

Unless falling within Part A(1) or Part A(2) of any other Section—

i

manufacturing or formulating printing ink or any other coating material containing, or involving the use of, an organic solvent, where the carrying on of the activity is likely to involve the use of 100 or more tonnes of organic solvents in any period of 12 months,

ii

manufacturing any powder for use as a coating material where there is the capacity to produce 200 tonnes or more of such powder in any period of 12 months.

Interpretation of Part B

1

In this Part, “coating material” has the same meaning as in Section 6.4.

2

The amount of organic solvents used in an activity must be calculated as—

a

the total input of organic solvents into the process, including both solvents contained in coating materials and solvents for cleaning or other purposes; less

b

any organic solvents, not contained in coating materials, that are removed from the process for re-use or for recovery for re-use.

SECTION 6.6Timber Activities

Part A(1)

a

Curing, or chemically treating, as part of a manufacturing process, timber or products wholly or mainly made of wood if any substance in paragraph 7 of Part 1 is used.

Part B

a

Unless falling within Part A(2) of Section 6.1, manufacturing products wholly or mainly of wood at any works if the activity involves a relevant activity and the throughput of the works in any period of 12 months is likely to be more than—

i

10,000 cubic metres in the case of works at which wood is only sawed, or wood is sawed and subjected to excluded activities, or

ii

1,000 cubic metres in any other case.

Interpretation of Part B

1

In this Part—

“excluded activity” means any relevant activity (other than sawing) which, ignoring any sawing carried on at the works, would be unlikely to result in the release into the air of any substance in paragraph 6(3) of Part 1 in a quantity capable of causing significant harm;
“relevant activity” means the sawing, drilling, sanding, shaping, turning, planing, curing or chemical treatment of wood;
“throughput” means the amount of wood which is subjected to a relevant activity, but where wood is subject to two or more relevant activities at the same works, the second and any subsequent activity must be ignored;
“wood” includes any product consisting wholly or mainly of wood; and
“works” includes a sawmill or any other premises where relevant activities are carried on.

SECTION 6.7Activities Involving Rubber

Part A(2)

a

Manufacturing new tyres (but not remoulds or retreads) if this involves the use in any period of 12 months of 50,000 or more tonnes of one or more of the following—

i

natural rubber,

ii

synthetic organic elastomers,

iii

other substances mixed with them.

Part B

a

Unless falling within Part A(1) or Part A(2) of any Section, the mixing, milling or blending of—

i

natural rubber, or

ii

synthetic organic elastomers,

if carbon black is used.

b

Any activity which converts the product of an activity falling within paragraph (a) into a finished product if related to an activity falling within that paragraph.

SECTION 6.8The Treatment of Animal and Vegetable Matter and Food Industries

Interpretation of Section 6.8

1

In this Section—

“animal” includes a bird or a fish;
“excluded activity” means—
1. a
  any activity carried on in a farm or agricultural holding other than the manufacture of goods for sale,
2. b
  the manufacture or preparation of food or drink for human consumption but excluding—
  1. i
    the extraction, distillation or purification of animal or vegetable oil or fat otherwise than as an activity incidental to the cooking of food for human consumption,
  2. ii
    any activity involving the use of green offal or the boiling of blood except the cooking of food (other than tripe) for human consumption,
  3. iii
    the cooking of tripe for human consumption elsewhere than on premises on which it is to be consumed,
3. c
  the fleshing, cleaning and drying of pelts of fur-bearing mammals,
4. d
  any activity carried on in connection with the operation of a knacker's yard,
5. e
  any activity for the manufacture of soap not falling within Part A(1) of Section 4.1,
6. f
  the storage of vegetable matter not falling within any other Section,
7. g
  the cleaning of shellfish shells,
8. h
  the manufacture of starch,
9. i
  the processing of animal or vegetable matter at premises for feeding a recognised pack of hounds which have been granted an authorisation under the Animal By-Products Regulations 2005 M44 or the Animal By-Products (Wales) Regulations 2006 M45,
10. j
  the salting of hides or skins, unless related to any other activity listed in this Schedule,
11. k
  any activity for composting animal or vegetable matter or a combination of both, except where that activity is carried on for the purposes of cultivating mushrooms,
12. l
  any activity for cleaning, and any related activity for drying or dressing, seeds, bulbs, corms or tubers (and “related activity” means an activity being carried on by the same person at the same site),
13. m
  the drying of grain or pulses,
14. n
  any activity for the production of cotton yarn from raw cotton or for the conversion of cotton yarn into cloth;
“food” includes—
1. a
  drink,
2. b
  articles and substances of no nutritional value which are used for human consumption, and
3. c
  articles and substances used as ingredients in the preparation of food;
“green offal” means the stomach and intestines of any animal, other than poultry or fish, and their contents.

Part A(1)

a

Tanning hides and skins at a plant with a treatment capacity of more than 12 tonnes of finished products per day.

b

Slaughtering animals at a plant with a carcass production capacity of more than 50 tonnes per day.

c

Disposing of or recycling animal carcasses or animal waste, other than by rendering or by incineration falling within Section 5.1, at a plant with a treatment capacity exceeding 10 tonnes per day of animal carcasses or animal waste or both in aggregate.

d

Treating and processing materials intended for the production of food products from—

i

animal raw materials (other than milk) at a plant with a finished product production capacity of more than 75 tonnes per day; or

ii

vegetable raw materials at a plant with a finished product production capacity of more than 300 tonnes per day (average value on a quarterly basis).

e

Treating and processing milk, the quantity of milk received being more than 200 tonnes per day (average value on an annual basis).

f

Processing, storing or drying by the application of heat the whole or part of any dead animal or any vegetable matter (other than the treatment of effluent so as to permit its discharge into controlled waters or into a sewer unless the treatment involves the drying of any material with a view to its use as animal feedstuff) if the processing, storing or drying—

i

does not fall within any other Section, or Part A(2) of this Section and is not an excluded activity; and

ii

may result in the release into water of any substance in paragraph 7 of Part 1 in a quantity which, in any period of 12 months, is greater than the background quantity by more than the amount specified in relation to the substance in that paragraph.

Part A(2)

a

Disposing of or recycling animal carcasses or animal waste by rendering at plant with a treatment capacity exceeding 10 tonnes per day of animal carcasses or animal waste or both in aggregate.

Part B

a

i

does not fall within another Section, or Part A(1) or Part A(2) of this Section;

ii

is not an excluded activity; and

iii

may result in the release into the air of—

aa

any substance in paragraph 6(3) of Part 1, or

bb

any offensive smell noticeable outside the premises on which the activity is carried on.

b

Breeding maggots in any case where 5 or more kg of animal matter, vegetable matter or both in aggregate, are introduced into the process in any week.

SECTION 6.9Intensive Farming

Part A(1)

a

Rearing poultry or pigs intensively in an installation with more than—

i

40,000 places for poultry;

ii

2,000 places for production pigs (over 30 kg); or

iii

750 places for sows.

SECTION 7SED Activities

Part B

a

The activities listed in the table below if they are operated above the solvent consumption threshold for the activity.

Activity	Solvent consumption threshold in tonnes/year
Heatset web offset printing	15
Publication rotogravure	25
Other rotogravure, flexography, rotary screen printing, laminating or varnishing units	15
Rotary screen printing on textile/cardboard	30
Surface cleaning using substances or preparations which because of their content of volatile organic compounds classified as carcinogens, mutagens or toxic to reproduction under Directive 67/548/EEC on the approximation of laws, regulations and administrative provisions relating to the classification, packaging and labelling of dangerous substances M46 are assigned or need to carry one or more of the risk phrases R45, R46, R49, R60 or R61, or halogenated VOC's which are assigned or need to carry the risk phrase R40	1
Other surface cleaning	2
Vehicle coating and vehicle refinishing	0.5
Coil coating	25
Other coating activities, including metal, plastic, textile (except rotary screen printing on textile), fabric, film and paper coating	5
Winding wire coating	5
Coating activity applied to wooden surfaces	15
Dry cleaning	0
Wood impregnation	25
Coating activity applied to leather	10
Footwear manufacture	5
Wood and plastic lamination	5
Adhesive coating	5
Manufacture of coating preparations, varnishes, inks and adhesives	100
Rubber conversion	15
Vegetable oil and animal fat extraction and vegetable oil refining activities	10
Manufacturing of pharmaceutical products	50

Interpretation and application of Part B

1

For the purposes of this Part—

“adhesive” means any preparation, including all the organic solvents or preparations containing organic solvents necessary for its proper application, which is used to adhere separate parts of a product;
“adhesive coating” means any activity in which an adhesive is applied to a surface, excluding the application of adhesive and laminating associated with printing activities;
“coating” means any preparation, including all the organic solvents or preparations containing organic solvents necessary for its proper application, which is used to provide a decorative, protective or other functional effect on a surface;
“coating activity” means any activity in which a single or a multiple application of a continuous film of a coating is applied (including a step in which the same article is printed using any technique) but does not include the coating of substrate with metals by electrophoretic and chemical spraying techniques;
“coil coating” means any activity where coiled steel, stainless steel, coated steel copper alloys or aluminium strip is coated with either a film forming or laminate coating in a continuous process;
“consumption” means the total input of organic solvents into an installation per calendar year, or any other twelve month period, less any volatile organic compounds that are recovered for reuse;
“dry cleaning” means any industrial or commercial activity using volatile organic compounds to clean garments, furnishing and similar consumer goods excluding the manual removal of stains and spots in the textile and clothing industry;
“flexography” means a printing activity using an image carrier of rubber or elastic photopolymers on which the printing areas are above the non-printing areas, and liquid inks which dry through evaporation;
“footwear manufacture” means any activity of producing complete footwear or parts of footwear;
“heat web offset printing” means a web-fed printing activity using an image carrier in which the printing and non-printing area are in the same plane, where—
1. a
  the non-printing area is treated to attract water and reject ink,
2. b
  the printing area is treated to receive and transmit ink to the surface to be printed, and
3. c
  evaporation takes place in the oven where hot air is used to heat the printed material;
“ink” means a preparation, including all the organic solvents or preparations containing organic solvents necessary for its proper application which is used in a printing activity to impress text or images on to a surface;
“laminating associated to a printing activity” means the adhering together of two or more flexible materials to produce laminates;
“manufacturing of coating preparations, varnishes, inks and adhesives” means the manufacture of coating preparations, varnishes, inks and adhesives as final products and where carried on at the same site, the manufacture of intermediates by the mixing of pigments, resins and adhesive materials with organic solvent or other carrier, including—
1. a
  dispersion and predispersion activities,
2. b
  viscosity and tint adjustments, and
3. c
  operations for filling the final product into its container;
“manufacturing of pharmaceutical products” means one or more of the following activities—
1. a
  chemical synthesis,
2. b
  fermentation,
3. c
  extraction, or
4. d
  formulation and finishing,
of pharmaceutical products and, where carried on at the same site, the manufacture of intermediate products;
“the Motor Vehicle Directive” means Council Directive 70/156/EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers M47;
“organic compound” means any compound containing at least the element carbon and one or more of hydrogen, halogens, oxygen, sulphur, phosphorus, silicon or nitrogen, with the exception of carbon oxides and inorganic carbonates and bicarbonates;
“organic solvents” means any volatile organic compound which is used alone or in combination with other agents, and without undergoing a chemical change to dissolve raw materials, products or waste materials, as a—
1. a
  cleaning agent to dissolve contaminants,
2. b
  dissolver,
3. c
  dispersion medium,
4. d
  viscosity adjuster,
5. e
  surface tension adjuster,
6. f
  plasticiser, or
7. g
  preservative;
“other coating activities” means a coating activity applied to—
1. a
  trailers, defined in categories O1, O2, O3, and O4 in the Motor Vehicle Directive,
2. b
  metallic and plastic surfaces including surfaces of airplanes, ships, trains, or
3. c
  textile, fabric, film and paper surfaces;
“printing activity” means any activity (not being a step in a coating activity) for reproducing text and/or images in which, with the use of an image carrier, ink is transferred onto any type of surface, including the use of associated varnishing, coating and laminating techniques;
“publication rotogravure” means a rotogravure printing activity used for printing paper for magazines, brochures, catalogues or similar products, using toluene-based inks;
“reuse” means the use of organic solvents recovered from an installation for any technical or commercial purpose and including use as a fuel but excluding the final disposal of such recovered organic solvent as waste;
“rotary screen printing” means a web-fed printing activity in which liquid ink which dries only through evaporation is passed onto the surface to be printed by forcing it through a porous image carrier, in which the printing area is open and the non-printing area is sealed off;
“rotogravure” means a printing activity, using a cylindrical image carrier in which the printing area is below the non-printing area and liquid inks which dry through evaporation, and in which the recesses are filled with ink and the surplus is cleaned off the non-printing area before the surface to be printed contacts the cylinder and lifts the ink from the recesses;
“rubber conversion” means—
1. a
  any activity of mixing, milling, blending, calendering, extrusion and vulcanisation of natural or synthetic rubber, and
2. b
  any ancillary operations for converting natural or synthetic rubber into a finished product;
“surface cleaning” means any activity, except dry cleaning, using organic solvents to remove contamination from the surface of material including degreasing but excluding the cleaning of equipment; and a cleaning activity consisting of more than one step before or after any other activity must be considered as one surface cleaning activity;
“varnish” means a transparent coating;
“varnishing” means an activity by which varnish or an adhesive coating for the purpose of sealing the packaging material is applied to a flexible material;
“vegetable oil and animal fat extraction and vegetable oil refining activities” means any activity to extract vegetable oil from seeds and other vegetable matter, the processing of dry residues to produce animal feed, the purification of fats and vegetable oils derived from seeds, vegetable matter or animal matter;
“vehicle coating” means a coating activity applied to the following vehicles—
1. a
  new cars, defined as vehicles of category M1 in the Motor Vehicle Directive, and of category N1 in so far as they are coated at the same installation as M1 vehicles,
2. b
  truck cabins, defined as the housing for the driver, and all integrated housing for the technical equipment, of vehicles of categories N2 and N3 in the Motor Vehicle Directive,
3. c
  vans and trucks, defined as vehicles of categories N1, N2 and N3 in the Motor Vehicle Directive, but not including truck cabins, or
4. d
  buses, defined as vehicles in categories M2 and M3 in the Motor Vehicle Directive;
“vehicle refinishing” means any industrial or commercial coating activity and associated degreasing activities performing—
1. a
  the original coating of road vehicles as defined in the Motor Vehicle Directive or part of them with refinishing-type materials, where this is carried on away from the original manufacturing line, or
2. b
  the coating of trailers (including semi-trailers) (category O in the Motor Vehicle Directive);
“volatile organic compound” or “VOC” means—
1. c
  any organic compound having a vapour pressure of 0.01 or more kPa at 293.15K or having a corresponding volatility under the particular conditions of use, or
2. d
  the fraction of creosote which exceeds a vapour pressure of 0.01 kPA at 293.15K;
“web-fed” means that the material to be printed is fed to the machine from a reel as distinct from separate sheets;
“winding wire coating” means any coating activity of metallic conductors used for winding the coils in transformers and motors, etc;
“wood and plastic lamination” means any activity to adhere together wood or plastic to produce laminated products;
“wood impregnation” means any activity giving a loading of preservative in timber.

2

An activity must be deemed to be operated above the solvent consumption threshold specified for that activity under this Part if the activity is likely to be operated above that threshold in any period of 12 months.

3

An activity listed in this Part includes the cleaning of equipment but, except for a surface cleaning activity, not the cleaning of products.

SCHEDULE 2Exempt waste operations: general

Regulations 2(1) and 5

Interpretation: general1

In this Schedule—

“notifiable exempt waste operation” means an exempt waste operation in relation to which notice must be given to the exemption registration authority under paragraph 3(1)(b);
“registered”, in relation to an establishment or undertaking, means that the relevant particulars appear in the register, and “registration” must be construed accordingly;
“relevant particulars” means—
1. a
  the information in paragraph 4(3), and
2. b
  in the case of a waste operation falling within paragraph 45(1) or 45(3) of Schedule 3, the plan referred to in paragraph 6(2)(b).

Interpretation: exemption registration authority2

1

Subject to sub-paragraphs (2) and (3), the exemption registration authority in relation to a waste operation falling within Part 1 of Schedule 3 is the Agency.

2

The exemption registration authority in relation to the following waste operations is the local authority regulator—

a

a waste operation falling within paragraph 2, 3, 24 or 43 of Schedule 3;

b

a waste operation falling within paragraph 4(3) of Schedule 3, if—

i

the operation relates to the coating or spraying of metal containers, and

ii

that coating or spraying is an activity within Part B of Section 6.4 of Part 2 of Schedule 1;

c

a waste operation falling within paragraph 12(3) of Schedule 3, if—

i

the operation relates to the composting of biodegradable waste,

ii

the operation is an activity within paragraph (a) of Part B of Section 6.8 of Part 2 of Schedule 1, and

iii

the compost is to be used for cultivating mushrooms.

3

The exemption registration authority in relation to a waste operation falling within paragraph 23 of Schedule 3 is the authority responsible for granting an authorisation—

a

in England, under regulation 27 of the Animal By-Products Regulations 2005 M48;

b

in Wales, under regulation 27 of the Animal By-Products (Wales) Regulations 2006 M49.

4

In this paragraph “local authority regulator” means the local authority responsible for granting an environmental permit authorising the Part B activity in question.

Registration, notification and consent requirements for exempt waste operations3

1

The requirements referred to in regulation 5(1)(a) are—

a

an establishment or undertaking must be registered in relation to the waste operation, except in relation to a waste operation falling within paragraph 48 of Schedule 3;

b

an establishment or undertaking carrying on a waste operation falling within a description mentioned in sub-paragraph (2) must give notice to the exemption registration authority in accordance with paragraph 8; and

c

a waste operation falling within a description mentioned in sub-paragraph (3) must be carried on—

i

by, or with the consent of, the occupier of the land where the operation is carried on, or

ii

by a person who is otherwise entitled to do so on that land.

2

The descriptions mentioned in this sub-paragraph are the waste operation descriptions in paragraphs 6, 7, 9, 10, 19 , 40 and 46 of Schedule 3.

3

The descriptions mentioned in this sub-paragraph are the waste operation descriptions in paragraphs 4, 6, 7 ,8, 9, 11, 13, 14, 15, 17, 18, 19, 25, 40, 41, 42, 45, 46 and 48 of Schedule 3.

ensure that its register is open to inspection by members of the public free of charge at all reasonable hours; and

b

provide reasonable facilities to members of the public for obtaining a copy of an entry on payment of a reasonable charge.

6

A register may be kept in any form.

Duty to remove entries from the register5

1

The duty to maintain a register in paragraph 4(1) includes a duty to remove an entry if—

a

the exemption registration authority becomes aware that the establishment or undertaking has ceased to carry out the waste operation;

b

the waste operation is no longer an exempt waste operation;

c

in the case of a waste operation falling within paragraph 45(1) or 45(3) of Schedule 3, the exemption registration authority—

i

has carried out an inspection in accordance with the second paragraph of Article 6(2) of the End-of-Life Vehicles Directive, and

ii

is not satisfied as to the particulars required to be verified under that paragraph; or

d

in the case of a waste operation falling within paragraph 40 of Schedule 3, the exemption registration authority—

i

has carried out an inspection in accordance with the second paragraph of Article 6(2) of the WEEE Directive, and

ii

is not satisfied as to the particulars required to be verified under that paragraph.

2

An exemption registration authority must notify the establishment or undertaking in question if it removes an entry from the register under this paragraph.

Extra requirements in relation to recovery and storage of scrap metal or waste motor vehicles6

1

An exempt waste operation falling within paragraph 45(1) or 45(3) of Schedule 3 must comply with the extra requirements mentioned in sub-paragraph (2).

2

The requirements are that—

a

the notice is given by the establishment or undertaking carrying on the operation;

b

the notice is accompanied by a plan of every place at which the operation is carried on showing—

i

the boundaries of the place,

ii

the locations within the place at which the exempt waste operation is to be carried on,

iii

the location and specifications of any impermeable pavement or drainage system mentioned in paragraph 45(1)(c), 45(3)(f) or 45(3)(g) of Schedule 3, and

iv

the location of any secure container mentioned in paragraph 45(3)(e) of Schedule 3;

c

the notice is accompanied by payment of any charge prescribed for the purpose by a charging scheme under section 41 of the 1995 Act M50; and

d

if the operation comprises or includes the dismantling of waste motor vehicles, the exemption registration authority—

i

has carried out an inspection in accordance with the second paragraph of Article 6(2) of the End-of-Life Vehicles Directive, and

ii

is satisfied as to the particulars required to be verified under that paragraph.

3

A verification under sub-paragraph (2)(d) is valid for 12 months, but the exemption registration authority may inspect and verify again before a verification becomes invalid.

Removal of entries in relation to recovery and storage of scrap metal or waste motor vehicles7

1

The exemption registration authority must remove a register entry relating to a waste operation requiring verification under paragraph 6(2)(d) if the verification becomes invalid.

2

If a fee payable under paragraph 45(5)(f) of Schedule 3 is not received by the exemption registration authority within 2 months of the due date, ascertained in accordance with paragraph 45(6) of that Schedule, the authority must—

a

amend the register in accordance with sub-paragraph (3); and

b

notify the establishment or undertaking in question.

3

The register must be amended to remove the registration in respect of every place—

a

where an exempt waste operation to which this paragraph applies is carried on; and

b

in respect of which the fee remains unpaid.

Every such notice must be in the form required by the authority.

5

Every such notice must be accompanied by payment of any charge prescribed for the purpose by a charging scheme under section 41 of the 1995 Act.

Notifiable exempt waste operations: changes to the quantity of waste disposed of or recovered9

An establishment or undertaking which wishes to dispose of or recover a quantity of waste greater than that notified to the exemption registration authority must give the authority a further notice which complies with paragraph 8.

Notifiable exempt waste operations: renewal notices10

1

An establishment or undertaking which—

a

carries on a notifiable exempt waste operation; and

b

wishes to maintain its entry on the register,

must give a renewal notice in writing to the exemption registration authority within 12 months of the date the particulars were entered or last renewed.

2

Every renewal notice must contain—

a

confirmation that the establishment or undertaking continues to carry on the exempt waste operation;

b

the information required by paragraph 8(1); and

c

if it is in relation to an exempt waste operation mentioned in paragraph 8(2), the certificate required by that paragraph.

3

Every renewal notice must be accompanied by payment of any charge prescribed for the purpose by a charging scheme under section 41 of the 1995 Act.

Notifiable exempt waste operations: duties of the exemption registration authority11

1

If an exemption registration authority receives a notice under paragraph 3(1)(b) or 9, it must—

a

enter the relevant particulars on the register; or

b

during the relevant period, refuse to do so.

2

1

Every exemption registration authority must carry out appropriate periodic inspections of establishments and undertakings carrying on exempt waste operations in respect of which it is the exemption registration authority.

2

If an exempt waste operation falls within paragraph 45(1) or 45(3) of Schedule 3, or involves the treatment of WEEE, the exemption registration authority must discharge that duty by carrying out an inspection—

a

within 2 months of receipt of a notice fulfilling the extra requirements in paragraph 6; and

b

subsequently, at least every 12 months.

3

If an exempt waste operation involves the treatment of WEEE, the inspection must be carried out for the purposes of the second paragraph of Article 6(2) of the WEEE Directive.

SCHEDULE 3Descriptions: exempt waste operations and other operations to which section 33(1)(a) of the 1990 Act does not apply

Regulations 5(1)(b) and 68(1)

PART 1Exempt waste operations: descriptions

Interpretation1

1

In this Schedule—

“the 1989 Regulations” means the Sludge (Use in Agriculture) Regulations 1989 M52;
“the 1991 Act” means the Water Resources Act 1991 M53;
“best available treatment, recovery and recycling techniques” has the meaning given in the document published jointly by the Department for Environment, Food and Rural Affairs, the Welsh Assembly Government and the Scottish Executive on 27th November 2006, entitled “Guidance on Best Available Treatment, Recovery and Recycling Techniques (BATRRT) and Treatment of Waste Electrical and Electronic Equipment (WEEE)”M54;
“construction work” includes the repair, alteration or improvement of existing works;
“domestic purposes” has the same meaning as in section 218 of the Water Industry Act 1991 M55;
“food production purposes” means the manufacturing, processing, preserving or marketing purposes with respect to food or drink for which water supplied to food production premises may be used, and for the purposes of this definition “food production premises” means premises used for the purposes of a business of preparing food or drink for consumption otherwise than on the premises;
“inland waters” has the meaning given by section 221(1) of the 1991 Act;
“internal drainage board” has the same meaning as in section 1(1) of the Land Drainage Act 1991 M56;
“operational land” unless the context otherwise requires has the meaning given by sections 263 and 264 of the Town and Country Planning Act 1990 M57;
“recycling”, “reuse” and “treatment”, in relation to WEEE, have the meanings given by Article 3 of the WEEE Directive;
“scrap metal” has the meaning given by section 9(2) of the Scrap Metal Dealers Act 1964 M58;
“sealed drainage system” in relation to an impermeable pavement, means a drainage system with impermeable components which does not leak and which will ensure that—
1. a
  no liquid will run off the pavement otherwise than via the system, and
2. b
  except where they may be lawfully discharged, all liquids entering the system are collected in a sealed sump;
“work” includes preparatory work.

2

In this Schedule, a 6 digit code used to refer to a waste is a reference to that waste as specified by the 6 digit code—

a

in England, in the List of Wastes (England) Regulations 2005 M59;

b

in Wales, in the List of Wastes (Wales) Regulations 2005 M60.

3

An asterisk following any such code indicates that the waste is considered to be hazardous pursuant to Directive 91/689/EEC on hazardous waste M61, and subject to the provisions of that Directive unless Article 1(5) of that Directive applies.

4

When interpreting this Schedule a container, lagoon or other place is secure in relation to waste kept in it if—

a

all reasonable precautions are taken to ensure that the waste cannot escape from it; and

b

members of the public are unable to gain access to the waste.

Scrap metal furnaces2

1

Loading or unloading a scrap metal furnace, except at a place used for carrying on the business of a scrap metal dealer (within the meaning given by section 9(1) of the Scrap Metal Dealers Act 1964).

2

Storing, at the place where a scrap metal furnace is located, scrap metal intended to be loaded into that scrap metal furnace.

3

In this paragraph “scrap metal furnace” means a furnace—

a

with a designed holding capacity of less than 25 tonnes operated such that it is or forms part of an activity within—

i

paragraph (a), (b) or (d) of Part B of Section 2.1 of Part 2 of Schedule 1, or

ii

paragraph (a), (b) or (e) of Part B of Section 2.2 of Part 2 of Schedule 1; and

b

which is operated under an environmental permit.

Burning waste as a fuel3

1

Secure storage on any premises of any specified substance which is intended to be burned or fed into an appliance in which it is to be burned if—

a

no more than 25 tonnes is stored there at any one time; and

b

no waste is stored there for longer than 12 months.

2

In this paragraph—

a

c

no more than 250 tonnes of sludge per hectare is used on the land in any period of 12 months.

2

Storage in a secure container or lagoon (or, in the case of dewatered sludge, in a secure place) of sludge intended to be used for such treatment if—

a

the sludge is stored at the place where it is to be used;

b

the sludge is stored at least—

i

10 metres from any watercourse,

ii

50 metres from any spring or well, or from any borehole not used to supply water for domestic or food production purposes, and

iii

250 metres from any borehole used to supply water for domestic or food production purposes;

c

no sludge is stored within a zone defined by a 50 day travel time for groundwater to reach a groundwater source used to supply water for domestic or food production purposes;

d

no sludge is stored within 0.3 metres of the top of an open storage container or within 0.75 metres of the top of an earthbank tank or lagoon;

e

no sludge is stored for a period of more than 12 months; and

f

no more than 1,250 tonnes of sludge is stored at any one time.

3

In this paragraph “sludge” means residual sludge from sewage plants treating domestic or urban waste waters and from other sewage plants treating waste waters of a composition similar to domestic and urban waste waters.

Waste for the benefit of land7

1

Subject to sub-paragraph (5), treatment of land used for agriculture with any kind of waste specified in column 2 of the Table in sub-paragraph (3) from the corresponding source specified in column 1 of that Table where such treatment results in benefit to agriculture or ecological improvement.

2

Subject to sub-paragraph (5), treatment with a kind of waste specified in column 2 of Part 1 of the Table in sub-paragraph (3) from the corresponding source specified in column 1 of Part 1 of that Table of—

a

operational land of a railway, light railway, water undertaker, internal drainage board, British Waterways Board or the Agency; or

b

land which is a forest, woodland, park, garden, verge, landscaped area, sports ground, recreation ground, churchyard or cemetery,

where the land in question is not used for agriculture and such treatment results in ecological improvement.

3

The Table referred to in sub-paragraphs (1) and (2) is set out below.

Column 1	Column 2
Source of Waste	Kind of Waste
PART 1
Wastes from forestry, aquaculture, horticulture and fishing	Plant-tissue waste
Wastes from sugar processing	Soil from cleaning and washing beet
Wastes from wood processing and the production of panels and furniture	Waste bark and cork Sawdust shavings, cuttings, wood and particle board
Wastes from pulp, paper and cardboard production and processing	Waste bark and wood, pulp from virgin timber
Soil (excluding excavated soil from contaminated sites), stones and dredging spoil	Soil and stones
Wastes from aerobic treatment of solid wastes	Compost of biodegradable garden and park waste
Garden and park wastes (including cemetery waste)	Biodegradable waste Soil and stones
PART 2
Wastes from the preparation and processing of meat, fish and other foods of animal origin	Blood and gut contents from abattoirs, poultry preparation plants or fish preparation plants Wash waters and sludges (with or without treatment) from abattoirs, poultry preparation plants or fish preparation plants Shells from shellfish processing
Wastes from fruit, vegetables, cereals, edible oils, cocoa, coffee, tea and tobacco preparation and processing; conserve production; yeast and yeast extract production, molasses preparation and fermentation	All wastes derived from the processing of such materials
Wastes from sugar processing	All wastes derived from the processing of sugar
Wastes from the dairy products industry	Wastes derived from the processing of dairy products
Wastes from the baking and confectionery industry	All wastes derived from the processing of raw materials used in the baking and confectionery industry
Wastes from the production of alcoholic and non-alcoholic beverages (except coffee, tea and cocoa)	All wastes derived from the processing of the raw materials used in the production of such beverages
Wastes from pulp, paper and cardboard production and processing	De-inked paper sludge and de-inked paper pulp from paper recycling Lime mud waste
Wastes from the leather and fur industry	Sludges from on-site effluent treatment free of chromium
Wastes from the textile industry	Organic matter from natural products Wastes from finishing other than those containing organic solvents Sludges from on-site effluent treatment Wastes from textile fibres
Wastes from the manufacture of cement, lime and plaster and articles and products made from them	Wastes from calcinations and hydration of lime Gypsum
Wastes from power stations and other combustion plants	Gypsum
Soil (including excavated soil from contaminated sites), stones and dredging spoil	Dredging spoil (other than those containing dangerous substances)
Wastes from aerobic treatment of waste	Compost derived from source segregated biodegradable waste Liquor from aerobic treatment of source segregated biodegradable waste Digestate from aerobic treatment of source segregated biodegradable waste
Wastes from anaerobic treatment of waste	Compost derived from source segregated biodegradable waste Liquor from anaerobic treatment of source segregated biodegradable waste Digestate from anaerobic treatment of source segregated biodegradable waste
Wastes from the preparation of water intended for human consumption or water for industrial use	Sludges from water clarification

b

“operational land” in relation to an internal drainage board means land which is held for the purpose of carrying out its functions as an internal drainage board.

Storage of sludge which is to be used in accordance with the 1989 Regulations8

1

Storage in a secure container or lagoon (or, in the case of dewatered sludge, in a secure place) of sludge which is to be used in accordance with the 1989 Regulations if—

a

the sludge is stored at the place where it is to be used;

b

the sludge is stored at a distance of at least—

i

10 metres from any watercourse,

ii

50 metres from any spring or well, or from any borehole not used to supply water for domestic or food production purposes, and

iii

250 metres from any borehole used to supply water for domestic or food production purposes;

c

no sludge is stored within a zone defined by a 50 day travel time for groundwater to reach a groundwater source used to supply water for domestic or food production purposes;

d

no sludge is stored within 0.3 metres of the top of an open storage container or within 0.75 metres of the top of an earthbank tank or lagoon;

e

no sludge is stored for a period of more than 12 months; and

f

no more than 1,250 tonnes of sludge is stored at any one time.

2 Land reclamation or improvement9

1

Subject to sub-paragraph (3)—

a

spreading a kind of waste specified in column 2 of Part 1 of the Table in sub-paragraph (2) from the corresponding source specified in column 1 of Part 1 of that Table on any land; or

b

spreading a kind of waste specified in column 2 of Part 2 of the Table in sub-paragraph (2) from the corresponding source specified in column 1 of Part 2 of that Table on any land where that operation results in benefit to agriculture or ecological improvement.

2

The Table referred to in sub-paragraph (1) is set out below.

Column 1	Column 2
Source of Waste	Kind of Waste
PART 1
Wastes from physical and chemical processing of non-metalliferous minerals	Waste gravel and crushed rocks Waste sand and clays
Wastes from sugar processing	Soil from cleaning and washing beet
Wastes from power stations and other combustion plants (except wastes from waste management facilities, off-site waste water treatment plants and the preparation of water intended for human consumption and water for industrial use)	Pulverised fuel ash, bottom ash and slag
Wastes from manufacture of ceramic goods, bricks, tiles and construction products	Waste ceramics, bricks, tiles and construction products (after thermal processing)
Wastes from manufacture of cement, lime and plaster and articles and products made from them	Waste concrete and concrete sludge
Concrete, bricks, tiles and ceramics	Bricks Tiles and ceramics Mixtures of concrete, bricks, tiles and ceramics
Wastes from the mechanical treatment of waste (for example sorting, crushing, compacting, palletising) not otherwise specified	Minerals (for example sand, stones)
Wastes from soil and groundwater remediation	Solid wastes from soil remediation (other than those containing dangerous substances)
Garden and park wastes (including cemetery waste)	Soil and stones
Soil (including excavated soil from contaminated sites), stones and dredging spoil	Track ballast other than those containing dangerous substances
PART 2
Wastes from pulp, paper and cardboard production and processing	De-inked paper sludge and de-inked paper pulp Lime mud waste
Soil (including excavated soil from contaminated sites), stones and dredging spoil	Soil and stones other than those containing dangerous substances Dredging spoil other than those containing dangerous substances
Wastes from aerobic treatment of solid wastes	Compost
Wastes from waste water treatment plants	Sludges from treatment of urban waste water
Wastes from the preparation of water intended for human consumption or water for industrial use	Sludges from water clarification
Wastes from soil and groundwater remediation	Sludges from soil remediation (other than those containing dangerous substances)

3

An operation does not fall within sub-paragraph (1) unless—

a

the waste is spread for the purpose of reclamation, restoration or improvement of land which has been subject to industrial or other man-made development, and the use to which that land could be put would be improved by the spreading;

b

the waste is spread in accordance with any requirement of or under the Town and Country Planning Act 1990 M65;

c

the waste is spread to a depth not exceeding the lesser of—

i

2 metres, or

ii

the final cross-sections shown on any plan submitted under paragraph 8 of Schedule 2; and

d

no more than 20,000 cubic metres of waste are spread per hectare.

4

Secure storage for a period not exceeding 6 months, at the place where it is to be spread, of waste intended to be spread in reliance on sub-paragraph (1).

Sewage and water treatment works10

1

Treatment within the curtilage of a water treatment works of—

a

sludge from water clarification;

b

sludge from decarbonation solutions;

c

sludge from regeneration of solutions and ion exchanges; and

d

waste water and bore-hole flushings,

arising from water treatment at the works if the total quantity of waste which is treated in any period of 12 months does not exceed 10,000 cubic metres.

2

Secure storage of waste intended to be submitted to such treatment if that storage is at the works where the waste is produced.

3

Subject to sub-paragraph (5)—

a

any recovery operation carried on within the curtilage of a sewage treatment works (other than the recovery of sewage, sludge or septic tank sludge as an integral part of the operation of those works) in relation to a kind of waste specified in column 2 of the Table in sub-paragraph (4) from the corresponding source specified in column 1 of that Table; and

b

secure storage within the curtilage of a sewage treatment works of waste intended to be subjected to such a recovery operation.

4

The Table referred to in sub-paragraph (3) is set out below.

Column 1	Column 2
Source of Waste	Kind of Waste
Wastes from other sewage treatment works	Screenings Sludges from treatment of urban waste water
Other municipal wastes	Septic tank sludge Cesspool waste and other sewage sludge Waste from sewage cleaning
Wastes from the preparation of water intended for human consumption or for industrial use	Sludges from water clarification Sludges from decarbonation Solutions and sludges from regeneration of ion exchangers

5

An operation does not fall within sub-paragraph (3) unless—

a

the total quantity of waste brought to the sewage treatment works in any period of 12 months does not exceed 100,000 cubic metres; and

b

the operation is carried out on an area with an impermeable pavement capable of containing any spillage of waste received and connected to a drainage system with impermeable components which does not leak and which will ensure that—

i

no liquid will run off the pavement otherwise than via the system, and

ii

except where they may be lawfully discharged, all liquids entering the system are collected in a sealed sump.

6

In this paragraph—

“sludge” (in relation to sewage) means residual sludge from sewage plants treating domestic or urban waste waters and from other sewage plants treating waste waters of a composition similar to domestic and urban waste waters;
“septic tank sludge” means residual sludge from septic tanks and other similar installations for the treatment of sewage.

Preparatory treatments of certain waste11

1

Carrying on, at any place, an operation specified in column 2 of the Table in sub-paragraph (2) relating to a corresponding kind of waste listed in column 1 of that Table where—

a

the operation is carried on with a view to the recovery or reuse of the waste, whether or not by the person carrying it on; and

b

the total quantity of any particular kind of waste dealt with at that place does not in any period of 7 days exceed the corresponding limit specified in column 3 of that Table.

2

The Table referred to in sub-paragraph (1) is set out below.

Column 1	Column 2	Column 3
Kind of waste	Operations	Limit (tonnes per week)
Waste paper or cardboard	Baling, sorting or shredding	3,000
Waste textiles	Baling, sorting or shredding	100
Waste plastic	Baling, sorting, shredding, densifying or washing	100
Waste glass	Sorting, crushing or washing	1,000
Waste steel cans, aluminium cans or aluminium foil	Sorting, crushing, pulverising, shredding, compacting or baling	100
Waste food or drink cartons	Sorting, crushing, pulverising, shredding, compacting or baling	100

Composting waste12

1

Subject to sub-paragraph (2), composting biodegradable waste at the place where the waste is produced or where the compost is to be used, or at any other place occupied by the person producing the waste or using the compost, if the total quantity of waste being composted at that place at any time does not exceed—

a

in the case of waste composted or to be composted for the purposes of cultivating mushrooms, 10,000 cubic metres; and

b

in any other case, 1,000 cubic metres.

2

An operation does not fall within sub-paragraph (1) if it falls within paragraph (a) of Part B of Section 6.8 of Part 2 of Schedule 1.

3

Storing biodegradable waste which is to be composted if that storage is at the place where the waste is produced or is to be composted.

4

In this paragraph, “composting” includes any biological transformation process that results in materials which may be spread on land for the benefit of agriculture or ecological improvement.

1

Manufacturing finished goods from any of the following kinds of waste—

a

metal;

b

plastic;

c

glass;

d

ceramics;

e

rubber;

f

textiles;

g

c

the lining of the biobed is impermeable;

d

the biobed is suitable for treatment of the waste;

e

the biobed is covered with turf; and

f

the total quantity of waste being treated does not exceed 15,000 litres in any period of 12 months.

2

Secure covered storage of not more than 1,500 litres of waste at the place where it is intended to be so disposed of.

3

Treatment of land used for agriculture with agricultural waste consisting of biobed material where such treatment results in benefit to agriculture or ecological improvement if—

a

the biobed material is stored securely for 12 months before it is spread;

b

the biobed material consists of a mixture of straw, compost and biologically active soil;

c

the land is at least—

i

10 metres from a watercourse, and

ii

50 metres from a spring, well or borehole;

d

at the start of the treatment and at any time during the treatment—

i

the land has not been frozen for 12 or more hours during the preceding 24 hours, and

ii

the land is not waterlogged, flooded or snow-covered;

e

the operation is carried out in accordance with any requirement imposed by an action programme under the Action Programme for Nitrate Vulnerable Zones (England and Wales) Regulations 1998 M66; and

f

the total quantity of waste used does not exceed 50 tonnes per hectare in any period of 12 months.

4

Secure storage at the place of production of waste that is intended to be so treated if—

a

no more than 50 cubic metres is stored at any one time; and

b

no waste is stored for more than 3 years.

Storage of waste in a secure place17

1

Storage in a secure place on any premises of waste of a type listed in the Table in sub-paragraph (2) if—

a

the waste is stored for the purpose of its recovery;

b

the total quantity of any particular type of waste stored on those premises at any time does not exceed the corresponding storage limit specified in the Table;

c

the period for which any particular type of waste is stored on those premises does not exceed the corresponding limits specified in the Table;

d

in the case of hazardous waste, the waste is stored on an impermeable surface;

e

in the case of any solvents, chlorofluorocarbons, hydrochlorofluorocarbons, hydrofluorocarbons, paints or edible oil, the waste is stored in sealed leak proof containers; and

f

each kind of waste listed in the Table and stored on those premises is kept separately.

2

The Table referred to in sub-paragraph (1) is set out below.

Kind of Waste¹	Maximum quantity stored at one time	Maximum duration of storage
02 01 02, 02 02 02 (mammalian protein)	60,000 tonnes	12 months
02 01 02, 02 02 02 (mammalian tallow)	45,000 tonnes	12 months
10 11 12, 15 01 07, 16 01 20, 17 02 02, 19 12 05, 20 01 02 (glass)	5,000 tonnes	12 months
14 06 01* (chlorofluorocarbons, hydrochlorofluorocarbons and hydrofluorocarbons)	18 tonnes	6 months
14 06 02, 14 06 03, 20 01 13* (solvents and solvent mixtures)	5 cubic metres	6 months
15 01 01, 19 12 01, 20 01 01 (paper and cardboard)	15,000 tonnes	12 months
15 01 01, 19 12 01, 20 01 01 (cartons)	500 tonnes	12 months
15 01 02, 20 01 39 (plastic)	500 tonnes	12 months
15 01 04, 20 01 40 (cans and foil)	500 tonnes	12 months
16 01 03 (tyres)	1,000 tyres	12 months
17 01 01 to 17 08 02 except for 17 03 02, 17 05 04, 17 05 06 and 17 05 08 (non-hazardous construction and demolition waste articles which are to be used for construction work and are capable of being used in their existing state)	100 tonnes	12 months
15 01 03, 17 02 01, 17 02 04, 20 01 37, 20 01 38 (wood including telegraph poles and railway sleepers)	100 tonnes	12 months
15 01 09, 19 12 08, 20 01 10, 20 01 11 (textiles and clothes)	1,000 tonnes	12 months
20 01 25 (edible oil)	500 tonnes	12 months
20 01 27*, 20 01 28 (paints (excluding specialist and industrial paints, wood preservatives, aerosol and spray paints, inks, adhesives and resins) pending re-use as paint)	10,000 litres	6 months
¹ Where a description of a waste follows a 6 digit code, only that kind of waste falling within the code is included

Waste in secure containers18

1

The storage on any premises in a secure container or containers of waste of a kind listed in the Table in sub-paragraph (2) if—

a

the storage capacity of the container or containers does not exceed 400 cubic metres in total;

b

there are no more than 20 containers on those premises;

c

the waste is stored for the purpose of recovery;

d

each kind of waste listed in the Table and stored on the premises is kept separately;

e

the waste is not stored on the premises for longer than—

i

in the case of hypodermic syringes and sharps, 1 month,

ii

in any other case, 12 months;

f

the person storing the waste is the owner of the container or has the consent of the owner; and

g

the other requirements specified in relation to that kind of waste in the Table are met.

2

The Table referred to in sub-paragraph (1) is set out below.

Kind of Waste¹	Other requirements
13 01 09* to 13 07 01* except 13 03 01* to 13 03 10* and 13 05 01* to 13 05 08* (waste oils)	The waste is stored at a distance of at least 10 metres from any inland or coastal waters and 50 metres from any well, borehole or similar work sunk into underground strata for the purpose of any water supply; The storage capacity of any container or containers used for the waste does not exceed 3 cubic metres in total; Provision is made to prevent oil escaping into the ground.
15 01 01, 20 01 01 (cartons)
15 01 02, 20 01 39 (plastics and plastic packaging)
15 01 04, 20 01 40 (cans and foil)
20 01 99 (hypodermic syringes and sharps)	The storage capacity of the container or containers used for the waste does not exceed 2 cubic metres in total
15 01 01, 20 01 01 (paper and cardboard)
15 01 07, 20 01 02 (glass)
15 01 09, 20 01 10, 20 01 11 (textiles and clothes)
20 01 33* (sorted or unsorted separate collections of batteries containing hazardous batteries)
20 01 34 (sorted or unsorted separate collections of batteries not containing hazardous batteries)
¹ Where a description of a waste follows a 6 digit code, only that kind of waste falling within the code is included.

Waste for construction19

1

Storage on a site of a kind of waste specified in Column 2 of the Table in sub-paragraph (3) from the corresponding source specified in Column 1 of that Table for the purposes of relevant work carried on at the site, if—

a

the waste is suitable for use for those purposes;

b

no more than 50,000 tonnes of such waste are stored at the site; and

c

in the case of waste which is not produced on the site, it is not stored there for longer than 6 months.

2

The use of a kind of waste specified in Column 2 of the Table in sub-paragraph (3) from the corresponding source specified in Column 1 of that Table for the purposes of relevant work, if—

a

the waste is suitable for use for those purposes;

b

the work is carried out in accordance with any requirement of or under the Town and Country Planning Act 1990 M67; and

c

the waste is used to a depth that does not exceed the dimensions of the final cross sections shown on any plan submitted under paragraph 8 of Schedule 2.

3

The Table referred to in sub-paragraphs (1) and (2) is set out below.

Column 1	Column2
Source of Waste	Kind of Waste
Wastes from physical and chemical processing of non-metalliferous minerals	Waste gravel and crushed rocks other than those containing dangerous substances Waste sand and clays
Wastes from sugar processing	Soil from cleaning and washing beet
Wastes from power stations and other combustion plants (except wastes from waste management facilities, off-site waste water treatment plants and the preparation of water intended for human consumption and waste for industrial use)	Bottom ash, slag and boiler dust (excluding oil fly ash and boiler dust) Pulverised fuel ash Gypsum
Wastes from the iron and steel industry	Unprocessed slag
Wastes from the casting of ferrous and non ferrous pieces	Furnace slag
Wastes from the manufacture of ceramic goods, bricks, tiles and construction pieces	Waste ceramics, bricks, tiles and construction products (after thermal processing)
Wastes from the manufacture of cement, lime and plaster and articles and products made from them	Waste concrete and concrete sludge
Concrete, bricks, tiles and ceramics	Concrete Bricks Tiles and ceramics Mixtures of concrete, bricks, tiles and Ceramics
Wastes from incineration and pyrolysis of waste	Bottom ash and slag
Wastes from the mechanical treatment of waste (for example sorting, crushing, compacting, pelletising) not otherwise specified	Minerals (for example sand, stones)
Soil (including excavated soil from contaminated sites), stones and dredging spoil	Track ballast, soil and stones other than those containing dangerous substances Dredging spoil (unless it contains dangerous substances)
Garden and park waste (including cemetery waste)	Soil and stones
Bituminous mixtures, coal tar and tarred products	Road base and road planings

4

For the purposes of sub-paragraphs (1) and (2), dredging spoil is only suitable for use in drainage works.

5

Storage on a site of waste consisting of road planings and roadbase which are to be used for the purposes of relevant work carried on elsewhere if—

a

no more than 50,000 tonnes of such waste are stored at the site; and

b

the waste is stored there for no longer than six months.

6

In this paragraph—

“drainage” means drainage carried out for the purposes of the Land Drainage Act 1991 M68, the 1991 Act or the 1995 Act; and
“relevant work” means work for the construction, maintenance or improvement of—
1. a
  a building or a highway, railway, airport, dock or other transport facility;
2. b
  recreational facilities; or
3. c
  drainage,
but does not include work involving land reclamation.

Recovery of textiles20

1

Laundering or otherwise cleaning waste textiles with a view to their recovery or reuse.

2

Storing waste textiles at the place where they are to be so laundered or cleaned.

Preparatory treatments of waste plant matter21

1

Subject to sub-paragraph (2),—

a

chipping, shredding, cutting or pulverising waste plant matter, including wood or bark; or

b

sorting and baling sawdust or wood shavings,

on any premises.

2

An operation does not fall within sub-paragraph (1) unless—

a

it is carried on for the purposes of recovery or reuse; and

b

no more than 1,000 tonnes of such waste is dealt with on those premises in any period of 7 days.

3

Storage of waste in connection with an operation mentioned in sub-paragraph (1) at the premises where it is carried on if the total amount of waste stored at those premises does not at any time exceed 1,000 tonnes.

Recovery of silver22

1

Recovery, at any premises, of silver from waste produced in connection with printing or photographic processing if no more than 50,000 litres of such waste are dealt with on those premises in any day.

2

Storage, at those premises, of waste which is to be submitted to such a recovery operation.

Recovery of waste consisting of animal by-products at a collection centre23

1

The recovery of waste consisting of animal by-products at a collection centre—

a

in England, in accordance with an authorisation under regulation 27 of the Animal By-Products Regulations 2005 M69;

b

in Wales, in accordance with an authorisation under regulation 27 of the Animal By-Products (Wales) Regulations 2006 M70,

if the total quantity of waste being recovered at that collection centre at any time does not exceed 10 tonnes.

2

Storage of the waste intended to be submitted to such a recovery operation if—

a

b

the total amount of waste so deposited on any day does not exceed 50 tonnes for each metre of the bank or towpath along which it is deposited; and

c

the waste is not deposited in a container or lagoon.

2

Treatment by screening or dewatering of such waste—

a

on the bank or towpath of the waters where either the dredging or clearing takes place or the waste is to be so deposited, prior to the deposit;

b

on the bank or towpath of the waters where the dredging or clearing takes place, or at a place where the waste is to be spread, prior to its being spread as an exempt waste operation falling within paragraph 7(1) or 7(2); or

c

in the case of waste from dredging, on the bank or towpath of the waters where the dredging takes place, or at a place where the waste is to be spread, prior to its being spread as an exempt waste operation falling within paragraph 9(1).

Recovery or disposal as part of the production process26

1

Recovery or disposal of waste, at the place where it is produced, as an integral part of the process that produces it, except for final disposal by deposit in or on land.

2

Storage, at the place where it is produced, of waste which is intended to be so recovered or disposed of.

Baling, compacting, crushing, shredding or pulverising27

1

Baling, compacting, crushing, shredding or pulverising waste at the place where it is produced.

2

Storage, at the place where it is produced, of waste which is to be submitted to such an operation.

Spreading ash28

1

Mixing ash from the incineration of pig or poultry carcases at its place of production with manure for use in land treatment specified in sub-paragraph (2).

2

Treatment of land used for agriculture with agricultural waste at the place of production where such treatment results in benefit to agriculture or ecological improvement if—

a

the waste consists of ash from the incineration of pig or poultry carcases or such ash mixed with manure from an exempt waste operation falling within in sub-paragraph (1);

b

the land is at least—

i

10 metres from a watercourse, and

ii

50 metres from a spring, well or borehole;

c

at the start of the treatment and at any time during the treatment—

i

the land has not been frozen for 12 or more hours during the preceding 24 hours, and

ii

the land is not waterlogged, flooded or snow-covered;

d

the activity is carried out in accordance with any requirement imposed by an action plan under the Action Programme for Nitrate Vulnerable Zones (England and Wales) Regulations 1998 M72;

e

where the waste consists only of ash from the incineration of pig or poultry carcases, the waste is incorporated into the soil as soon as possible;

f

the total quantity of ash incorporated into the soil does not exceed 150 kilogrammes per hectare in any period of 12 months; and

g

the total quantity of nitrogen added to the soil as a result of the treatment does not exceed 250 kilogrammes per hectare in any period of 12 months.

3

Secure storage of not more than 100 tonnes of waste intended to be used for such treatment.

Disposal by burning at the place of production29

1

Burning waste at the place where it is produced by the person producing it in any of the following plant with a capacity of less than 50kg per hour—

a

an excluded plant within section 5.1 of Part 2 of Schedule 1;

b

any other incinerator not being used to incinerate clinical waste, sewage sludge, sewage screenings or municipal waste.

2

Secure storage at that place of that waste if it is intended to submit it to such burning.

for the purposes of research.

chemicals not consisting of or containing dangerous substances included in 18 01 07 or 18 02 06; and

e

medicines included in 18 01 08*, 18 01 09, 18 02 07*, 18 02 08, 20 01 31* or 20 01 32.

Repair or refurbishment of WEEE40

1

Subject to sub-paragraph (6), carrying on, at any secure place in respect of WEEE of a kind described in the Table in sub-paragraph (2), the treatment operations of repair or refurbishment or both if—

a

the operation is carried on with a view to the reuse of the WEEE for its original purpose;

b

the best available treatment, recovery and recycling techniques are used when carrying on the operation;

c

the total quantity of any particular kind of WEEE so dealt with at that place does not exceed the treatment limit specified in relation to that kind of WEEE in that Table; and

d

the technical requirements specified in Annex III of the WEEE Directive are met.

2

The Table referred to in sub-paragraph (1) is set out below.

Kind of Waste	Storage Limits	Treatment Limits
16 02 14 (WEEE other than those mentioned in 16 02 09 to 16 02 13)	80 cubic metres	5 tonnes per day
20 01 36 (WEEE other than those mentioned in 20 01 21, 20 01 23 and 20 01 35)	80 cubic metres	5 tonnes per day

3

Subject to sub-paragraph (6), carrying on, at any secure place in respect of WEEE that is hazardous waste of a kind described in the Table in sub-paragraph (4), the treatment operations of repair or refurbishment or both, but not including the degassing and capture of ozone depleting substances, if—

a

the operation is carried on with a view to the reuse of the WEEE for its original purpose;

b

best available treatment, recovery and recycling techniques are used when carrying on the operation;

c

the total quantity of any particular kind of WEEE so dealt with at that place does not exceed the treatment limit specified in relation to that kind of WEEE in that Table;

d

the technical requirements specified in Annex III of the WEEE Directive are met; and

e

the other requirements specified in relation to that kind of WEEE in that Table are met.

4

The Table referred to in sub-paragraph (3) is set out below.

Kind of Waste	Storage Limits	Treatment Limits	Other Requirements
16 02 11* (WEEE containing chlorofluorocarbons, HCFC, HFC) and 20 01 23* (WEEE containing chlorofluorocarbons)	80 cubic metres	5 tonnes per day	Stored and treated in a manner that will prevent the release of the CFCs, HCFCs or HFCs
Televisions and computer monitors containing cathode ray tubes falling within 16 02 13* (WEEE containing hazardous components other than those mentioned in 16 02 09 to 16 02 12) and 20 01 35* (WEEE other than those mentioned in 20 01 21 and 20 01 23 containing hazardous components)	80 cubic metres	5 tonnes per day

5

Subject to sub-paragraph (6), secure storage at the place where the operation is carried on of any WEEE of a kind described in the Tables in sub-paragraph (2) or (4) intended to be submitted to repair or refurbishment or both if—

a

the total quantity of any particular kind of WEEE so dealt with at that place does not exceed the storage limit specified in relation to that kind of WEEE in those Tables;

b

the technical requirements specified in Annex III of the WEEE Directive are met;

c

the other requirements specified in relation to that kind of WEEE in the Table in sub-paragraph (4) are met;

d

the WEEE is stored in such a manner that its environmentally sound reuse or recycling is not hindered; and

e

no WEEE is stored at that place for more than 12 months.

6

An operation does not fall within sub-paragraph (1), (3) or (5) at a place unless the person responsible for the management of that place has established administrative arrangements to ensure that—

a

WEEE accepted at that place is of kind described in the Table in sub-paragraph (2) or the Table in sub-paragraph (4), as the case may be; and

b

no waste is accepted at that place in such a quantity as would cause there to be a breach of any of the conditions of the exemption.

7

For the purposes of this paragraph, the storage and treatment limits specified in the Tables in sub-paragraphs (2) and (4) are overall limits that apply to all waste falling within the 6 digit code or codes specified in those Tables.

Secure storage of WEEE41

1

Secure storage at any place of WEEE of a kind described in the Table in sub-paragraph (2) if—

a

the WEEE is stored for the purpose of its recovery elsewhere;

b

the total quantity of any particular kind of WEEE stored at the site at any time does not exceed the storage limit specified in relation to that kind of WEEE in that Table;

c

the total duration that any particular kind of WEEE is stored for does not exceed the duration limits specified in relation to that kind of WEEE in that Table;

d

the type of containment specified in relation to that kind of WEEE in that Table are met; and

e

the WEEE is stored in such a manner that its environmentally sound reuse or recycling is not hindered.

2

The Table referred to in sub-paragraph (1) is set out below.

Kind of Waste	Maximum Quantity	Maximum Duration	Type of Containment
16 02 14 (WEEE other than those mentioned in 16 02 09 to 16 02 12)	80 cubic metres	3 months	impermeable surface; weatherproof coating of stored WEEE
20 01 36 (WEEE other than those mentioned in 20 01 21, 20 01 23 and 20 01 35)	80 cubic metres	3 months	impermeable surface; weatherproof coating of stored WEEE

3

Secure storage at any place of WEEE of a kind described in the Table in sub-paragraph (4) if—

a

the WEEE is stored for the purpose of its recovery elsewhere;

b

the total quantity of any particular WEEE stored at the site at any time does not exceed the storage limit specified in relation to that kind of WEEE in that Table;

c

the total duration that any particular kind of WEEE is stored for does not exceed the duration limits specified in relation to that kind of WEEE in that Table;

d

the type of containment and other requirements specified in relation to that kind of WEEE in that Table are met; and

e

the WEEE is stored in such a manner that its environmentally sound reuse or recycling is not hindered.

4

The Table referred to in sub-paragraph (3) is set out below.

Kind of Waste	Maximum quantity	Maximum duration	Type of containment	Other Requirements
16 02 11* (WEEE containing chlorofluorocarbons, HCFC, HFC) and 20 01 23* (WEEE containing chlorofluorocarbons)	80 cubic metres	3 months	impermeable surface; weatherproof covering of stored WEEE	stored in a manner that will prevent the release of the CFC, HCFC and HFC; the number of units in any stack must not exceed 2; the overall height of any stack must not exceed 3.5m
16 02 13* (WEEE containing hazardous components other than those mentioned in 16 02 09 to 16 02 12) and 20 01 35* (WEEE other than those mentioned in 20 01 21 and 20 01 23 containing hazardous components)	80 cubic metres	3 months	impermeable surface; weatherproof covering of stored WEEE
20 01 21* (fluorescent tubes and other mercury-containing waste)	50 cubic metres	3 months	appropriate secure containers; weatherproof covering	stored in such a way that the glass is not broken

5

For the purposes of sub-paragraphs (1) and (3), the operation of storage must be taken to include the incidental sorting of waste of that kind.

6 Crushing waste discharge lamps42

1

Crushing waste discharge lamps (including fluorescent tubes which are hazardous waste within category 20 01 21*) for the purposes of volume reduction prior to collection , where the material is intended for recovery or reuse if—

a

the operation is carried on in equipment designed for the purpose of volume reduction prior to collection;

b

the operation is carried on solely for that purpose;

c

every part of that place upon which the operation is carried out is surfaced with an impermeable pavement provided with a sealed drainage system; and

d

the plant or equipment used in carrying on the operation is maintained in reasonable working order.

2

The Table referred to in sub-paragraph (1) is set out below.

Column 1	Column 2	Column 3
Kind of Waste	Operations	Seven Day Limit
Ferrous metals or ferrous alloys in metallic non-dispersible form (but not turnings, shavings or chippings of those metals or alloys)	Sorting; grading; baling; shearing by manual feed; compacting; crushing; cutting by hand-held equipment	8,000 tonnes
The following non-ferrous metals, namely copper, aluminium, nickel, lead, tin, tungsten, cobalt, molybdenum, vanadium, chromium, titanium, zirconium, manganese or zinc, or non-ferrous alloys, in metallic non-dispersible form, of any of those metals (but not turnings, shavings or chippings of those metals or alloys)	Sorting; grading; baling; shearing by manual feed; compacting; crushing; cutting by hand-held equipment	400 tonnes
Turnings, shavings or chippings of any of the metals or alloys listed in either of the above categories	Sorting; grading; baling; shearing by manual feed; compacting; crushing; cutting by hand-held equipment	300 tonnes
Depolluted motor vehicles	Dismantling, rebuilding, restoring or reconditioning	40 vehicles
Lead acid motor vehicle batteries included in 16 06 01*, whether or not forming part of, or contained in, a motor vehicle	Sorting	20 tonnes

3

Subject to sub-paragraph (5), storage, at any secure place designed or adapted for the recovery of scrap metal or the dismantling of waste motor vehicles, of waste of a kind specified in column 1 of the Table in sub-paragraph (4) if—

a

the waste is to be submitted to any of the operations specified in the Table in sub-paragraph (2) in relation to that kind of waste, or to a recycling or reclamation operation authorised by an environmental permit;

b

the total quantity of waste of that kind stored at that place does not exceed the maximum total quantity specified in column 2 of the Table in sub-paragraph (4) in relation to that kind of waste;

c

no waste is stored at that place for a period exceeding 12 months;

d

each kind of waste is either stored separately or is kept in separate containers, but in a case where a consignment consisting of more than one kind of waste is delivered to that place, it may be stored unseparated at that place pending sorting for a period not exceeding 2 months;

e

in the case of waste which is liquid or consists of motor vehicle batteries, it is stored in a secure container;

f

subject to paragraph (g), the waste or, as the case may be, any container in which it is stored, is stored on an impermeable pavement which is provided with a sealed drainage system;

g

in the case of waste motor vehicles, they are, where appropriate, stored on an impermeable pavement; and

h

the height of any pile or stack of waste does not exceed 5 metres.

4

The Table referred to in sub-paragraph (3) is set out below.

Column 1	Kind of waste
Column 2	Maximum total quantity
Ferrous metals or ferrous alloys in metallic non-dispersible form (but not turnings, shavings or chippings of those metals or alloys)	50,000 tonnes
The following non-ferrous metals, namely copper, aluminium, nickel, lead, tin, tungsten, cobalt, molybdenum, vanadium, chromium, titanium, zirconium, manganese or zinc, or non-ferrous alloys, in metallic non-dispersible form, of any of those metals (but not turnings, shavings or chippings of those metals or alloys)	1,500 tonnes
Turnings, shavings or chippings of any of the metals or alloys listed in either of the above categories	1,000 tonnes
Motor vehicles, stored where appropriate on an impermeable pavement	1,000 vehicles
Lead acid motor vehicle batteries included in 16 06 01*, whether or not forming part of, or contained in, a motor vehicle	40 tonnes

5

An operation does not fall within sub-paragraph (1) or (3) at a place unless—

a

the person responsible for the management of that place has established administrative arrangements to ensure that—

i

waste accepted at that place is of a kind listed in the Table in sub-paragraph (2) or, as the case may be, the Table in sub-paragraph (4), and

ii

no waste is accepted at that place in such a quantity as would cause there to be a breach of any of the terms and conditions of the exemption;

b

that person carries out a monthly audit to confirm compliance with the terms and conditions of the exemption;

c

the records referred to in Article 14 of the Waste Framework Directive are kept in such a form as to show, for each month, the total quantity of each kind of waste recovered during that month at that place;

d

details of the total quantity of each kind of waste recovered at that place during the preceding 12 months are sent annually to the exemption registration authority with the charge referred to in paragraph (f);

e

an up to date plan of that place containing the details referred to in paragraph 6(2)(b) of Schedule 2 is sent annually to the exemption registration authority with the annual charge referred to in paragraph (f) below; and

f

the charge prescribed for the purpose by a charging scheme under section 41 of the 1995 Act M81 is paid in respect of that place to the exemption registration authority by the due date which must be ascertained in accordance with sub-paragraph (6).

6

For the purposes of ascertaining the due date in any year for payment of the charge referred in paragraph (5)(f) in respect of any place the exemption registration authority must serve notice in accordance with sub-paragraph (7) on the establishment or undertaking from which notice has been received by the exemption registration authority under paragraph 3(1)(b) of Schedule 2 in respect of that place.

7

A notice required by sub-paragraph (6) must be served not later than 1 month before the anniversary of the date when the notice, plan and charge referred to in paragraph 6 of Schedule 2 were received by the exemption registration authority in respect of that place and must specify—

a

the amount of the payment due;

b

the method of payment;

c

the date of such anniversary;

d

that payment is due on that date or, if later, upon the day falling 1 month after the date of the notice; and

e

the effect of payment not being made by the date on which it is due,

and the due date for payment of the annual fee for that year by that establishment or undertaking in respect of that place is the date specified for payment in the notice.

8

Temporary storage of waste (in this sub-paragraph referred to as the “non-scrap waste”), pending its collection, at a secure place designed or adapted for the recovery of scrap metal or the dismantling of waste motor vehicles if—

a

the non-scrap waste is not of a kind described in the Table in sub-paragraph (4);

b

the non-scrap waste was delivered to that place as part of a consignment of waste of which—

i

at least 70 per cent by weight was waste consisting of waste motor vehicles, or

ii

at least 95 per cent by weight was waste of any kind described in the Table in sub-paragraph (4) other than waste motor vehicles,

and is capable of being separated from that waste by sorting or hand dismantling;

c

the non-scrap waste is stored at that place for no more than 3 months;

d

where the non-scrap waste is liquid, it is stored in a secure container; and

e

the non-scrap waste or, as the case may be, the container in which the non-scrap waste is stored, is stored on an impermeable pavement which is provided with a sealed drainage system.

9

In this paragraph—

“depolluted”, in relation to waste motor vehicles, means subjected to all of the operations described in paragraph 3 of Annex I of the End-of-Life Vehicles Directive;
“shearing” means the cold cutting of metal by purpose-made shears;
“waste motor vehicle” has the meaning given in paragraph 2(1) of Schedule 11.

Burning plant tissue waste and wood at a dock46

1

Subject to sub-paragraph (3), burning at a dock of waste consisting of—

a

plant tissue waste; or

b

wood of any kind used to wedge or support parts of cargo, including packing material, spacers and pallets,

pursuant to a notice given under article 32 of the Plant Health (England) Order 2005 M82 or article 32 of the Plant Health (Wales) Order 2006 M83, if the waste is burned on a hardstanding, within a secure location at the dock where it was unloaded.

2

Subject to sub-paragraph (3), storage at the dock where it was unloaded of waste intended to be so burned.

3

An operation does not fall within this paragraph unless the total quantity of waste stored or burned, in any period of 24 hours, does not exceed 15 tonnes.

the recovery of scrap metal or the dismantling of waste motor vehicles; and

d

such storage is incidental to the collection or transport of the waste.

Temporary storage of scrap rails51

Temporary storage of scrap rails on operational land of a railway, a light railway or a tramway if the total quantity of that waste in any one place does not at any time exceed 10 tonnes and the storage is incidental to the collection or transport of the scrap rails.

Temporary storage of waste on the site where it is produced52

1

Temporary storage of waste, including WEEE, pending its collection, on the site where it is produced if—

a

the storage is not at a place designed or adapted for the recovery of scrap metal or the dismantling of vehicles;

b

in the case of vehicles, the storage complies with—

i

the general requirements in Article 4 of the Waste Framework Directive, and

ii

the relevant minimum technical requirements described in Annex I of the End-of-Life Vehicles Directive; and

c

in the case of hazardous waste it is stored on the site for no more than 12 months, and—

i

if liquid, it is stored in a secure container and the total volume of that waste does not at any time exceed 23,000 litres, and

ii

in any other case, either it is stored in a secure container and the total volume of that waste does not at any time exceed 80 cubic metres, or it is stored in a secure place and the total volume of that waste does not at any time exceed 50 cubic metres.

2

In this paragraph “vehicle” means a motor vehicle of any type that is waste.

F3Storage of waste portable batteries at a collection point 53

1

Storage of waste portable batteries, including hazardous waste, at a collection point.

2

In this paragraph—

“collection point” means a place where end-users are able to deposit waste portable batteries at the premises of a distributor fulfilling its duty to take back such batteries under regulation 31(1) of the Waste Batteries and Accumulators Regulations 2009;
“distributor” and “portable battery” have the meaning given in regulation 2(1) of those Regulations.

SCHEDULE 4Application of these Regulations to the Crown

Regulation 11

Crown application1

Subject to paragraphs 2 to 4, these Regulations bind the Crown.

Contravention of these Regulations by the Crown2

1

If the Crown contravenes a provision of these Regulations—

a

it is not criminally liable under regulation 38; and

b

no proceedings may be taken against it under regulation 42.

2

But—

a

on the application of a regulator, the High Court may declare a contravention of these Regulations by the Crown to be unlawful; and

b

these Regulations apply to persons in the public service of the Crown as they apply to other persons.

Entry to Crown premises3

1

If the appropriate authority considers that in the interests of national security particular powers of entry must not be used in relation to particular Crown premises it may certify that those powers must not be used in relation to those premises.

2

In this paragraph—

“Crown premises” means premises held or used by or on behalf of the Crown;
“power of entry” means a power of entry exercisable under section 108 of the 1995 Act M87, in relation to a function under these Regulations.

Service on certain Crown operators4

1

This paragraph applies in relation to a regulated facility operated or controlled by a person acting on behalf of—

a

the Royal Household;

b

the Duchy of Lancaster; or

c

the Duke of Cornwall or other possessor of the Duchy of Cornwall.

2

When serving or giving notices or notifications, or instituting proceedings, the following person must be treated as the operator—

a

in relation to sub-paragraph (1)(a), the Keeper of the Privy Purse;

b

in relation to sub-paragraph (1)(b), the person appointed by the Chancellor of the Duchy of Lancaster;

c

in relation to sub-paragraph (1)(c), the person appointed by the Duke of Cornwall or other possessor of the Duchy of Cornwall.

SCHEDULE 5Environmental permits

Regulations 13(2), 15(3), 20(4), 21(2) and 25(3)

PART 1Grant, variation, transfer and surrender of environmental permits

Interpretation1

In this Part—

“application” means an application—
1. a
  for the grant of an environmental permit under regulation 13(1),
2. b
  by an operator under regulation 20(1), for the variation of an environmental permit,
3. c
  for the transfer, in whole or in part, of an environmental permit under regulation 21(1), or
4. d
  for the surrender, in whole or in part, of an environmental permit under regulation 25(2);
“applicant” means—
1. a
  in the case of an application to transfer an environmental permit in whole or in part, the operator and the proposed transferee,
2. b
  in every other case, the operator;
“confidential information” has the meaning given in regulation 45;
“proposed transferee” means the person to whom an operator proposes to transfer an environmental permit in whole or in part;
“public consultee” means a person who in the regulator's opinion is affected by, is likely to be affected by, or has an interest in, an application;
“regulator initiated variation” means the variation of an environmental permit on the initiative of the regulator under regulation 20(1).

Making an application2

1

An application must—

a

3

If an application is deemed to be withdrawn, the applicant is not entitled to the return of any fee which accompanied it.

In this paragraph—

“change in operation” means a change in the nature or functioning, or an extension, of an installation, which may have consequences for the environment;
“co-incineration plant” has the meaning given in Section 5.1 of Part 2 of Schedule 1;
“dry cleaning” has the meaning given in Part B of Section 7 of Part 2 of Schedule 1;
“incineration plant” has the meaning given in Section 5.1 of Part 2 of Schedule 1;
“substantial change” means a change in operation of an installation which in the regulator's opinion may have significant negative effects on human beings or the environment and includes—
1. a
  in relation to a Part A installation, a change in operation which in itself meets the thresholds, if any, set out in Part 2 of Schedule 1, and
2. b
  in relation to an incineration plant or co-incineration plant for non-hazardous waste, a change in operation which would involve the incineration or co-incineration of hazardous waste.

6

When assessing whether a change in operation of a Part B installation has significant effects on the environment, the regulator must consider only its emissions to air.

Public participation in relation to certain applications6

1

Subject to sub-paragraphs (2) and (3), if this paragraph applies the regulator must, within the consultation communication period,—

a

take the steps it considers appropriate to inform the public consultees of the application and the place and times its public register can be inspected free of charge;

b

invite the public consultees to make representations on the application; and

c

i

if an appeal is brought, the date of determination or withdrawal of that appeal, or

ii

if no appeal is brought, the date on which the period for bringing an appeal expires.

Public participation in relation to regulator initiated variations8

1

If this paragraph applies, the regulator must notify the operator—

a

that the public participation procedures in sub-paragraph (2) apply;

b

of the variation it proposes to the environmental permit; and

c

of any fee prescribed in respect of this paragraph in a charging scheme made by the regulator under section 41 of the 1995 Act or by the appropriate authority under regulation 65.

2

The regulator must—

a

take the steps it considers appropriate to inform the public consultees of the proposed variation;

b

invite the operator and the public consultees to make representations on the proposed variation; and

c

specify to the operator and the public consultees the address to which and the period within which representations must be made.

Consultation: conditions mentioned in regulation 15(1)9

1

Duty to consider representations11

Before it determines an application or makes a regulator initiated variation, the regulator must consider any representation—

a

made pursuant to paragraph 6(1)(b), 8(2)(b) or 9(3)(c); or

b

sent to it under paragraph 10(3)(b).

Duty to determine an application12

1

The regulator must grant or refuse a duly-made application.

2

Except in the case of an application to surrender an environmental permit in whole, the regulator may grant an application subject to such conditions as it sees fit.

3

But—

a

variations of an environmental permit in relation to the grant of an application for variation, transfer in whole or in part, or partial surrender must be in consequence of the variation, transfer or partial surrender, as the case may be; and

b

if granting an application for partial transfer, the regulator must grant a new environmental permit to the transferee subject to the same conditions as the original permit, varied in consequence of the partial transfer.

Identity and competence of the operator13

1

The regulator must refuse an application for the grant of an environmental permit or the transfer in whole or in part of an environmental permit if it considers that the requirements in sub-paragraph (2) will not be satisfied.

2

The requirements are that the applicant, in the case of the grant of a permit, or the proposed transferee, in the case of the transfer of a permit in whole or in part, must—

a

be the operator of the regulated facility; and

b

operate the facility in accordance with the environmental permit.

Surrender applications14

The regulator must accept an application to surrender an environmental permit in whole or in part under regulation 25(2) if it is satisfied that the necessary measures have been taken—

in the case of an application to transfer an environmental permit in whole or in part, 2 months;

b

in a case where paragraph 6 applies, 4 months; or

c

in any other case, 3 months,

or in any case, a longer period than the period in paragraph (a), (b) or (c), if it is agreed by the regulator and the applicant.

Calculation of the relevant period16

1

This paragraph provides for the calculation of a period referred to in paragraph 15(2).

2

The period starts—

a

on the day the regulator receives a duly-made application; or

b

if paragraph 10 applies, on the day the appropriate authority complies with paragraph 10(3).

3

In calculating the period the following periods must be ignored—

a

a period from the service of a notice requiring further information under paragraph 4(1) to the receipt by the regulator of that information;

b

a period for representations mentioned in paragraph 9(3)(c) to the extent that it does not overlap with a period for representations mentioned in paragraph 6(1)(c);

c

a period during which national security or confidentiality is being considered in relation to the application, that is to say—

i

any period during which a determination under regulation 47(3), 47(7) or 50 is being considered (including any appeal), or

ii

a period of 15 working days after the service of a notice under regulation 49(1); and

d

if the regulator informs the public in relation to a draft decision in accordance with paragraph 1(d) of Annex V to the IPPC Directive, a period of 20 working days.

Notification of a determination or decision17

1

As soon as is reasonably practicable after it determines an application or decides to make a regulator initiated variation, the regulator must comply with sub-paragraph (2).

2

The regulator must—

a

In this Part—

“grantor” means a person who grants the operator rights pursuant to regulation 15(2);
“relevant interest” means an interest in land out of which rights have been granted pursuant to regulation 15(2);
“rights” means the rights granted by the grantor.

Entitlement to compensation21

A grantor is entitled to be paid compensation under this Part by the operator.

Loss and damage for which compensation is payable22

Subject to paragraph 25(3) and 25(5)(b), compensation is payable for loss and damage of the following descriptions—

a

depreciation in the value of any relevant interest to which the grantor is entitled which results from the grant of the rights;

b

depreciation in the value of any other interest in land to which the grantor is entitled which results from the exercise of the rights;

c

loss or damage, in relation to any relevant interest to which the grantor is entitled, which—

i

is attributable to the grant of the rights or the exercise of them,

ii

does not consist of depreciation in the value of that interest, and

iii

is loss or damage for which he would have been entitled to compensation by way of compensation for disturbance, if that interest had been acquired compulsorily—

aa

under the Acquisition of Land Act 1981 M89, and

bb

in pursuance of a notice to treat served on the date on which the rights were granted;

d

damage to, or injurious affection of, any interest in land to which the grantor is entitled which—

i

is not a relevant interest, and

ii

results from the grant of the rights or the exercise of them;

e

loss in respect of work carried out by or on behalf of the grantor which is rendered abortive by the grant of the rights or the exercise of them.

Date when entitlement to compensation arises23

1

An entitlement to compensation under this Part arises on the date of the grant of the rights.

2

But if an appeal against the conditions of the environmental permit which rendered the grant of rights necessary is refused, the entitlement to compensation arises on the date the appeal is finally determined.

distinguishing the amounts applied for under each of paragraphs 22(a) to 22(e), and

ii

showing how the amount applied for under each paragraph has been calculated; and

d

if the date on which the entitlement to compensation arises is ascertained in accordance with paragraph 23(2), a copy of the notice of the final determination of the appeal.

Assessment of the amount to be paid by way of compensation25

1

The amount to be paid by way of compensation under this Part must be assessed in accordance with this paragraph.

2

The rules set out in section 5 of the Land Compensation Act 1961 M90 have effect for the purposes of this paragraph as they have effect for the purpose of assessing compensation for the compulsory acquisition of an interest in land, so far as applicable and subject to any necessary modifications.

3

No account is to be taken of any enhancement of the value of an interest in land by reason of any building erected, work done, or improvement or alteration made on land in which the grantor is, or was at the time of erection, doing or making, directly or indirectly concerned if the erection of the building, the doing of the work, the making of the improvement or the alteration was not reasonably necessary and was undertaken with a view to obtaining compensation or increased compensation.

4

In calculating the amount of a loss under paragraph 22(e), expenditure incurred in the preparation of plans or on other similar preparatory matters must be taken into account.

5

c

in any other case, subject to any direction of the Lands Tribunal or the court, as soon as reasonably practicable after the amount of the compensation has been finally determined.

3

Any question of the application of paragraph 25(3) or dispute as to the amount of compensation must be referred to and determined by the Lands Tribunal.

4

In relation to the determination of such a question, sections 2 and 4 of the Land Compensation Act 1961 M91 apply as if—

a

the reference in section 2(1) of that Act to section 1 of that Act were a reference to sub-paragraph (3) of this paragraph; and

b

references in section 4 of that Act to the acquiring authority were references to the operator.

Interest payable on compensation27

1

Compensation payable under this Part carries interest at the rate for the time being prescribed under section 32 of the Land Compensation Act 1961 from the date specified in sub-paragraph (2) to payment.

2

The date is—

a

in the case of compensation payable under paragraph 22(a) or 22(b), the date of depreciation;

b

in the case of compensation payable under paragraph 22(c), 22(d) or 22(e), the date on which the loss is sustained, the damage is done, or the injurious affection occurs, as the case may be;

c

in the case of compensation payable under paragraph 25(6), the date on which the expenses become payable.

3

If it appears to a person that he may become liable to pay to another compensation under this Schedule or interest under this paragraph he may, if the other person requests him in writing to do so, make one or more payments on account of such compensation or interest.

4

If, after a payment has been made by a person under sub-paragraph (3)—

a

it is agreed or determined that he is not liable to pay compensation or interest; or

b

by reason of any agreement or determination, a payment under that sub-paragraph is shown to be excessive,

the payment or excess, as the case may be, is recoverable by that person.

SCHEDULE 6Appeals to the appropriate authority

Regulations 31(5) and 62(5)

Interpretation1

In this Schedule—

“appeal” means an appeal to the appropriate authority;
“appointed person” means the person appointed under paragraph 5;
“determination” includes the reasons for the determination.

Making an appeal2

1

A person who wants to make an appeal must—

a

send the appropriate authority written notice of the appeal and the documents specified in sub-paragraph (2); and

b

at the same time send the regulator copies of the notice and documents.

2

The documents are—

a

a statement of the grounds of appeal;

b

a copy of any relevant application;

c

a copy of any relevant environmental permit;

d

a copy of any relevant correspondence between the appellant and the regulator;

e

a copy of any decision or notice which is the subject matter of the appeal; and

f

a statement indicating whether the appellant wishes the appeal to be in the form of a hearing or dealt with by way of written representations.

3

An appellant may withdraw an appeal by notifying the appropriate authority in writing and must send a copy of that notification to the regulator.

Time limit for making an appeal3

1

A notice of appeal must be given—

a

in relation to an appeal against a revocation notice, before the notice takes effect;

b

in relation to the withdrawal of a duly-made application under paragraph 4(2) of Schedule 5, not later than 15 working days from the date of the notice served under that paragraph;

c

in relation to a variation notification, a suspension notice, an enforcement notice or a landfill closure notice, not later than 2 months from the date of the notification or notice;

d

in any other case not later than 6 months from the date of the decision or deemed decision.

2

The appropriate authority may in a particular case allow notice of appeal to be given after the periods mentioned in sub-paragraph (1)(b) or (c) have expired.

3

In this paragraph “variation notification” means notification of a decision to vary an environmental permit given under paragraph 17(2) of Schedule 5.

Notice to affected and interested persons4

1

The regulator must, within 10 working days of receipt of a copy of a notice of appeal, give notice of it to any person who in the regulator's opinion is affected by, is likely to be affected by, or has an interest in, the subject matter of the appeal.

2

A notice must include—

a

a description of the subject matter of the appeal; and

b

a statement that representations in writing may be made to the appropriate authority within a period of 15 working days beginning with the date of the notice.

3

The regulator must notify the appropriate authority of the persons to whom, and the date on which, such a notice was sent, within 10 working days of sending it.

4

The regulator must give notice of the withdrawal of an appeal to every person given such a notice.

2

If a hearing is held or reopened under sub-paragraph (1)(c), paragraphs 5(2) to 5(6) apply as they apply to a hearing held under paragraph 5(1).

3

Paragraph 6 applies to the re-determination of an appeal as it applies to the determination of that appeal.

SCHEDULE 7Provision in relation to Part A installations and Part A mobile plant

Regulation 35(a)

Application1

This Schedule applies in relation to every Part A installation and Part A mobile plant.

Interpretation2

When interpreting the IPPC Directive for the purposes of this Schedule—

a

d

Article 12;

e

Article 14 second indent;

f

Article 18(2).

2

But when interpreting the IPPC Directive for the purposes of this paragraph, the regulator must—

a

ignore the second and fourth paragraphs of Article 9(3);

b

in the case of Part A mobile plant, in Article 9(4), ignore the words “its geographical location and the local environmental conditions”;

c

ignore the second paragraph of Article 9(5);

d

ignore the second paragraph of Article 9(6); and

e

in the case of Part A mobile plant, ignore Article 12.

Public participation6

1

The regulator must exercise its functions under the public participation provisions in relation to Part A installations so as to meet the requirements of Article 15(1) of the IPPC Directive.

2

In this paragraph, “public participation provisions” means regulations 26, 29 and 59, and paragraphs 6 and 8 of Schedule 5.

Review of environmental permits7

The regulator must review an environmental permit if any of the circumstances in Article 13(2) of the IPPC Directive apply in relation to the Part A installation or Part A mobile plant it authorises.

Developments in best available techniques8

1

The regulator must follow developments in best available techniques.

2

In this paragraph, “best available techniques” has the meaning given in Article 2(11) of the IPPC Directive.

SCHEDULE 8Provision in relation to Part B installations and Part B mobile plant

Regulation 35(b)

Application1

This Schedule applies in relation to every Part B installation and Part B mobile plant.

Interpretation2

When interpreting the IPPC Directive for the purposes of this Schedule—

a

except where otherwise defined in this paragraph, an expression defined in Part 1 of these Regulations has the meaning given in that Part;

b

“installation” means “Part B installation or Part B mobile plant”;

c

“permit” means “environmental permit”;

d

a reference to “emission limit values” must be read as a reference to those values which are relevant to air pollution;

e

the competent authority is the regulator.

Exercise of regulator's functions: general3

The regulator must exercise its functions under these Regulations for the purpose of preventing or, where that is not practicable, reducing emissions into the air.

Applications for an environmental permit4

1

The regulator must ensure that every application for an environmental permit includes the information specified in Article 6(1) of the IPPC Directive.

2

But, when interpreting Article 6(1), the regulator must—

a

ignore the second, fourth and seventh indents;

b

ignore the third and fifth indents to the extent that a Part B installation carries on dry cleaning;

c

in the fifth indent, the reference to “each medium” must be read as a reference to “air”;

d

ignore the sixth indent to the extent that a Part B installation carries on the burning of waste oil in an appliance with a rated thermal input of less than 0.4 megawatts;

e

in the eighth indent, read the reference to “Article 3” as a reference to “Article 3 (a) and (b)”.

3

In this paragraph “dry cleaning” has the meaning given in Part B of Section 7 of Part 2 of Schedule 1.

Exercise of relevant functions5

1

The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the IPPC Directive—

a

Article 3 (a) and (b);

b

Article 9(1) to (4);

c

Article 10;

d

Article 12;

e

Article 18(2).

2

But when interpreting the IPPC Directive for the purposes of this paragraph, the regulator must—

a

in Article 3, ignore the words “provide that the competent authorities”;

b

in Article 9(1) read—

i

the reference to “Article 3” as a reference to “Article 3 (a) and (b)”, and

ii

the words from “in order” to the end of the Article as “for the purpose of preventing or, where that is not practicable, reducing emissions into the air.”;

c

in Article 9(3), ignore the words “and their potential to transfer pollution from one medium to another (water, air and land)”;

d

in Article 9(4)—

i

in the case of Part B mobile plant, ignore the words “its geographical location and the local environmental conditions”, and

ii

ignore the last sentence;

e

in the case of Part B mobile plant, ignore Article 12;

f

in Annex III, ignore the section headed “WATER”.

Review of environmental permits6

The regulator must review an environmental permit if any of the circumstances in Article 13(2) of the IPPC Directive apply in relation to the Part B installation or Part B mobile plant it authorises.

Developments in best available techniques7

1

The regulator must follow developments in best available techniques.

2

In this paragraph, “best available techniques” has the meaning given in Article 2(11) of the IPPC Directive, save that the reference to “Annex IV” in that Article must be read as a reference to “paragraphs 4 to 8 of Annex IV”.

SCHEDULE 9Provision in relation to waste operations

Regulation 35(c)

Application1

This Schedule applies in relation to every waste operation.

is not the activity which constitutes the primary purpose for operating the installation.

Exercise of relevant functions: all waste operations3

The regulator must exercise its relevant functions—

a

for the purposes of implementing Article 4 of the Waste Framework Directive; and

b

so as to ensure that the records referred to in Article 14 of the Waste Framework Directive are kept and made available to the regulator on request.

Exercise of relevant functions: disposal of waste4

1

The regulator must exercise its relevant functions in relation to disposal of waste—

a

for the purposes of implementing Article 5 of the Waste Framework Directive, ignoring the words “in cooperation with other Member States where this is necessary or advisable”;

b

for the purposes of implementing, so far as material, any waste management plan; and

c

so as to ensure that the requirements in the second pragraph of Article 9(1) of the Waste Framework Directive are met.

2

In this paragraph, “waste management plan” has the meaning given in Schedule 20.

SCHEDULE 10Provision in relation to landfill

Regulation 35(d)

Application1

This Schedule applies in relation to every landfill except—

a

in relation to an operation mentioned in Article 3(2) of the Landfill Directive; or

b

a landfill which finally ceased to accept waste for disposal before 16th July 2001.

Interpretation: general2

1

In this Schedule—

a

except where otherwise defined in Part 1 of these Regulations, an expression defined in the Landfill Directive has the meaning given in that Part;

b

“the Decision” means Council Decision 2003/33/ECM95;

c

“the Decision Annex” means the Annex to the Decision.

2

When interpreting the Landfill Directive and the Decision for the purposes of this Schedule—

a

an expression defined in Part 1 of these Regulations has the meaning given there;

b

“landfill permit” means environmental permit;

c

“nature protection zone” means any—

i

site of special scientific interest within the meaning given by section 52 of the Wildlife and Countryside Act 1981 M96, or

ii

European site within the meaning given by regulation 10(1) of the Conservation (Natural Habitats, &c) Regulations 1994 M97;

d

“PAHs (polycyclic aromatic hydrocarbons)” means Napthalene, Acenaphthylene, Acenaphthene, Anthracene, Benzo(a)anthracene, Benzo(b)fluoranthene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene, Chrysene, Coronene, Dibenzo(a,h)anthracene, Fluorene, Fluoranthene, Indeno(1,2,3-c,d)pyrene, Phenanthrene and Pyrene;

e

“permit” means environmental permit;

f

“SIC code” means a code included in “The United Kingdom Standard Industrial Classification of Economic Activities 2003”, published by the Office for National Statistics on 31st December 2002 and implemented on 1st January 2003 M98;

g

the competent authority is the regulator.

Applications for an environmental permit3

The regulator must require that every application for an environmental permit includes the information specified in Article 7 of the Landfill Directive.

Inspection prior to operation4

The regulator must inspect every landfill site so as to comply with the requirements in Article 8(c) of the Landfill Directive.

point 2.4.2 must be read as if, in addition to the criteria listed, it requires the satisfaction of the criteria in paragraph (a)(i) and (a)(ii).

Interpretation of the Decision Annex for the exercise of relevant functions: additional acceptance criteria in relating to monolithic waste9

When interpreting the Decision Annex for the purposes of paragraph 5(3)—

a

point 2.3.1 must be read as if, in addition to the criteria listed, it requires the satisfaction of the following criteria in relation to stable, non-reactive monolithic hazardous waste and non-hazardous waste which is to be landfilled in the same cell with such waste—

i

it meets either—

aa

the limit values for leaching set out in the table in point 2.3.1, or

bb

the limit values for leaching set out in the following table—

Component	Symbol	mg/m²
Arsenic	As	1.3
Barium	Ba	45
Cadmium	Cd	0.2
Total Chromium	Cr_total	5
Copper	Cu	45
Mercury	Hg	0.1
Molybdenum	Mo	7
Nickel	Ni	6
Lead	Pb	6
Antimony	Sb	0.3
Selenium	Se	0.4
Zinc	Zn	30
Chloride	Cl^�??	10,000
Fluoride	F^�??	60
Sulphate	SO₄^2�??	10,000
Dissolved Organic Carbon	DOC	Must be evaluated

ii

it meets the additional criteria set out in the following table—

Parameter	Value
pH of the eluate from the monolith or crushed monolith	Must be evaluated
Electrical conductivity (μ S.cm-1m-2) of the eluate from the monolith or crushed monolith	Must be evaluated
Acid Neutralisation Capacity (ANC) of the crushed monolith	Must be evaluated

Components	Symbol	mg/m²¹
Arsenic	As	20
Barium	Ba	150
Cadmium	Cd	1
Total Chromium	Cr_total	25
Copper	Cu	60
Mercury	Hg	0.4
Molybdenum	Mo	20
Nickel	Ni	15
Lead	Pb	20
Antimony	Sb	2.5
Selenium	Se	5
Zinc	Zn	100
Chloride	Cl^�??	20,000
Fluoride	F^�??	200
Sulphate	SO₄^2�??	20,000
Dissolved Organic Carbon	DOC	Must be evaluated
¹ The regulator may include conditions in an environmental permit authorising limit values for specific parameters (other than Dissolved Organic Carbon) up to three times higher for specified wastes accepted in a landfill, taking into account the characteristics of the landfill and its surroundings and provided a risk assessment demonstrates that emissions (including leachate) from the landfill will present no additional risk to the environment.

Closure of a landfill10

1

The regulator must set out any reasoned decision under Article 13(a)(iii) of the Landfill Directive in a closure notice served on the operator.

2

A closure notice must, in addition to stating the regulator's reasons for requiring initiation of the closure procedure,—

a

specify the steps the operator is required to take to initiate the procedure; and

b

the period within which they must be taken.

3

The regulator may withdraw a closure notice at any time by further notice served on the operator.

4

Closure of a landfill does not relieve the operator of liability under the conditions of the environmental permit.

Surrender applications11

When determining an application to surrender an environmental permit in whole or in part in relation to a landfill the regulator must exercise its functions so as to ensure the operator complies with the requirements in Article 13(d) of the Landfill Directive.

SCHEDULE 11Provision in relation to waste motor vehicles

Regulation 35(e)

Application1

This Schedule applies in relation to waste motor vehicles.

Interpretation2

1

In this Schedule—

“waste” means waste within the meaning of Article 1(a) of the Waste Framework Directive;
“waste motor vehicle” means a motor vehicle that is waste.

2

When interpreting the End-of-Life Vehicles Directive for the purposes of this Schedule—

a

except where otherwise defined in this paragraph, an expression defined in Part 1 of these Regulations has the meaning given in that Part;

b

“end-of-life vehicle” means waste motor vehicle;

c

“vehicle” means any motor vehicle;

d

“waste” means waste within the meaning of Article 1(a) of the Waste Framework Directive.

Exercise of relevant functions3

1

The regulator must exercise its relevant functions so as to ensure compliance with Article 6(1) and (3) of the End-of-Life Vehicles Directive.

2

When interpreting the End-of-Life Vehicles Directive for the purposes of this paragraph, “establishment or undertaking” must be read as “operator”.

SCHEDULE 12Provision in relation to waste electrical and electronic equipment

Regulation 35(f)

Application1

This Schedule applies in relation to waste electrical and electronic equipment which is within the scope of the WEEE Directive by virtue of Article 2 of that Directive.

Interpretation2

1

In this Schedule, “waste electrical and electronic equipment” has the meaning given in Article 3(b) of the WEEE Directive.

2

When interpreting the WEEE Directive for the purposes of this Schedule—

a

an expression defined in Part 1 of these Regulations has the meaning given in that Part;

b

“permit” means environmental permit;

c

“waste” means waste within the meaning of Article 1(a) of the Waste Framework Directive.

Exercise of relevant functions3

1

The regulator must exercise its relevant functions so as to ensure compliance with Article 6(1) first paragraph, (3) and (4) of the WEEE Directive.

2

But when interpreting the WEEE Directive for the purposes of this paragraph, ignore the following words in Article 6(4)—

a

“or the registration referred to in paragraph 2”; and

b

“and for the achievement of the recovery targets set out in Article 7”.

SCHEDULE 13Provision in relation to waste incineration

Regulation 35(g)

Application1

This Schedule applies in relation to every waste incineration installation.

Interpretation2

1

In this Schedule, “waste incineration installation” means that part of an installation or mobile plant in which any of the following activities is carried out—

a

the incineration of waste falling within the following provisions of Section 5.1 of Part 2 of Schedule 1—

i

sub-paragraphs (a) to (c) of Part A(1), or

ii

sub-paragraphs (a) or (b) of Part A(2); or

b

any other activity falling within Part 2 of Schedule 1 which is carried out in a co-incineration plant (as that term is defined in Section 5.1 of Part 2 of Schedule 1).

2

When interpreting the Waste Incineration Directive for the purposes of this Schedule—

a

an expression defined in Section 5.1 of Part 2 of Schedule 1 has the meaning given in that Section;

b

except where also defined in Section 5.1 of Part 2 of Schedule 1, an expression defined in Part 1 of these Regulations has the meaning given that Part;

c

“permit” means environmental permit;

d

the competent authority is the regulator.

Applications for an environmental permit3

The regulator must require that every application for an environmental permit includes the information specified in Article 4(2) of the Waste Incineration Directive.

Exercise of relevant functions4

1

The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Waste Incineration Directive—

a

Article 4(3) to 4(5);

b

Article 5;

c

Article 6, except the last indent of 6(4);

d

Article 7(1) to 7(4);

e

Article 8(1) to 8(7);

f

Article 9;

g

Article 10;

h

Article 11, except for 11(1) and 11(13);

i

Article 12(2), to the extent that it relates to the provision of annual reports by the operator;

j

Article 13.

2

But when interpreting the Waste Incineration Directive for the purposes of this paragraph—

a

in Article 6(4), ignore the words “Member States may lay down rules governing these authorisations” in both places they occur;

b

in Article 11(1), ignore the words “either” and “or by general binding rules”;

c

Article 11(2)(c) must be read as if the words “and dioxin-like polychlorinated biphenyls and poly-cyclic aromatic hydrocarbons” appeared after the word “furans”; and

d

Annex V must be read as if every reference to an exemption which “may” be authorised by the competent authority was to an exemption which “must” be authorised by the competent authority.

SCHEDULE 14Provision in relation to SED installations

Regulation 35(h)

Application1

This Schedule applies in relation to every SED installation.

Interpretation2

1

In this Schedule, “the Solvent Emissions Directive” means Council Directive 1999/13/EC on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain activities and installations M99.

2

When interpreting the Solvent Emissions Directive for the purposes of this Schedule—

a

an expression defined in Section 7 of Part 2 of Schedule 1 has the meaning given that Section;

b

except where also defined in that Section or in this paragraph, an expression defined in Part 1 of these Regulations has the meaning given in that Part;

c

“authorisation” means environmental permit;

d

“emission” has the meaning given in the Solvent Emissions Directive;

e

“installation” means SED installation;

f

the competent authority is the regulator.

Exercise of relevant functions3

1

The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Solvent Emissions Directive—

a

Article 4(4);

b

Article 5, except for the last sentence of 5(3), and 5(13);

c

Article 7(2);

d

Article 8(1) to 8(4);

e

Article 9;

f

Article 10.

2

When interpreting the Solvent Emissions Directive for the purposes of this paragraph—

a

in Article 5(1), ignore the words “either” and “or by general binding rules”;

b

in Article 7(2), ignore the words “and during the formulation of general binding rules”;

c

in point 1 of Annex IIB, ignore the last sentence.

SCHEDULE 15Provision in relation to certain combustion plants

Regulation 35(i)

Application1

This Schedule applies in relation to every combustion plant to which the Large Combustion Plants Directive applies by virtue of Article 1 of that Directive.

Interpretation2

1

In this Schedule—

“combustion plant” has the meaning given in Article 2(7) of the Large Combustion Plants Directive;
“existing plant” has the meaning given in Article 2(10) of the Large Combustion Plants Directive; and
“the Large Combustion Plants Directive” means Directive 2001/80/EC of the European Parliament and of the Council on the limitation of emissions of certain pollutants into the air from large combustion plants M100.

2

When interpreting the Large Combustion Plants Directive for the purposes of this Schedule—

a

except where also defined in this paragraph, an expression defined in Part 1 of these Regulations has the meaning given in that Part;

b

the competent authority is—

i

for the purposes of exercising a judgment of whether there is an overriding need to maintain energy supplies under Article 7(1) or 7(3) of the Large Combustion Plants Directive, the appropriate authority,

ii

otherwise, the regulator;

c

the national emission reduction plan referred to in Article 4(6) of the Large Combustion Plants Directive is the emission plan, as amended from time to time, published under regulation 4(1) of the Large Combustion Plants (National Emission Reduction Plan) Regulations 2007 M101;

d

“emission” has the meaning given in the Large Combustion Plants Directive;

e

“licence” means environmental permit;

f

“permit” means environmental permit; and

g

in Article 4(4), ignore the words “and from their inclusion in the national emission reduction plan”.

Exercise of relevant functions3

1

The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Large Combustion Plants Directive—

a

Article 4(1), (2) and (4);

b

Article 5(1);

c

Article 6;

d

Article 7, except the last sentence of 7(2) and the last sentence of 7(3);

e

Article 8;

f

Article 9;

g

Article 10;

h

Article 12;

i

Article 13;

j

Article 14(1), 14(2) and 14(4).

2

The regulator must—

a

exercise its relevant functions in relation to a regulated facility which—

i

is an existing plant, and

ii

elects to comply with the emission limit values established under Article 4(1) of the Large Combustion Plants Directive,

so as to ensure compliance with Article 4(3)(a) of that Directive; and

b

exercise its relevant functions in relation to a regulated facility which is included in the national emission reduction plan referred to in Article 4(6) of the Large Combustion Plants Directive so as to ensure compliance with Article 4(3)(b) of that Directive, to the extent that such compliance is not ensured by the Large Combustion Plants (National Emission Reduction Plan) Regulations 2007 M102.

3

e

Article 8.

2

When interpreting the Asbestos Directive for the purposes of this paragraph, in Article 6(1), “regular intervals” means, for the purposes of a regulated facility to which Article 4 applies, intervals of not more than 6 months.

SCHEDULE 17Provision in relation to titanium dioxide

Regulation 35(k)

Application1

This Schedule applies in relation to every regulated facility which carries on the chlorine process or the sulphate process.

Interpretation2

1

In this Schedule—

“the Titanium Dioxide Directive” means Council Directive 92/112/EEC on procedures for harmonizing the programmes for the reduction and eventual elimination of pollution caused by waste from the titanium dioxide industry M104; and
“chlorine process” and “sulphate process” have the same meanings as they have in Article 2 of the Titanium Dioxide Directive.

2

When interpreting the Titanium Dioxide Directive for the purposes of this Schedule, an expression defined in Part 1 of these Regulations has the meaning given in that Part.

Exercise of relevant functions3

The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Titanium Dioxide Directive—

a

Article 4;

b

Article 6;

c

Article 9;

d

Article 10;

e

Article 11.

SCHEDULE 18Provision in relation to petrol vapour recovery

Regulation 35(l)

Application1

This Schedule applies in relation to every activity within sub-paragraphs (c) and (d) of Part B of Section 1.2 of Chapter 1 of Part 2 of Schedule 1.

Interpretation2

In this Schedule, “the Petrol Vapour Recovery Directive” means European Parliament and Council Directive 94/63/EC on the control of volatile organic compound (VOC) emissions resulting from the storage of petrol and its distribution from terminals to service stations M105.

Exercise of relevant functions3

1

The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Petrol Vapour Recovery Directive—

a

Article 3(1), first paragraph;

b

Article 4(1), first and last paragraphs, and 4(3);

c

Article 6(1), first paragraph.

2

When interpreting the Petrol Vapour Recovery Directive for the purposes of this paragraph—

a

in point 1 of Annex I, “special landscape areas which have been designated by national authority” includes the Broads, the New Forest and any National Park or Area of Outstanding Natural Beauty; and

b

ignore points 2.3, 3.2 and 3.5 of Annex IV.

F4SCHEDULE 18AProvision in relation to waste batteries and accumulators

Regulation 35(m)

Annotations:

Amendments (Textual)

Sch. 18A inserted (5.5.2009) by The Waste Batteries and Accumulators Regulations 2009 (S.I. 2009/890), reg. 1(2), Sch. 8 para. 2(6)

Application1

This Schedule applies in relation to waste batteries and accumulators.

Exercise of relevant functions2

The regulator must exercise its relevant functions so as to ensure compliance with Article 12(2) of the Batteries Directive.

SCHEDULE 19Public registers

Regulation 46(1)

Regulation 68(3)

Interpretation: general1

In this Schedule—

“authority” means—
1. a
  an appropriate authority,
2. b
  the Agency,
3. c
  a planning authority,
4. d
  a person appointed under section 114(1)(a) of the 1995 Act M106;
“local planning authority” has the same meaning as in the Town and Country Planning Act 1990 M107;
“planning authority” means—
1. a
  a local planning authority,
2. b
  a joint committee constituted under section 29 of the Planning and Compulsory Purchase Act 2004 M108,
3. c
  the person appointed under paragraph 1 of Schedule 6 to the Town and Country Planning Act 1990 M109,
4. d
  a government department in respect of its functions under the planning Acts, or
5. e
  the Secretary of State in respect of his functions under the planning Acts;
“plan making provisions” means—
1. a
  paragraph 5 of Schedule 4 to the 1994 Regulations,
2. b
  Part 2 of the Town and Country Planning Act 1990 M110,
3. c
  section 44A of the 1990 Act M111,
4. d
  in England, Parts 1 and 2 and Schedule 8 of the Planning and Compulsory Purchase Act 2004, and
5. e
  in Wales—
  1. i
    Part 6 of the Planning and Compulsory Purchase Act 2004,
  2. ii
    article 3(3) of the Planning and Compulsory Purchase Act 2004 (Commencement No. 6, Transitional Provisions and Savings) Order 2005 M112;
“the planning Acts” means—
1. a
  the Town and Country Planning Act 1990,
2. b
  the Planning (Listed Buildings and Conservation Areas) Act 1990 M113,
3. c
  the Planning (Hazardous Substances) Act 1990 M114,
4. d
  the Planning (Consequential Provisions) Act 1990 M115, and
5. e
  the Planning and Compulsory Purchase Act 2004;
“planning permission” has the meaning given by section 336 of the Town and Country Planning Act 1990 M116;
“pollution control authority” means an authority other than a planning authority;
“specified functions” has the meaning given in paragraph 2;
“waste management plan” means a plan or other expression of strategy or policy in relation to waste management made under the plan making provisions.

in making or confirming a discontinuance order, to include in the order any grant of planning permission, or

bb

to confirm (with or without modifications) a discontinuance order insofar as it grants planning permission,

and for the purposes of this sub-paragraph, “discontinuance order” means an order under section 102 of the Town and Country Planning Act 1990 (including an order made under that section by virtue of section 104 of that Act), or under paragraph 1 of Schedule 9 to that Act (including an order made under that paragraph by virtue of paragraph 11 of that Schedule) M123,

v

making a local development order under section 61A of the Town and Country Planning Act 1990 M124, and

vi

discharging functions under Part II of the Town and Country Planning Act 1990, under parts 1 and 2 of and Schedule 8 to the Planning and Compulsory Purchase Act 2004 in relation to England or under part 6 of and Schedule 8 to the Planning and Compulsory Purchase Act 2004 in relation to Wales.

2

But a function which must be discharged by statutory instrument is not a specified function.

Exercise of specified functions: all waste operations3

1

Every authority must exercise its specified functions in relation to waste operations—

a

for the purposes of implementing Article 4 of the Waste Framework Directive; and

b

when exercising a function under the plan making provisions, for the purposes of implementing Article 3(1) of the Waste Framework Directive.

2

Every authority, other than a planning authority, must exercise its specified functions in relation to waste operations so as to ensure that the records referred to in Article 14 of the Waste Framework Directive are kept and made available to the authority on request.

Exercise of specified functions: disposal of waste4

1

Every authority must exercise its specified functions in relation to disposal of waste—

a

for the purposes of implementing Article 5 of the Waste Framework Directive, ignoring the words “in cooperation with other Member States where this is necessary or advisable”;

b

for the purposes of implementing, so far as material, any waste management plan.

2

Every pollution control authority must exercise its specified functions in relation to disposal of waste so as to ensure that the requirements in the second paragraph of Article 9(1) of the Waste Framework Directive are met.

Periodic inspections5

Every authority must make appropriate periodic inspections of every establishment or undertaking carrying on a waste operation in relation to which it is required to exercise its specified functions under paragraph 3 or 4.

Requirements applying to planning authorities6

1

Nothing in paragraph 3 or 4 requires a planning authority to deal with a matter which the relevant pollution control authority has power to deal with.

2

A planning authority must not grant planning permission for a landfill unless it has taken the requirements of paragraph 1.1 of Annex 1 of the Landfill Directive into consideration.

SCHEDULE 21Consequential amendments

Regulation 73

PART 1Public General Acts

Public Health Act 19611

In section 34(5) of the Public Health Act 1961 M125, omit the words “or waste deposited in accordance with a disposal licence in force under Part I of the Control of Pollution Act 1974”.

Environmental Protection Act 19902

The Environmental Protection Act 1990 M126 is amended (in relation to England and Wales) in accordance with paragraphs 3 to 18.

3

1

Section 29 M127 is amended as follows.

2

In subsection (9), omit the words “, subject to subsection (10) below,”.

3

Omit subsection (10).

4

After subsection (11), add—

12
“The 2007 Regulations” means the Environmental Permitting (England and Wales) Regulations 2007.
13
The following expressions have the same meaning as in the 2007 Regulations—
“environmental permit”;
“exempt waste operation”;
“waste operation”.

4

1

Section 33 M128 is amended as follows.

2

In subsection (1)—

a

for “subsection (2) and (3) below” substitute “ subsections (1A), (1B), (2) and (3) below ”;

b

in paragraph (a), for “a waste management licence” substitute “ an environmental permit ”, and for “the licence” substitute “ the permit ”;

c

for paragraph (b), substitute—

b
submit controlled waste, or knowingly cause or knowingly permit controlled waste to be submitted, to any listed operation (other than an operation within subsection (1)(a)) that—
i
is carried out in or on any land, or by means of any mobile plant, and
ii
is not carried out under and in accordance with an environmental permit.

3

After subsection (1), insert—

1A
Paragraphs (a) and (b) of subsection (1) above do not apply in relation to a waste operation that is an exempt waste operation.
1B
Subsection (1) does not apply in relation to the carrying on of any of the following activities—
a
the disposal of liquid waste under a consent under Chapter 2 of Part 3 of the Water Resources Act 1991;
b
a waste operation which is or forms part of an operation which—
i
is the subject of a licence under Part 2 of the Food and Environment Protection Act 1985; or
ii
by virtue of an order under section 7 of that Act, does not require such a licence;
c
the disposal of agricultural waste in or on land under an authorisation under regulation 18 of the Groundwater Regulations 1998.

4

In subsection (4) for “the controls imposed by waste management licences” substitute “ the prohibitions in subsection (1) ”.

5

In subsection (6) omit the words “or any condition of a waste management licence”.

6

After subsection (10), add—

11
For the purposes of subsection (1)(a) above, the deposit of waste in or on land includes any listed operation involving such a deposit.
12
For the purposes of subsection (1)(c) above, treating, keeping or disposing of controlled waste includes submitting it to any listed operation.
13
For the purposes of this section, a “listed operation” is an operation listed in Annex IIA or IIB of Directive 2006/12/EC of the European Parliament and of the Council on waste

5

For section 33A(1) M129, substitute—

1
This section applies where a person is convicted of an offence—
a
under section 33 above, in respect of a contravention of subsection (1) of that section;
b
under regulation 38(1)(a) of the 2007 Regulations, in respect of a waste operation.

6

For section 33B(1) M130, substitute—

1
This section applies where a person is convicted of an offence—
a
under section 33 above, in respect of a contravention of subsection (1) of that section consisting of the deposit or disposal of controlled waste;
b
under regulation 38(1)(a) of the 2007 Regulations, in respect of a contravention of regulation 12 of those Regulations consisting of the disposal of waste.

7

1

For section 33C(1) M131, substitute—

1
This section applies where—
a
subject to subsection (1A) below, a person is convicted of an offence under section 33 above in respect of a contravention of subsection (1) of that section consisting of the deposit or disposal of controlled waste;
b
a person is convicted of an offence under regulation 38(1)(a) of the 2007 Regulations in respect of a contravention of regulation 12 of those Regulations consisting of the disposal of waste.

2

In section 33C(7)(d), after “section 33 above,” insert “ or regulation 38(1)(a) or 38(1)(b) of the 2007 Regulations, ”.

8

1

Section 34 M132 is amended as follows.

2

For subsection (1)(aa) substitute—

aa
to prevent any contravention by any other person of regulation 12 of the 2007 Regulations or of a condition of an environmental permit;

3

In subsection (1)(c)(ii) for “or any condition of a permit granted under regulation 10 of those Regulations” substitute “ or regulation 12 of the 2007 Regulations, or a contravention of a condition of an environmental permit, ”.

4

For subsection (3)(b) substitute—

b
any person who is the holder of an environmental permit in relation to a waste operation;

5

After subsection (3)(b), insert—

ba
any person who is carrying on an exempt waste operation;

9

In section 34B M133—

a

in subsection (2)(a) after “committed” insert “ , or an offence under regulation 38(1)(a) or (b) of the 2007 Regulations has been committed in relation to a waste operation ”;

b

in subsection (3)(a) before “and” insert “ or an offence under regulation 38(1)(a) or (b) of the 2007 Regulations is being or is about to be committed in relation to a waste operation, ”.

10

Omit sections 35 to 43.

11

In section 44 M134—

a

in subsection (1)(a), omit “or”;

b

omit subsections (1)(b) and (2).

12

In section 44A M135, after subsection (8), insert—

8A
The Environment Agency shall publicise any direction given to it under subsection (6) above in such manner as it considers appropriate.

13

In section 57 M136—

a

in subsection (1) for “waste management licence or waste permit” substitute “ environmental permit authorising a waste operation ”;

b

omit subsection (7A).

14

In section 59 M137—

a

in subsection (1) after “section 33(1) above” insert “ or regulation 12 of the 2007 Regulations ”;

b

in subsection (7) after “section 33(1) above” insert “ or regulation 12 of the 2007 Regulations, ”.

15

In section 59ZA(2) M138 after the words “section 33(1) above” add “ or regulation 12 of the 2007 Regulations, ”.

16

In section 59A M139, after subsection (3), insert—

4
A waste regulation authority shall publicise any direction given to it under subsection (1) above in such manner as it considers appropriate.

17

Omit sections 64 to 66, 74 and 77.

18

In section 78YB M140—

a

for subsections (1) to (2C) substitute—

1
This Part shall not apply if and to the extent that—
a
any significant harm, or pollution of controlled waters, by reason of which land would otherwise fall to be regarded as contaminated, is attributable to the operation of a regulated facility; and
b
enforcement action may be taken in relation to that harm or pollution.

b

at the end, insert—

5
In this section—
“enforcement action” means action under regulation 36, 37 or 42 of the Environmental Permitting (England and Wales) Regulations 2007;
“regulated facility” has the meaning given in regulation 8 of those Regulations.

Town and Country Planning Act 199019

In section 336(1) of the Town and Country Planning Act 1990 M141, after the definition of “war damage”, insert—

“waste” includes anything that is waste for the purposes of Directive 2006/12/EC of the European Parliament and of the Council on waste, and that is not excluded from the scope of that Directive by Article 2(1) of that Directive;

Water Industry Act 199120

1

Section 138 of the Water Industry Act 1991 M142 is amended as follows.

2

In subsection (1A), for the words “any installation or plant or otherwise carrying on any activity”, substitute “ any Part A installation or Part A mobile plant or otherwise carrying on any Part A activity ”.

3

In subsection (1B)(a) for the words “regulations under section 2 of the Pollution Prevention and Control Act 1999” substitute “ the Environmental Permitting (England and Wales) Regulations 2007 (“the 2007 Regulations”) ”.

4

After subsection (1B)(a), insert—

aa
the expressions “Part A activity”, “Part A installation” and “Part A mobile plant” have the same meaning as in the 2007 Regulations;

5

In subsection (1B)(b) for the words from “granted” to the end, substitute “ granted under the 2007 Regulations ”.

Water Resources Act 199121

1

The Water Resources Act 1991 M143 is amended as follows.

2

In sections 85(1), 91(2G)(a), 161(1), 161A(1) and 203(6)(b) omit the word “solid”.

3

After section 85(6) insert—

7
For the purposes of subsection (1) “waste”, in the term “waste matter” includes anything that is waste for the purposes of Directive 2006/12/EC of the European Parliament and of the Council of 5 April 2006 on Waste M144, and that is not excluded from the scope of that Directive by Article 2(1) of that Directive.

4

In section 88—

a

omit subsection (1)(aa);

b

for subsection (1)(c), substitute—

c
a permit granted under the Environmental Permitting (England and Wales) Regulations 2007, except insofar as it authorises a Part B activity within the meaning of those Regulations;

c

omit subsection (3);

d

in subsection (4)—

i

omit the definition of “disposal licence”;

ii

omit the definition of “waste management licence” and the word “and” immediately preceding it.

5

In section 91, after subsection (8), insert—

9
In this section, “waste” has the meaning given in section 85(7).

6

In section 161B, for subsection (6), substitute—

6
Without prejudice to the generality of the regulations that may be made by virtue of subsection (5), regulations by virtue of that subsection may—
a
provide for the basis on which any amount to be paid by way of compensation under this section is to be assessed;
b
without prejudice to the generality of paragraph (a) above, provide for compensation under this section to be payable in respect of—
i
any effect of any rights being granted, or
ii
any consequence of the exercise of any rights which have been granted;
c
provide for the times at which any entitlement to compensation under this section is to arise or at which any such compensation is to become payable;
d
provide for the persons or bodies by whom, and the manner in which, any dispute—
i
as to whether any, and (if so) how much and when, compensation under this section is payable, or
ii
as to the person to or by whom it shall be paid,
is to be determined;
e
provide for when or how applications may be made for compensation under this section;
f
without prejudice to the generality of paragraph (d) above, provide for when or how applications may be made for the determination of any such disputes as are mentioned in that paragraph;
g
without prejudice to the generality of paragraphs (e) and (f) above, prescribe the form in which any such applications as are mentioned in those paragraphs are to be made;
h
make provision similar to any provision made by paragraph 8 of Schedule 19;
i
make different provision for different cases, including different provision in relation to different persons or circumstances;
j
include such incidental, supplemental, consequential or transitional provision as the Secretary of State considers appropriate.

Clean Air Act 199322

1

Section 41A of the Clean Air Act 1993 M145 is amended (in relation to England and Wales) as follows.

2

After subsection (2)(b), insert—

c
in the case of an activity that is an exempt waste operation, the date of the entry on the register maintained under paragraph 4 of Schedule 2 to the 2007 Regulations of an establishment or undertaking in relation to that operation.

3

In subsection (3), after “subsection (2)” insert—

“exempt waste operation” has the meaning given in the 2007 Regulations;

4

After subsection (3), insert—

4
In this section—
“activity” includes a waste operation within the meaning of the 2007 Regulations;
“the 2007 Regulations” means the Environmental Permitting (England and Wales) Regulations 2007.

Environment Act 199523

1

The Environment Act 1995 M146 is amended (in relation to England and Wales) as follows.

2

In section 56(1), in the definition of “environmental licence”—

a

omit paragraph (c);

b

for paragraph (h) substitute—

h
registration of a person as a broker of controlled waste under any provision which gives effect in England and Wales to Article 12 of Directive 2006/12/EC of the European Parliament and of the Council on waste,

c

for paragraph (j) substitute—

j
registration under Schedule 2 to the Environmental Permitting (England and Wales) Regulations 2007 of an establishment or undertaking in relation to an operation which for the purposes of those Regulations is a notifiable exempt waste operation, or an exempt waste operation falling within paragraph 45(1) or 45(3) of Schedule 3 to those Regulations,

3

In Schedule 20, in paragraph 4(3), for paragraph (d) substitute—

d
regulation 53(1) of the Environmental Permitting (England and Wales) Regulations 2007,

Goods Vehicles (Licensing of Operators) Act 199524

1

Schedule 2 to the Goods Vehicles (Licensing of Operators) Act 1995 M147 is amended (in relation to England and Wales) as follows.

2

After paragraph 5(i) insert—

ia
an offence under regulation 38(1)(a) or 38(1)(b) of the Environmental Permitting (England and Wales) Regulations 2007 committed in relation to a waste operation (within the meaning of those Regulations).

Finance Act 199625

1

The Finance Act 1996 M148 is amended (in relation to England and Wales) as follows.

2

For section 43A(4)(h), (j) and (k) substitute—

h
an enforcement notice served under regulation 36 of the Environmental Permitting (England and Wales) Regulations 2007;
j
a suspension notice served under regulation 37 of those Regulations; or
k
an order under regulation 44 of those Regulations.

Pollution Prevention and Control Act 199926

Omit section 4 of the Pollution Prevention and Control Act 1999 M149.

Finance Act 200027

1

The Finance Act 2000 M150 is amended (in relation to England and Wales) as follows.

2

In the table in paragraph 51 of Schedule 6—

a

for the italic cross-heading “Installations regulated under the Pollution Prevention and Control (England and Wales) Regulations 2000 (SI 2000/1973)” substitute “ Installations regulated under the Environmental Permitting (England and Wales) Regulations 2007 ”;

b

for entry 5(1) substitute “ In this entry “the Schedule” means Schedule 1 to the Environmental Permitting (England and Wales) Regulations 2007. ”;

c

for entry 5(2)(a) substitute “ “Part A installation” has the meaning given in regulation 3(2) of the Environmental Permitting (England and Wales) Regulations 2007; ”;

d

in entries 5(2)(b), (c) and (d), for “Part 1 of the Schedule” substitute “ Part 2 of the Schedule ”;

e

for entry 5(2)(c)(iii) substitute “ paragraph 1 of the Interpretation and application of Part A(1) of Section 5.4; ”.

PART 2Subordinate legislation

The Regulations as to Cremation (1930)28

1

The definitions in the Regulations as to Cremation (1930) M151 are amended (in relation to England and Wales) as follows.

2

For the words “Schedule 1 to the Pollution Prevention and Control (England and Wales) Regulations 2000”, substitute “ Part 2 of Schedule 1 to the Environmental Permitting (England and Wales) Regulations 2007 ”.

3

For the definition of “Permit”, substitute—

“Permit” means an environmental permit granted under regulation 13(1) of the Environmental Permitting (England and Wales) Regulations 2007.

The Deposits in the Sea (Exemptions) Order 198529

In article 4(2) of the Deposits in the Sea (Exemptions) Order 1985 M152 for the words “regulation 1(3) of the Waste Management Licensing Regulations 1994”, substitute (in relation to England and Wales) “regulation 2(1) of the Environmental Permitting (England and Wales) Regulations 2007”.

The Radioactive Substances (Hospitals) Exemption Order 199030

For the definition of “site licence” in article 2(1) of the Radioactive Substances (Hospitals) Exemptions Order 1990 M153, substitute (in relation to England and Wales)—

“site licence” means an environmental permit under the Environmental Permitting (England and Wales) Regulations 2007;

The Controlled Waste (Registration of Carriers and Seizure of Vehicles) Regulations 199131

1

The Controlled Waste (Registration of Carriers and Seizure of Vehicles) Regulations 1991 M154 are amended (in relation to England and Wales) as follows.

2

In regulation 6—

a

in paragraph 1(g) for “a waste management licence or a disposal licence” substitute “ an environmental permit in respect of a waste operation under the Environmental Permitting (England and Wales) Regulations 2007 ” and for “the licence” substitute “ the permit ”;

b

in paragraph (4) omit the definitions of “waste management licence” and “disposal licence”.

3

To the end of the list in Schedule 1 add “the Environmental Permitting (England and Wales) Regulations 2007.”.

The Environmental Protection (Duty of Care) Regulations 199132

1

The Environmental Protection (Duty of Care) Regulations 1991 M155 are amended (in relation to England and Wales) as follows.

2

In regulation 1(2), after the definition of “the 1990 Act”, insert—

“the 2007 Regulations” means the Environmental Permitting (England and Wales) Regulations 2007

3

For the table in regulation 2(2), substitute—

TABLE
Category of person
Additional information
A waste collection authority for the purposes of Part II of the 1990 Act
The holder of an environmental permit in respect of a waste operation under the 2007 Regulations, excluding the holder of such a permit in respect of a Part A activity or Part B activity which is not a specified waste management activity within the meaning of paragraph 2 of Schedule 9 to those Regulations
If the waste is to be kept, treated or disposed of by that person, the relevant permit number and the name of the permitting regulator.
A person carrying on an exempt waste operation under the 2007 Regulations
A person carrying on an operation to which section 33(1)(a) and (b) of the 1990 Act does not apply by virtue of regulation 68(1) of the 2007 Regulations
A person registered as a carrier of controlled waste under Regulations made under section 2 of the Control of Pollution (Amendment) Act 1989
The name of the waste regulation authority with whom he is registered and his registration number
A person who is not required to be so registered by virtue of Regulations made under section 1(3) of that Act

Category of person	Additional information
A waste collection authority for the purposes of Part II of the 1990 Act
The holder of an environmental permit in respect of a waste operation under the 2007 Regulations, excluding the holder of such a permit in respect of a Part A activity or Part B activity which is not a specified waste management activity within the meaning of paragraph 2 of Schedule 9 to those Regulations	If the waste is to be kept, treated or disposed of by that person, the relevant permit number and the name of the permitting regulator.
A person carrying on an exempt waste operation under the 2007 Regulations
A person carrying on an operation to which section 33(1)(a) and (b) of the 1990 Act does not apply by virtue of regulation 68(1) of the 2007 Regulations
A person registered as a carrier of controlled waste under Regulations made under section 2 of the Control of Pollution (Amendment) Act 1989	The name of the waste regulation authority with whom he is registered and his registration number
A person who is not required to be so registered by virtue of Regulations made under section 1(3) of that Act

The Controlled Waste Regulations 199233

1

The Controlled Waste Regulations 1992 M156 are amended (in relation to England and Wales) as follows.

2

In regulation 1(2), for the definition of “Directive waste”, substitute—

“Directive waste” has the meaning given to the term “waste” in regulation 2(1) of the Environmental Permitting (England and Wales) Regulations 2007;

3

In paragraph 18 of Schedule 3, for the definition of “tank washings”, substitute—

“tank washings” has the meaning given in paragraph 49(3)(e) of Schedule 3 to the Environmental Permitting (England and Wales) Regulations 2007;

The Waste Management Licensing Regulations 199434

1

The Waste Management Licensing Regulations 1994 M157 are amended (in relation to England and Wales) as follows.

2

For regulation 1(3) substitute—

3
In these Regulations—
“the 1990 Act” means the Environmental Protection Act 1990;
“agricultural waste” means waste from premises used for agriculture;
“the Directive” means Directive 2006/12/EC on waste;
“Directive waste” means anything that is waste for the purposes of the Directive and is not excluded from the scope of the Directive by Article 2(1) of the Directive;
“disposal” has the same meaning as in the Directive;
“recovery” has the same meaning as in the Directive;
“waste” means Directive waste;
“waste regulation authority”, “waste disposal authority” and “waste collection authority” have the meaning given in the 1990 Act.

3

Omit regulations 1(4) and 2 to 19.

4

For regulation 20(2), substitute—

2
Paragraph (1) does not apply in relation to an arrangement under which an establishment or undertaking will itself carry out the disposal or recovery of the waste and either—
a
it is authorised to carry out the disposal or recovery of the waste by an environmental permit under the Environmental Permitting (England and Wales) Regulations 2007, a consent under Chapter II of Part III of the Water Resources Act 1991 or a licence under Part II of the Food and Environment Protection Act 1985; or
b
the recovery of the waste is covered by—
i
an exempt waste operation under the Environmental Permitting (England and Wales) Regulations 2007 or any other operation exempt from the requirements of section 33(1)(a) and (b) of the Environmental Protection Act 1990 under those Regulations; or
ii
article 3 of the Deposits in the Sea (Exemptions) Order 1985.

5

Omit Schedules 1 to 3.

6

Amend Schedule 4 as follows—

a

for paragraph 1, substitute—

1
In this Schedule—
“licensing authority” has the meaning given by section 24(1) of the Food and Environment Protection Act 1985;
“permit” means an environmental permit under the Environmental Permitting (England and Wales) Regulations 2007, a licence under Part II of the Food and Environment Protection Act 1985 or a consent under Chapter II of Part III of the Water Resources Act 1991.

b

omit paragraphs 2 to 4, 6 to 11, 13(2) to (5) and 14;

7

In paragraph 1 of Schedule 5, at the end of the definition of “relevant offence”, insert— “ or under regulation 38 of the Environmental Permitting (England and Wales) Regulations 2007 ”.

The Conservation (Natural Habitats, &c.) Regulations 199435

1

The Conservation (Natural Habitats &c.) Regulations 1994 M158 are amended (in relation to England and Wales) as follows.

2

Omit regulations 83 and 84.

3

In regulation 84A—

a

for the cross heading, substitute—

Environmental permits under the Environmental Permitting (England and Wales) Regulations 2007

b

in paragraph (1), for “a permit under the Pollution Prevention and Control (England and Wales) Regulations 2000”, substitute “ an environmental permit under the Environmental Permitting (England and Wales) Regulations 2007 ”.

The Waste Management Licensing (Amendment etc.) Regulations 199536

Omit regulations 3 and 4 of the Waste Management Licensing (Amendment etc.) Regulations 1995 M159 (in relation to England and Wales).

The Landfill Tax Regulations 199637

1

The Landfill Tax Regulations 1996 M160 are amended (in relation to England and Wales) as follows.

2

In regulation 33(4), for sub-paragraphs (h), (i) and (j) substitute—

h
an enforcement notice served under regulation 36 of the Environmental Permitting (England and Wales) Regulations 2007;
i
a suspension notice served under regulation 37 of those Regulations; or
j
an order under regulation 44 of those Regulations.

3

In regulation 38(5), omit sub-paragraph (ac)(ii).

The Waste Management Licensing (Amendment) Regulations 199838

In the Waste Management Licensing (Amendment) Regulations 1998 M161, omit paragraphs (2) and (3) of regulation 2 (in relation to England and Wales).

The Groundwater Regulations 199839

1

The Groundwater Regulations 1998 M162 are amended (in relation to England and Wales) as follows.

2

In regulation 1(3), in the definition of “authorisation”, for sub-paragraphs (e) and (f) substitute—

e
an environmental permit under the Environmental Permitting (England and Wales) Regulations 2007, except to the extent that it authorises the operation of a Part B activity within the meaning of those Regulations;

3

In regulation 3, for “the Pollution Prevention and Control (England and Wales) Regulations 2000”, substitute “ the Environmental Permitting (England and Wales) Regulations 2007 ”.

The Water Protection Zone (River Dee Catchment) Designation Order 199940

1

The Water Protection Zone (River Dee Catchment) Designation Order 1999 M163 is amended as follows.

2

In article 2—

a

in the definition of “catchment control site”, for the words from “a site used for carrying on a prescribed process” to the end, substitute— “ the site of a regulated facility within the meaning of the Environmental Permitting (England and Wales) Regulations 2007 ”;

b

in the definition of “controlled substance”, omit sub-paragraph (i).

The Control of Pollution (Oil Storage) (England) Regulations 2001.41

In regulation 2(2)(a) of the Control of Pollution (Oil Storage)(England) Regulations 2001 M164, for “regulation 1(3) of the Waste Management Licensing Regulations 1994”, substitute “ regulation 2(1) of the Environmental Permitting (England and Wales) Regulations 2007 ”.

The Chemicals (Hazard Information and Packaging for Supply) Regulations 200242

In regulation 3(3)(e) of the Chemicals (Hazard Information and Packaging for Supply) Regulations 2002 M165, for “the Waste Management Licensing Regulations 1994”, substitute (in relation to England and Wales) “ the Environmental Permitting (England and Wales) Regulations 2007 ”.

The End-of-Life Vehicles Regulations 200343

1

The End-of-Life Vehicles Regulations 2003 M166 are amended (in relation to England and Wales) as follows.

2

In regulation 2, for the definition of “authorised treatment facility”, substitute—

“authorised treatment facility” means any establishment or undertaking carrying out treatment operations which holds an environmental permit authorising those operations granted under regulation 13(1) of the Environmental Permitting (England and Wales) Regulations 2007.

3

In regulation 3—

a

omit paragraph (2);

b

for paragraph (4), substitute—

4
These Regulations do not apply to three-wheel motor vehicles.

4

Omit Part VII and Schedule 5.

The Water Environment (Water Framework Directive) (England and Wales) Regulations 200344

1

Schedule 2 to the Water Environment (Water Framework Directive) (England and Wales) Regulations 2003 M167 is amended as follows.

2

Omit paragraphs 13, 23 and 24.

3

At the end of the Schedule add—

28
The Environmental Permitting (England and Wales) Regulations 2007.

The Hazardous Waste (England and Wales) Regulations 200545

1

The Hazardous Waste (England and Wales) Regulations 2005 M168 are amended as follows.

2

In regulation 2(1), for sub-paragraph (a) substitute—

a
“the Waste Directive” means Council Directive 2006/12/EC on waste; and

3

In regulation 5(1)—

a

omit the definitions of “the 1994 Regulations” and “waste management licence”;

b

after the definition of “the 1996 Regulations”, insert—

“the 2007 Regulations” means the Environmental Permitting (England and Wales) Regulations 2007;

c

after the definition of “emergency services”, insert—

“environmental permit” has the meaning given in regulation 13(1) of the 2007 Regulations;

d

for the definition of “registered exemption”, substitute—

“registered exemption” means an activity set out in Part 1 of Schedule 3 to the 2007 Regulations which is registered with the exemption registration authority in accordance with those Regulations;

e

for the definition of “waste permit”, substitute—

“waste permit” means an environmental permit, a licence under Part II of the Food and Environment Protection Act 1985 or a consent under Chapter II of Part III of the Water Resources Act 1991.

4

In regulation 22(2), for “a waste management licence” substitute “ an environmental permit ”.

5

In regulation 26(4)(d), for “paragraph 13 of Schedule 4 to the 1994 Regulations” substitute “ regulation 34(2) of the 2007 Regulations ”.

6

In regulation 42(6)(a), for all the words after “waste permit” substitute “ or is entitled to carry on a registered exemption in respect of the recovery or disposal of the waste; and ”.

7

In Part E of the consignment note in Schedule 4 omit “waste management licence/”.

The Hazardous Waste (Wales) Regulations 200546

1

The Hazardous Waste (Wales) Regulations 2005 M169 are amended as follows.

2

In regulation 2(1), for sub-paragraph (a) substitute—

“the Waste Directive” (“y Gyfarwyddeb Wastraff”) means Council Directive 2006/12/EC on waste; and

3

In regulation 5(1)—

a

omit the definitions of “the 1994 Regulations” and “waste management licence”;

b

after the definition of “the 1996 Regulations”, insert—

“the 2007 Regulations” (“Rheoliadau 2007”) means the Environmental Permitting (England and Wales) Regulations 2007;

c

after the definition of “emergency services”, insert—

“environmental permit” (“trwydded amgylcheddol”) has the meaning given in the 2007 Regulations;

d

for the definition of “registered exemption”, substitute—

“registered exemption” (“esemptiad cofrestredig”) means an activity set out in Part 1 of Schedule 3 to the 2007 Regulations which is registered with the exemption registration authority in accordance with those Regulations;

e

for the definition of “waste permit”, substitute—

“waste permit” (“trwydded gwastraff”) means an environmental permit under the 2007 Regulations, a licence under Part II of the Food and Environment Protection Act 1985 or a consent under Chapter II of Part III of the Water Resources Act 1991.

4

In regulation 22(2), for “a waste management licence” substitute “ an environmental permit ”.

5

In regulation 26(4)(d), for “paragraph 13 of Schedule 4 to the 1994 Regulations” substitute “ regulation 34(2) of the 2007 Regulations ”.

6

In regulation 42(6)(a), for all the words after “waste permit” substitute “ or is entitled to carry on a registered exemption in respect of the recovery or disposal of the waste; and ”.

7

In Part E of the consignment note in Schedule 4 delete “waste management licence/”.

The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 200547

In regulation 3(4) of the Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2005 M170, in the definition of “SED Activity”, for “Part 1 of Schedule 1 of the Pollution Prevention and Control (England and Wales) Regulations 2000”, substitute (in relation to England and Wales) “Part 2 of Schedule 1 to the Environmental Permitting (England and Wales) Regulations 2007”.

The Greenhouse Gas Emissions Trading Scheme Regulations 200548

In regulation 8(3)(b) of the Greenhouse Gas Emissions Trading Scheme Regulations 2005 M171, for paragraph (i) substitute (in relation to England and Wales)—

i
the Environmental Permitting (England and Wales) Regulations 2007;

The Contaminated Land (England) Regulations 200649

For regulation 2(4) of the Contaminated Land (England) Regulations 2006 M172, substitute—

4
In paragraph (1)(e), “Part A(1) installation” and “Part A(1) mobile plant” have the same meanings as in the Environmental Permitting (England and Wales) Regulations 2007, and “permit” has the same meaning as “environmental permit” in those Regulations

The Contaminated Land (Wales) Regulations 200650

For regulation 2(4) of the Contaminated Land (Wales) Regulations 2006 M173, substitute—

4
In paragraph (1)(e), “Part A(1) installation” and “Part A(1) mobile plant” have the same meanings as in the Environmental Permitting (England and Wales) Regulations 2007, and “permit” has the same meaning as “environmental permit” in those Regulations

The Waste Electrical and Electronic Equipment Regulations 200651

1

In regulation 2(1) of the Waste Electrical and Electronic Equipment Regulations 2006 M174, the definition of “relevant authorisation” is amended (in relation to England and Wales) as follows.

2

In paragraph (a), for the words “a permit granted under regulation 10 of the Pollution Prevention and Control (England and Wales) Regulations 2000”, substitute “ a permit granted under regulation 13(1) of the Environmental Permitting (England and Wales) Regulations 2007 ”.

3

Omit paragraphs (b) and (c).

4

For paragraph (d), substitute—

d
an exempt waste operation under the Environmental Permitting (England and Wales) Regulations 2007 or any other operation exempt from the requirements of section 33(1)(a) and (b) of the Environmental Protection Act 1990 under those Regulations;

The Producer Responsibility Obligations (Packaging Waste) Regulations 200752

1

In regulation 2(1) of the Producer Responsibility Obligations (Packaging Waste) Regulations 2007 M175, the definition of “relevant authorisation” is amended (in relation to England and Wales) as follows.

2

3

Omit paragraphs (b) and (c).

4

For paragraph (d), substitute—

d
an exempt waste operation under the Environmental Permitting (England and Wales) Regulations 2007 or any other operation exempt from the requirements of section 33(1)(a) and (b) of the Environmental Protection Act 1990 under those Regulations;

The Waste Management (Miscellaneous Provisions) (England and Wales) Regulations 200753

In the Waste Management (Miscellaneous Provisions) (England and Wales) Regulations 2007 M176, omit regulations 2 to 5.

The Transfrontier Shipment of Waste Regulations 200754

For regulation 16 of the Transfrontier Shipment of Waste Regulations 2007 M177, substitute (in relation to England and Wales)—

Environmental Permitting (England and Wales) Regulations 200716
The definition of “waste management plan” in paragraph 1 of Schedule 20 to the Environmental Permitting (England and Wales) Regulations 2007 has effect as if the reference in that paragraph to a plan made under the plan-making provisions included a reference to a waste management plan made under this Part.

The Large Combustion Plants (National Emission Reduction Plan) Regulations 200755

1

The Large Combustion Plants (National Emission Reduction Plan) Regulations 2007 M178 are amended (in relation to England and Wales) as follows.

2

For regulation 3(1)(a), substitute—

a
as regards England and Wales, a large combustion plant in respect of which the environmental permit under the Environmental Permitting (England and Wales) Regulations 2007 contains a NERP provision;

3

In paragraph 1 of Schedule 1, in the definition of “cumulative in-year mass emissions”, for sub-paragraph (a), substitute—

a
of a participating plant in England or Wales, to the Agency in accordance with the conditions of the environmental permit under the Environmental Permitting (England and Wales) Regulations 2007;

SCHEDULE 22Revocations

Regulation 74(1)

Regulations revoked	References	Extent of revocation
The Environmental Protection (Prescribed Processes and Substances) Regulations 1991	S.I. 1991/472	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Applications, Appeals and Registers) Regulations 1991	S.I. 1991/507	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Prescribed Processes and Substances) (Amendment) Regulations 1992	S.I. 1992/614	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Prescribed Processes and Substances) (Amendment) Regulations 1993	S.I. 1993/1749	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Prescribed Processes and Substances) (Amendment) (No.2) Regulations 1993	S.I. 1993/2405	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Prescribed Processes and Substances Etc) (Amendment) Regulations 1994	S.I. 1994/1271	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Prescribed Processes and Substances Etc) (Amendment) (No.2) Regulations 1994	S.I. 1994/1329	The Regulations insofar as they apply in England and Wales
The Waste Management Licensing (Amendment No. 2) Regulations 1995	S.I. 1995/1950	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Prescribed Processes and Substances) (Amendment) Regulations 1995	S.I. 1995/3247	The Regulations insofar as they apply in England and Wales
The Waste Management Regulations	S.I. 1996/634	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Applications, Appeals and Registers) (Amendment) Regulations 1996	S.I. 1996/667	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Applications, Appeals and Registers) (Amendment) (No.2) Regulations 1996	S.I. 1996/979	The Regulations insofar as they apply in England and Wales
The Waste Management Licensing (Amendment) Regulations 1996	S.I. 1996/1279	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Prescribed Processes and Substances Etc) (Amendment) (Petrol Vapour Recovery) Regulations 1996	S.I. 1996/2678	The Regulations insofar as they apply in England and Wales
The Waste Management Licensing (Amendment) Regulations 1997	S.I. 1997/2203	The Regulations insofar as they apply in England and Wales
The Environmental Protection (Prescribed Processes and Substances) (Amendment) (Hazardous Waste Incineration) Regulations 1998	S.I. 1998/767	The Regulations insofar as they apply in England and Wales
The Waste Management Licences (Consultation and Compensation) Regulations 1999	S.I. 1999/481	The Regulations insofar as they apply in England and Wales
The Pollution Prevention and Control (England and Wales) Regulations 2000	S.I. 2000/1973	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Amendment) Regulations 2001	S.I. 2001/503	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Amendment) Regulations 2002	S.I. 2002/275	The whole Regulations
The Waste Management Licensing (Amendment) (England) Regulations 2002	S.I. 2002/674	The whole Regulations
The Waste Management Licensing (Amendment) (Wales) Regulations 2002	S.I. 2002/1087 (W.114)	The whole Regulations
The Landfill (England and Wales) Regulations 2002	S.I. 2002/1559	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Amendment) (No. 2) Regulations 2002	S.I. 2002/1702	The whole Regulations
The Large Combustion Plants (England and Wales) Regulations 2002	S.I. 2002/2688	The whole Regulations
The Waste Incineration (England and Wales) Regulations 2002	S.I. 2002/2980	The whole Regulations
The Waste Management Licensing (Amendment) (England) Regulations 2003	S.I. 2003/595	The whole Regulations
The Waste Management Licensing (Amendment) (Wales) Regulations 2003	S.I. 2003/780 (W.91)	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Amendment) Regulations 2003	S.I. 2003/1699	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Amendment) (No. 2) Regulations 2003	S.I. 2003/3296	The whole Regulations
The Waste Management Licensing (Amendment) (Wales) Regulations 2004	S.I. 2004/70 (W. 6)	The whole Regulations
The Solvent Emissions (England and Wales) Regulations 2004	S.I. 2004/107	The whole Regulations
The Pollution Prevention and Control (Unauthorised Part B Processes) (England and Wales) Regulations 2004	S.I. 2004/434	The whole Regulations
The Landfill (England and Wales) (Amendment) Regulations 2004	S.I. 2004/1375	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Amendment) and Connected Provisions Regulations 2004	S.I. 2004/3276	The whole Regulations
The Pollution Prevention and Control (Public Participation) (England and Wales) Regulations 2005	S.I. 2005/1448	The whole Regulations
The Landfill (England and Wales) (Amendment) Regulations 2005	S.I. 2005/1640	The whole Regulations
The Waste Management Licensing (England and Wales) (Amendment and Related Provisions) (No. 3) Regulations 2005	S.I. 2005/1728	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Amendment) (England) Regulations 2006	S.I. 2006/2311	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Wales) Regulations 2006	S.I. 2006/2802 (W. 241)	The whole Regulations
The Waste Electrical and Electronic Equipment (Waste Management Licensing) (England and Wales) Regulations 2006	S.I. 2006/3315	The whole Regulations
The Pollution Prevention and Control (England and Wales) (Amendment) Regulations 2007	S.I. 2007/713	The whole Regulations
The Pet Cemeteries (England and Wales) Regulations 2007	S.I. 2007/2596	The whole Regulations

SCHEDULE 23Repeals

Regulation 74(2)

Chapter	Short title	Extent of repeal
1961 c. 64	The Public Health Act 1961	In section 34(5), the words “or waste deposited in accordance with a disposal licence in force under Part I of the Control of Pollution Act 1974”.
1974 c. 40	The Control of Pollution Act 1974	Paragraph 18 of Schedule 3.
1990 c. 43	The Environmental Protection Act 1990	In section 29(9) the words “, subject to subsection (10) below,”. Section 29(10). In section 33(6) the words “or any condition of a waste management licence”. Sections 35 to 43. In section 44(1)(a), the word “or”. Section 44(1)(b) and (2). Section 57(7A). Sections 64 to 66. Section 74. Section 77.
1991 c. 57	The Water Resources Act 1991	In sections 85(1), 91(2G)(a), 161(1), 161A(1) and 203(6)(b), the word “solid”. Section 88(1)(aa). Section 88(3). In section 88(4), the definitions of “disposal licence” and “waste management licence>”, and the word “and” immediately preceding the latter.
1995 c. 25	The Environment Act 1995	Section 56(1)(c). In section 114(2)(a)(iii), the references to sections 43 and 66(5) of the Environmental Protection Act 1990. Section 114(2)(a)(vii). In paragraph 4(3)(b) of Schedule 20, the reference to section 66(5) of the Environmental Protection Act 1990. Paragraphs 66 to 74 of Schedule 22. Paragraphs 76, 77, 82 and 83 of Schedule 22.
1996 c. 8	The Finance Act 1996	Section 43C(3)(b).
1999 c. 24	The Pollution Prevention and Control Act 1999	Section 4. Paragraph 5 of Schedule 2.
2000 c. 37	The Countryside and Rights of Way Act 2000	Paragraph 8 of Schedule 10.
2006 c. 16	The Natural Environment and Rural Communities Act 2006	Paragraph 116 of Schedule 11.

(This note is not part of the Regulations)

These Regulations replace the system of waste management licensing in Part II of the Environmental Protection Act 1990 (c. 43) and the Waste Management Licensing Regulations 1994 (S.I. 1994/1056, as amended), and the system of permitting in the Pollution Prevention and Control (England and Wales) Regulations 2000 (S.I. 2000/1973, as amended), with a new system of environmental permitting in England and Wales.

They transpose provisions of the following Directives which impose obligations either required to be delivered through permits or capable of being delivered through permits:

— Council Directive 87/217/EEC on the prevention and reduction of environmental pollution by asbestos, as amended (OJ No. L 85, 28.3.1987, p40);
— Council Directive 92/112/EEC on procedures for harmonizing the programmes for the reduction and eventual elimination of pollution caused by waste from the titanium dioxide industry (OJ No. L 409, 31.12.1992, p11);
— European Parliament and Council Directive 94/63/EC on the control of volatile organic compound (VOC) emissions resulting from the storage of petrol and its distribution from terminals to service stations, as amended (OJ No. L 365, 31.12.1994, p24);
— Council Directive 96/61/EC concerning integrated pollution prevention and control, as amended (OJ No. L 257, 10.10.1996, p26);
— Council Directive 1999/13/EC on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain activities and installations, as amended (OJ No. L 85, 29.3.1999, p1);
— Council Directive 1999/31/EC on the landfill of waste, as amended (OJ No. L 182, 16.7.1999, p1);
— Directive 2000/53/EC of the European Parliament and of the Council on end-of life vehicles, as amended (OJ No. L 269, 21.10.2000, p34);
— Directive 2000/76/EC of the European Parliament and of the Council on the incineration of waste, (OJ No. L 145, 28.12.2000);
— Directive 2001/80/EC of the European Parliament and of the Council on the limitation of emissions of certain pollutants into the air from large combustion plants (OJ No. L 309, 27.11.2001, p1);
— Directive 2002/96/EC of the European Parliament and of the Council on waste electrical and electronic equipment (WEEE), as amended (OJ No. L 37, 13.2.2003, p24);
— Directive 2006/12/EC of the European Parliament and of the Council on waste (OJ No. L 114, 27.4.2006, p9).

Scope

Regulation 8 defines the term “regulated facility” and regulation 12 requires every regulated facility to operate under the authority of an environmental permit.

“Regulated facility” includes every installation and mobile plant. Those terms are defined by regulations 2(1) and 3, and by Schedule 1, which contains detailed descriptions of activities which must be authorised by a permit in order to operate. Schedule 1 also categorises those activities as “Part A(1)”, “Part A(2)” and “Part B”. These categories are used in regulation 32 to designate the regulator.

“Regulated facility” also includes every waste mobile plant and waste operation not otherwise included. Those terms are defined, respectively, in regulations 8 and 2(1).

“Regulated facility” does not include any “excluded waste operation” or “exempt waste operation”, and operators carrying these on do not therefore require an environmental permit.

“Excluded waste operation” is defined in regulation 4 and covers waste operations which are authorised by other specified regulatory systems.

“Exempt waste operation” is defined in regulation 5. Schedule 2 contains procedure in relation to exempt waste operations, including registration requirements. A waste operation cannot be an exempt waste operation unless it falls within a description in Schedule 3.

Procedure

Part 2 and Schedules 5 and 6 provide procedure in relation to environmental permits.

Regulations 13 (grant of a permit), 20 (variation of a permit), 21 (transfer of a permit) and 25 (surrender of a permit), with Part 1 of Schedule 5, regulate permit applications. Regulation 20 also provides for variation of a permit on the initiative of the regulator. Regulation 24 allows certain permits to be surrendered by notification.

Regulation 15 and Part 2 of Schedule 5 provide for compensation where a permit condition requires interference with the property rights of a person other than the operator.

Regulation 17 allows more than one regulated facility on the same site, or with the same operator, to be authorised by the same permit in some circumstances; regulation 18 allows the consolidation of separate permits.

Regulations 22 and 23 provide for the revocation of a permit on the initiative of the regulator.

Regulations 26-30 provide for the preparation of standard rules applying to a description of regulated facility, which may be incorporated into a permit at the request of an operator.

Regulation 31 and Schedule 6 provide for appeals.

Duties of the regulator

Part 3 and Schedules 7 to 18 provide for the discharge of functions by the regulator in relation to permits.

Regulation 32 sets the regulator for different categories of regulated facility and regulation 33 allows for change of regulator at the direction of the Secretary of State or the Welsh Ministers.

Regulation 34 requires the regulator to review permits from time to time and to inspect regulated facilities.

Regulation 35 and Schedules 7 to 18 require the regulator to exercise its functions so as to comply with the duties set out in those Schedules. Each Schedule requires the regulator to ensure compliance with one of the Directives set out above when exercising its functions in relation to a regulated facility falling within the Schedule's scope.

Enforcement, powers and functions

Part 4 contains enforcement-related provision.

Regulations 36 and 37 provide, respectively, for enforcement notices (requiring compliance with a permit) and suspension notices (suspending the authorisation of a regulated facility).

Regulation 38 contains offences and regulation 40 provides for a defence. Regulation 39 sets the penalties on conviction.

Part 5 and Schedule 19 makes provision for public registers to be kept by the regulator, including information which may be kept off the register in the interests of national security or because it is confidential in nature.

Part 6 confers powers on the regulator, Secretary of State and Welsh Ministers and imposes duties on the regulator. The Part includes power for the regulator to prevent or remedy pollution and to recover associated costs from the operator (regulation 57), a requirement on the Environment Agency to publish a public participation statement (regulation 59), and power for the Secretary of State or Welsh Ministers to make schemes setting fees and charges in relation to local authority functions under the Regulations (regulation 65; the Environment Agency has a power to make such schemes in relation to its functions under section 41 of the Environment Act 1995 (c. 25)).

Miscellaneous provisions

Part 7 and Schedules 20 to 23 contain miscellaneous and transitional provision, savings, consequential amendments, revocations and repeals.

The Part includes provision requiring public authorities to deliver obligations under the Waste Framework Directive (2006/12/EC, cited above) when making decisions on specified authorisations other than environmental permits, including planning permissions (regulation 68 and Schedule 20).

Regulatory impact assessment

A full regulatory impact assessment of the effect that this instrument will have on the costs of business and the voluntary sector is available from the Environment Regulation Policy Division, Department for Environment, Food and Rural Affairs, Ergon House, Horseferry Road, London SW1P 2AL, and is annexed to the Explanatory Memorandum which is available alongside the instrument on the OPSI website.