- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Regulations 10, 11(2), 12(2)(a)
1. | This Annex describes the procedure by which the responsible person, who carries out the obligations laid down in points 2 and 3 of this Annex, ensures and declares that the machinery concerned satisfies the relevant provisions of the Directive. |
2. | For each representative type of the series in question, the responsible person shall draw up the technical file referred to in Annex VII (Part 7 of this Schedule), part A. |
3. | The manufacturer must take all measures necessary in order that the manufacturing process ensures compliance of the manufactured machinery with the technical file referred to in Annex VII, part A, and with the provisions of the Directive. |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: