- Latest available (Revised)
- Point in Time (01/02/2017)
- Original (As made)
Version Superseded: 20/05/2018
Point in time view as at 01/02/2017.
There are currently no known outstanding effects for the The Supply of Machinery (Safety) Regulations 2008, SCHEDULE 3.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulations 4(1)(a)(ii) and 6(2)(b)
1. These Regulations do not apply to—U.K.
(a)safety components which are—
(i)intended to be used as spare parts to replace identical components; and
(ii)supplied by the manufacturer of the original machinery;
(b)equipment specifically for use in fairgrounds and/or amusement parks;
(c)machinery specially designed or put into service for nuclear purposes which, in the event of failure, may result in an emission of radioactivity;
(d)weapons, including firearms;
(e)subject to paragraph 2, the following means of transport—
(i)agricultural and forestry tractors, in respect of the risks covered by Directive 2003/37/EC M1;
(ii)motor vehicles and trailers as defined in Article 3(11) and (12) of Directive 2007/46/EC of the European Parliament and the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles M2;
(iii)vehicles covered by Directive 2002/24/EC of the European Parliament and of the Council of 18 March 2002 relating to the type-approval of two or three-wheel motor vehicles M3;
(iv)motor vehicles exclusively intended for competition; and
(v)means of transport by air, on water and on rail networks,
(f)seagoing vessels, mobile offshore units and machinery installed on board such vessels or units;
(g)machinery specially designed and constructed for military or police purposes;
(h)machinery specially designed and constructed for research purposes for temporary use in laboratories;
(i)mine winding gear;
(j)machinery intended to move performers during artistic performances;
(k)electrical and electronic products falling within the following areas, insofar as they are covered by Council Directive 2006/95/EC of 12 December 2006 M4 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits—
(i)household appliances intended for domestic use,
(ii)audio and video equipment,
(iii)information technology equipment,
(iv)ordinary office machinery,
(v)low-voltage switchgear and control gear,
(vi)electric motors; and
(l)the following types of high-voltage electrical equipment—
(i)switch gear and control gear, and
(ii)transformers.
Marginal Citations
M1O.J. No. L 171, 9.7.2003, p.1.
M2O.J. No. L 263, 9.10.2007, p.1.
M3O.J. No. L 49, 22.2.2003, p.23.
M4O.J. No. L 374, 27.12.2006, p.10.
2. The following products are subject to these Regulations—U.K.
(a)machinery mounted on vehicles of the kinds specified in paragraph 1(e)(i) to (iii);
(b)products which—
(i)but for regulations 4(1)(a)(iii) and 6(2)(b) and paragraph 1(e)(ii), would be machinery or partly completed machinery;
(ii)fall within one of the categories specified in Article 2(3)(a) to (c) or 2(4)(b) of Directive 2007/46/EC; and
(iii)are not excluded from these Regulations by paragraph 1(g)); and
(c)machinery mounted on the means of transport specified in paragraph 1(e)(v).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: