PART 1 E+W+SINTRODUCTORY PROVISIONS
Citation and commencementE+W+S
1. These Regulations may be cited as the Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2009 and come into force on 1st July 2009.
Interpretation - GeneralE+W+S
2.—(1) The provisions of this regulation apply for the purposes of interpreting these Regulations.
(2) Any reference in these Regulations to a “Part”, “Chapter”, “Section” or “Sub-section”, unless the context requires otherwise, is to be construed—
(a)in relation to the carriage of goods by road, as a reference to that Part, Chapter, Section or Sub-section of ADR;
(b)in relation to the carriage of goods by rail, as a reference to that Part, Chapter, Section or Sub-section of RID; and
(c)in relation to the carriage of goods by inland waterway, as a reference to that Part, Chapter, Section or Sub-section of ADN.
(3) Where an expression is defined in ADR, RID or ADN and is not defined in these Regulations, it has the same meaning as in—
(a)ADR in relation to carriage by road;
(b)RID in relation to carriage by rail; and
(c)ADN in relation to carriage by inland waterway.
(4) Where an expression is defined in the Transportable Pressure Equipment Directive and is not defined in these Regulations, it has the same meaning as in that Directive.
(5) The expressions mentioned in column 1 of the Table have the meanings given in column 2.
Table
Column 1 | Column 2 |
---|---|
“the 2007 Regulations” | The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2007 M1. |
“ADN” | The Regulations annexed to the European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterway M2, as revised or reissued from time to time. |
“ADR” | Annexes A and B to the European Agreement concerning the International Carriage of Dangerous Goods by Road M3, as revised or reissued from time to time. But— (a)to the extent that a reference in these Regulations to ADR is a reference to ADR as it applied for the purposes of the 2007 Regulations, it has the same meaning as in the Table in regulation 2 of those Regulations; and (b)in regulation 14(6)(b) it means Annexes A and B as in force on the date in question. |
“armed forces” | Means— (a)one of Her Majesty's Forces within the meaning of the Armed Forces Act 2006 M4; (b)the Ministry of Defence Police M5; (c)a visiting force within the meaning of Part 1 of the Visiting Forces Act 1952 M6; or (d)a headquarters or organisation designated for the purposes of the International Headquarters and Defence Organisations Act 1964 M7. |
[F1“conformity assessment” | The assessment and the procedure for assessment of conformity set out in the Directives.] |
[F2“conformity mark” | The mark referred to in article 14 of the Transportable Pressure Equipment Directive, the form of the mark being set out in article 15 of that Directive.] |
“COTIF” | The Convention concerning International Carriage by Rail M8, as revised or re-issued from time to time. |
“the Dangerous Goods Directive” | Directive 2008/68/EC of the European Parliament and of the Council of 24th September 2008 on the inland transport of dangerous goods M9, as amended from time to time. |
[F3“the Directives” | The Dangerous Goods Directive and the Transportable Pressure Equipment Directive.] |
“fire and rescue authority” | The fire and rescue authority under the Fire and Rescue Services Act 2004 M10 |
“the GB competent authority” | The competent authority in Great Britain for the purposes of these Regulations as determined under regulation 25. But a reference to “2007 GB Competent Authority” is a reference to the competent authority in Great Britain for the purposes of the 2007 Regulations. |
“national carriage” | Carriage that includes carriage in Great Britain and does not include carriage outside the United Kingdom. |
F4. . . | F4. . . |
[F5“relevant member State” | A member State of the EU on whose market the equipment in question has been made available.] |
“RID” | The Annex to the Regulation concerning the international carriage of dangerous goods by rail which forms Appendix C to COTIF M11, as revised or reissued from time to time. But— (a)to the extent that a reference in these Regulations to RID is a reference to RID as it applied for the purposes of the 2007 Regulations, it has the same meaning as in the Table in regulation 2 of those Regulations; and (b)in regulation 14(6)(b) it means the Annex as in force on the date in question. |
“the security provisions” | The prohibitions and requirements of Chapter 1.10 (including those requirements deemed to be part of ADR in consequence of regulations 7 and 8.) |
[F6“TPED competent authority” | The GB competent authority or the competent national authority in respect of the Transportable Pressure Equipment Directive in Northern Ireland or another member State of the EU.] |
[F7“the Transportable Pressure Equipment Directive” | Directive 2010/35/EU of the European Parliament and the Council of 16 June 2010 on transportable pressure equipment and repealing Council Directives 76/767/EEC, 84/525/EEC, 84/526/EEC, 84/527/EEC and 1999/36/EC. ] |
“vehicle” | Has the meaning given in article 2 of the Dangerous Goods Directive except that the words “at least four wheels and” are to be omitted. |
“wagon” | Has the meaning given in article 2 of the Dangerous Goods Directive. |
Textual Amendments
F1Words in reg. 2(5) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 3(3)
F2Words in reg. 2(5) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 3(2)
F3Words in reg. 2(5) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 3(4)
F4Words in reg. 2(5) omitted (S.) (1.4.2013) by virtue of The Police and Fire Reform (Scotland) Act 2012 (Consequential Modifications and Savings) Order 2013 (S.S.I. 2013/119), art. 1, sch. 2 para. 26(2)
F5Words in reg. 2(5) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 3(5)
F6Words in reg. 2(5) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 3(6)
F7Words in reg. 2(5) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 3(7)
Marginal Citations
M2ISBN 9789211391343 (2009 edition).
M3ISBN 9789211391336 (2009 edition).
M5See section 1(1) of the Ministry of Defence Police Act 1987 (c.4).
M8Cm 3812; COTIF was modified by the Protocol signed at Vilnius on 3rd June 1999 (Cm 4873).
M9OJ No L260, 30.9.2008, p.13.
M102004 c.21; section 1(2)(d) was amended by the Civil Contingencies Act 2004 (c.36), Schedule 2, Part 1, paragraph 10(1) and (2).
M11ISBN 9788086206394 (2009 edition).
Interpretation of ADR, RID and ADN for the purposes of these RegulationsE+W+S
3. For the purposes of these Regulations—
(a)the scope of ADR, RID and ADN is deemed to include national as well as international carriage;
(b)a member State of the [F8EU] which is not a Contracting Party to ADR or ADN is deemed to be a Contracting Party to ADR or ADN (as the case may be);
(c)a member State of the [F8EU]which is not a Member State of COTIF is deemed to be a Member State of COTIF;
(d)a reference in—
(i)ADR or RID to “competent military authority”;
(ii)ADR or ADN to “Contracting Party”; and
(iii)RID to “Member State”,
is to be treated as a reference to “competent authority” unless the context requires otherwise;
(e)Sub-section 1.1.4.4 of RID applies as if the words “or the provisions of the Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2009 in so far as they relate to carriage by road” were included after the words “provisions of ADR”;
F9(f). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F9(g). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F9(h). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F9(i). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(j)the words “The competent authorities of the Contracting Parties may provide that” are omitted from Sub-section 1.8.3.2 of ADR;
(k)the words “The competent authorities of the Member States may provide that” are omitted from Sub-section 1.8.3.2 of RID;
(l)the reference in Sub-section 1.8.3.3 to “national authorities” is to be treated as a reference to “the GB competent authority or an enforcement authority”; F10...
(m)Sub-section 5.3.4 of RID is omitted[F11;]
[F11(n)Sub-sections 2.2.1.1.2, 2.2.1.1.3 and 2.2.1.1.4 of ADR apply as if the words “by the competent authority of a Contracting Party” were included after the word “assigned”; and]
[F11(o)Sub-sections 2.2.1.1.2, 2.2.1.1.3 and 2.2.1.1.4 of RID apply as if the words “by the competent authority of a Member State of COTIF” were included after the word “assigned”.]
Textual Amendments
F8Word in reg. 3(b)(c) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 4(2)
F9Reg. 3(f)(g)(h)(i) omitted (24.10.2011) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 4(3)
F10Word in reg. 3(l) omitted (24.10.2011) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 4(4)
F11Reg. 3(n)(o) substituted for full stop (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 4(5)
ApplicationE+W+S
4.—(1) These Regulations apply in relation to the carriage of dangerous goods by road and by rail.
(2) These Regulations apply in relation to the carriage of dangerous goods by inland waterway but only to the extent that they apply Sub-sections 1.8.3.7 to 1.8.3.16 (which relate to the training and examination system for safety advisers and the connected issuing and renewal of vocational training certificates).
(3) These Regulations do not apply in relation to the carriage of dangerous goods on any part of the Channel Tunnel system.
(4) In this regulation “the Channel Tunnel system” has the meaning given to “the tunnel system” by section 1(7) of the Channel Tunnel Act 1987 M12 except that the words “to be” which come before the word “constructed” are omitted.
PART 2 E+W+SPROHIBITIONS AND REQUIREMENTS
Carriage to be in accordance with ADR or RIDE+W+S
5. No person is to carry dangerous goods, or cause or permit dangerous goods to be carried, where that carriage is prohibited by ADR or RID, including where that carriage does not comply with any applicable requirement of ADR or RID.
Alternative placarding requirements to apply to certain national carriageE+W+S
6.—(1) This regulation applies in relation to national carriage—
(a)in a tank;
(b)in bulk; or
(c)in relation to carriage by rail, by piggyback transport,
where that carriage is by a United Kingdom vehicle or a United Kingdom wagon.
(2) But this regulation does not apply in relation to carriage—
(a)of class 7 goods; or
(b)of any dangerous goods by a vehicle or wagon belonging to or under the responsibility of one of the armed forces.
(3) For the purposes of regulation 5, the requirements of—
(a)Part 1 of Schedule 1 in respect of carriage by road; and
(b)Part 2 of Schedule 1 in respect of carriage by rail,
are deemed to be requirements of Section 5.3.2 and any conflicting requirements in ADR or RID are to be disregarded.
(4) In this regulation—
(a)a “United Kingdom vehicle” means a vehicle registered by the Secretary of State in accordance with section 21(1) of the Vehicle Excise and Registration Act 1994 M13 or a trailer being towed by such a vehicle; and
(b)a “United Kingdom wagon” means a wagon used only for carriage within the United Kingdom.
(5) In Schedule 1 “emergency action code” is a reference to the emergency action code for the dangerous goods in question as listed in the Dangerous Goods Emergency Action Code List M14, as revised or reissued from time to time.
Marginal Citations
M131994 c.22; paragraph 2 of Schedule 3 to the Finance Act 1997 replaced the existing section 21(1) with a new version.
M14ISBN 9780113413263 (2009 edition).
Additional security requirements for carriage by roadE+W+S
7.—(1) For the purposes of regulation 5, the requirements set out in paragraphs (2) to (4) are deemed to be requirements of Chapter 1.10 of ADR.
(2) The carrier and the driver of a vehicle which is being used for the carriage of class 1 goods must ensure that—
(a)the carriage is completed within a reasonable length of time having regard to the distance involved;
(b)the class 1 goods are delivered to—
(i)the consignee or the consignee's agent; or
(ii)a person who is authorised by the consignee to accept custody of the class 1 goods—
(aa)for onward despatch; or
(bb)in circumstances where the consignee has compelling reasons not to accept the goods in accordance with Sub-section 1.4.2.3,
provided they are delivered to qualifying premises;
(c)the goods are unloaded from the vehicle as soon as is reasonably practicable after it arrives at its place of delivery; and
(d)any trailer or container containing class 1 goods is not detached, or removed, from the vehicle unless it is in qualifying premises.
(3) But paragraph (2)(d) does not apply in an emergency.
(4) The carrier of a vehicle used for the carriage of class 1 goods must not remove any class 1 goods from the consignor's premises unless ready immediately to despatch them to the consignee or a person authorised by the consignee to accept custody in the circumstances referred to in paragraph (2)(b)(ii)(aa).
(5) In this regulation—
(a)“designated parking area” means—
(i)in relation to an airport or railway transhipment depot or siding, an area allocated by the occupier as an area for parking vehicles carrying class 1 goods; and
(ii)in relation to a harbour or harbour area, a parking area designated for the purposes of regulation 32 of the Dangerous Substances in Harbour Areas Regulations 1987 M15;
(b)“qualifying premises” means—
(i)premises under the control of the Secretary of State for Defence;
(ii)a safe and secure place; or
(iii)a designated parking area in an airport, a railway transhipment depot or siding or a harbour or harbour area; and
(c)“a safe and secure place” means a place within a site—
(i)in relation to which a person—
(aa)is licensed to manufacture or store explosives under regulation 13 of the Manufacture and Storage of Explosives Regulations 2005 M16; or
(bb)is registered in respect of such storage under regulation 11 of those Regulations; or
(ii)in respect of which a certificate of exemption has been granted under the Explosives Act 1875 (Exemption) Regulations 1979 M17.
Marginal Citations
M15S.I. 1987/37; to which there are amendments not relevant to these Regulations.
Additional security requirement relating to accessE+W+S
8.—(1) For the purposes of regulation 5, the requirement set out in paragraph (2) is deemed to be a requirement of Chapter 1.10.
(2) A person involved in the carriage of dangerous goods must take all reasonable steps to ensure that unauthorised access to those goods is prevented.
Application of ADR to carriage by private individualsE+W+S
9.—(1) This regulation applies in relation to the carriage of class 1 goods by road.
(2) For the purposes of regulation 5, the exemption from the prohibitions and requirements of ADR provided for by Sub-section 1.1.3.1(a) of ADR (carriage by private individuals) is to be disregarded.
(3) But paragraph (2) does not apply if the conditions specified in paragraphs (4) and (5) are satisfied.
(4) The net mass of explosive substance being carried does not exceed—
(a)in the case of fireworks, 50 kilograms; and
(b)in the case of other explosives or a combination of fireworks and other explosives, 30 kilograms.
(5) The individual has taken all reasonable steps to ensure that—
(a)the manner in which the class 1 goods are loaded, stowed, carried or unloaded will not create a significant risk or significantly increase any existing risk to the health or safety of any person; and
(b)there is no unauthorised access to the class 1 goods.
Application of ADR to carriage by certain enterprisesE+W+S
10.—(1) This regulation applies in relation to the carriage of class 1 goods by road.
(2) For the purposes of regulation 5, the requirements referred to in paragraph (3) apply to carriage that would, but for this paragraph, be exempt from those requirements because of the exemption set out in Sub-section 1.1.3.1(c) of ADR (carriage by enterprises which is ancillary to their main activity).
(3) The requirements are—
(a)the requirements of ADR in—
(i)Section 7.5;
(ii)Section 8.3.5; and
(iii)special provisions S1:(3) and S1:(6) of Chapter 8.5; and
(b)the requirements deemed to be part of ADR in consequence of regulations 7 and 8.
PART 3 E+W+SEXEMPTIONS
Derogations and transitional provisionsE+W+S
11.—(1) The Secretary of State for Transport may exempt the carriage of dangerous goods from requirements and prohibitions arising under Part 2 of these Regulations.
(2) But paragraph (1) only applies for the purposes of—
(a)implementing a derogation authorised under article 6(2) to (4) of the Dangerous Goods Directive;
(b)maintaining a transitional provision permitted by article 7 of the Dangerous Goods Directive; or
(c)ensuring that carriage to which these Regulations apply, but the Dangerous Goods Directive, ADR or RID does not apply, is carried out in a manner consistent with a derogation or transitional provision referred to at sub-paragraph (a) or (b).
(3) Where any exemption is granted pursuant to paragraph (1), that exemption is to be set out in a document to be called “[F12Carriage of] Dangerous Goods: Approved Derogations and Transitional Provisions”.
(4) The document may be revised in whole or in part from time to time.
(5) In the document the Secretary of State must set out—
(a)the types of carriage to which the exemption applies;
(b)the circumstances in which the exemption applies;
(c)the requirements and prohibitions that do not apply pursuant to paragraph (1); and
(d)any requirements and prohibitions that apply instead.
(6) The Secretary of State may not bring to an end, or substantially alter, an exemption unless those who might be affected have been consulted.
(7) This regulation does not limit the power to issue an authorisation under regulation 12(1).
Textual Amendments
F12Words in reg. 11(3) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 5
AuthorisationsE+W+S
12.—(1) A person referred to in column 1 of the Table may issue an authorisation to a person or class of persons to carry dangerous goods in circumstances which are contrary to prohibitions and requirements arising under Part 2 of these Regulations providing the conditions specified in column 2 are satisfied in respect of that carriage.
Column 1 | Column 2 |
---|---|
The Secretary of State for Transport | The carriage is national carriage |
The Secretary of State for Defence | The conditions are as follows— (a)(i)the carriage is national carriage; and (ii)either— (aa)the authorisation relates to prohibitions and requirements arising out of functions for which the Secretary of State for Defence is the GB competent authority; or (bb)it is in the interests of national security to disapply the prohibitions and requirements that are the subject of the authorisation; or (b)the carriage is by a vehicle or wagon belonging to or under the responsibility of one of the armed forces and it is not reasonably practicable for operational, training or security reasons related to the role of the armed forces for the prohibitions and requirements disapplied by the authorisation to apply to the carriage. |
[F13The Secretary of State for Energy and Climate Change | The carriage is national carriage and the authorisation relates to prohibitions and requirements arising out of functions for which the Secretary of State for Energy and Climate Change is the GB competent authority.] |
The Health and Safety Executive | The carriage is national carriage and the authorisation relates to prohibitions and requirements arising out of functions for which the Health and Safety Executive is the GB competent authority. |
(2) An authorisation issued pursuant to paragraph (1) must be in writing and must set out—
(a)the carriage that is covered by the authorisation;
(b)the reason that the authorisation is being issued; and
(c)any time limit applicable to the validity of the authorisation.
(3) An authorisation issued pursuant to paragraph (1) may be—
(a)made subject to conditions; and
(b)withdrawn at any time by the provision of a notice in writing to that effect to the person authorised and that notice must set out whether the withdrawal of the authorisation has effect immediately or whether the withdrawal has effect from a specified date.
(4) Any authorisation granted, or deemed to be granted, pursuant to regulation 9(2) or 10(13) of the 2007 Regulations that was in force immediately before the coming into force of these Regulations is deemed to be an authorisation issued pursuant to paragraph (1) of this regulation and subject to the same conditions as were in force immediately before the coming into force of these Regulations.
Textual Amendments
F13Words in reg. 12(1) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 6
Reference temperatures and standardsE+W+S
13.—(1) This regulation applies where the GB competent authority has recognised reference temperatures or standards in accordance with regulation 28(1) or (2).
(2) Part 2 does not apply in relation to national carriage to the extent that it imposes requirements on that carriage that conflict with the reference temperatures or standards recognised in accordance with regulation 28(1) or (2).
(3) The exemption set out in paragraph (2) only applies if the tank or pressure receptacle being used for carriage —
(a)is clearly marked or labelled to show that it is suitable for national carriage only; and
(b)does not carry the conformity mark.
Old pressure receptaclesE+W+S
14.—(1) This regulation applies in relation to national carriage.
(2) This regulation applies in relation to the carriage of dangerous goods which is not permitted under Part 2 of these Regulations because the old pressure receptacle used for that carriage cannot, by virtue of its design or construction, satisfy the requirements for the use of pressure receptacles set out in ADR or RID.
(3) Subject to paragraph (5), the requirements in ADR or RID which cannot be complied with are to be disregarded for the purposes of Part 2 of these Regulations if the requirements of paragraph (4) are satisfied.
(4) The requirements are—
(a)the old pressure receptacle has not been subject to modification, major repair or re-rating which has put it outside the scope of the design standard or design specification to which it was originally constructed;
(b)the old pressure receptacle—
(i)has been approved by a person appointed pursuant to regulation 29(2) as being safe for use;
(ii)was found to be safe by an inspection body in accordance with paragraph 5(4) of Schedule 3 to the 2007 Regulations and marked accordingly; or
(iii)was found to be safe by an inspection body or a competent person in accordance with paragraph 4(2) of Schedule 2 to the Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2004 M18 and marked accordingly,
and the time elapsed since the approval or the finding that the receptacle was safe does not exceed the intervals for periodic inspection specified in Tables 1 to 3 of Packaging Instruction P200 and Packing Instruction P203 in Section 4.1.4; and
(c)in respect of old pressure receptacles used for the carriage of acetylene, the operator has a written record of—
(i)the tare weight of the old pressure receptacle, including the porous substance and, where relevant, the acetone or other solvent;
(ii)the nature of solvent used; and
(iii)the maximum safe operating pressure of the old pressure receptacle.
(5) An old pressure receptacle which is of seamless construction or has contained acetylene and in relation to which a modification, major repair or re-rating has been undertaken may not be used for the carriage of dangerous goods.
(6) In this regulation “old pressure receptacle” means a cylinder, tube, pressure drum, closed cryogenic receptacle or bundle of cylinders—
(a)constructed—
(i)in the case of cylinders, tubes and cryogenic receptacles, on or before 30th June 2003; and
(ii)in the case of other pressure receptacles, on or before 9th May 2004;
(b)which did not meet the design and construction requirements applicable to that receptacle that were set out in ADR or RID as in force on the date construction was completed;
(c)which did comply with the design and construction requirements imposed under the law of the United Kingdom in force on the date construction was completed; and
(d)which has not been subject to a reassessment of conformity pursuant to a provision of the law of United Kingdom or another EEA State giving effect to article 5 of the Transportable Pressure Equipment Directive (including regulation 21 of these Regulations).
Marginal Citations
M18S.I. 2004/568; revoked by S.I. 2007/1573.
Carriage within the perimeter of an enclosed areaE+W+S
15. Part 2 of these Regulations does not apply in relation to the carriage of dangerous goods where such carriage is wholly performed within the perimeter of an enclosed area.
Carriage by road other than by vehiclesE+W+S
16.—(1) This regulation applies in relation to carriage by road.
(2) Part 2 of these Regulations does not apply in relation to carriage where that carriage is not undertaken by a vehicle.
Instruments of war and related materialE+W+S
17. Part 2 of these Regulations does not apply in relation to the carriage of class 7 goods by a vehicle or wagon belonging to, or under the responsibility of, one of the armed forces where those goods—
(a)are, or form part of, an instrument of war;
(b)are required for research into, or the development or production of, any such instrument or part of such instrument; or
(c)are produced in the course of, or in connection with, such research, development or production.
Nuclear materialE+W+S
18.—(1) Part 2 does not apply in relation to the carriage of Category I/II nuclear material or Category III nuclear material to the extent that it requires compliance with the security provisions.
(2) In this regulation—
(a)“Category I/II nuclear material” has the meaning given in regulation 3(3) of the Nuclear Industries Security Regulations 2003 M19; and
(b)“Category III nuclear material” has the meaning given in regulation 3(4) of the Nuclear Industries Security Regulations 2003.
Marginal Citations
PART 4E+W+STRANSPORTABLE PRESSURE EQUIPMENT
[F14Scope of Obligations]E+W+S
[F1419.—(1) Regulations 19A to 19F apply to transportable pressure equipment within the scope of the Transportable Pressure Equipment Directive by virtue of article 1(2)(a) of that Directive.
(2) For the avoidance of doubt, any reference in those regulations to a manufacturer, importer, distributor, owner or operator as “it” is not to be construed as excluding a natural person.]
Textual Amendments
[F15General ObligationsE+W+S
19A.—(1) A manufacturer, importer, distributor, owner or operator may only place or make available on the market, put into service or use equipment if it ensures that the equipment meets the requirements of the Dangerous Goods Directive.
(2) On receipt of a request from the Health and Safety Executive, a manufacturer, importer, distributor, owner or operator must identify to the Executive any manufacturer, importer, distributor or owner who has supplied it with, or to whom it has supplied, equipment over at least the previous 10 years.
(3) A request made pursuant to paragraph (2) must—
(a)be in writing; and
(b)contain a date by which a response is to be provided with that date being reasonable in all the circumstances.
(4) Paragraph (5) applies where a manufacturer, importer, distributor or owner provides to an operator information about equipment it has placed or made available on the market, or put into service.
(5) The information must comply with the Directives.
(6) This regulation does not apply to an owner who is a private individual using or intending to use equipment in the circumstances set out in article 8(4) of the Transportable Pressure Equipment Directive.]
Textual Amendments
[F15Obligations of ManufacturersE+W+S
19B.—(1) A manufacturer must—
(a)ensure a conformity assessment is carried out by a notified body;
(b)mark equipment in accordance with articles 14 and 15 of the Transportable Pressure Equipment Directive; and
(c)keep the technical documentation specified in the Dangerous Goods Directive for the period specified in that Directive.
(2) Where a manufacturer knows or has reason to believe that equipment it has placed on the market does not comply with the Directives, that manufacturer must—
(a)take immediate corrective measures to ensure that the equipment complies with the Directives;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
(3) Where a manufacturer considers that equipment it has placed on the market presents a risk, that manufacturer must immediately inform the TPED competent authority in any relevant member State of the risk, including providing details of any non-compliance with the Directives and any action taken in accordance with paragraph (2).
(4) A manufacturer must record each instance of non-compliance with the Directives and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(5) On receipt of a reasoned request from a TPED competent authority, a manufacturer must—
(a)provide that authority, in a language that it easily understands, all information and documents necessary to show that the equipment meets the requirements of the Directives; and
(b)cooperate with that authority in any action it takes to eliminate risks posed by that equipment.
(6) This regulation applies to an importer or a distributor as if that person were a manufacturer where the importer or distributor—
(a)places equipment on the market under the importer or distributor’s own name or trademark; or
(b)modifies equipment already placed on the market in such a way that compliance with the Directives may be affected.]
Textual Amendments
[F15Obligations of ImportersE+W+S
19C.—(1) An importer must ensure that—
(a)the manufacturer has complied with conformity assessment and drawn up the technical documentation in accordance with the Dangerous Goods Directive;
(b)equipment has been marked in accordance with articles 14 and 15 of the Transportable Pressure Equipment Directive;
(c)the certificate of conformity for the equipment either contains the name and address of the importer or has this information attached to it;
(d)the conditions in which equipment under the responsibility of the importer is stored and transported do not jeopardise the equipment’s compliance with the Dangerous Goods Directive; and
(e)the technical documentation specified in the Dangerous Goods Directive is kept for the period set out in that Directive.
(2) Where an importer knows or has reason to believe that equipment it has placed on the market does not comply with the Directives, that importer must—
(a)take immediate corrective measures to ensure that the equipment complies with the Directives;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
(3) Where an importer considers that equipment presents a risk before it has been placed on the market, that importer must inform the manufacturer and the Health and Safety Executive of the risk.
(4) Where an importer considers that equipment it has placed on the market presents a risk, that importer must immediately inform the manufacturer and the TPED competent authority in any relevant member State of the risk, including details of any non-compliance with the Directives and any action taken in accordance with paragraph (2).
(5) An importer must record each instance of non-compliance with the Directives and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(6) On receipt of a reasoned request from a TPED competent authority, an importer must—
(a)provide that authority, in a language that it easily understands, all information and documents necessary to show that the equipment meets the requirements of the Directives; and
(b)cooperate with that authority in any action taken to eliminate risks posed by that equipment.]
Textual Amendments
[F15Obligations of DistributorsE+W+S
19D.—(1) A distributor must ensure that—
(a)the equipment has been marked in accordance with articles 14 and 15 of the Transportable Pressure Equipment Directive;
(b)the certificate of conformity for the equipment contains or has attached to it the name and address of the importer where relevant; and
(c)the conditions in which equipment under the responsibility of the distributor is stored and transported do not jeopardise the equipment’s compliance with the Directives.
(2) Where a distributor knows or has reason to believe that equipment it made available on the market does not comply with the Directives, that distributor must—
(a)take immediate corrective measures to ensure that the equipment complies with the Directives;
(b)withdraw the equipment from the market; or
(c)issue a recall of the equipment.
(3) Where a distributor considers that equipment presents a risk before it has been made available on the market, that distributor must inform—
(a)the manufacturer or the importer; and
(b)the Health and Safety Executive,
of the risk.
(4) Where a distributor considers that equipment it has made available on the market presents a risk, that distributor must immediately inform—
(a)the manufacturer or the importer; and
(b)the TPED competent authority in any relevant member State,
of the risk, including details of any non-compliance with the Directives and any action taken in accordance with paragraph (2).
(5) A distributor must record each instance of non-compliance with the Directives and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(6) On receipt of a reasoned request from a TPED competent authority, a distributor must—
(a)provide that authority, in a language that it easily understands, all information and documents necessary to show that the equipment meets the requirements of the Directives; and
(b)cooperate with that authority in any action taken to eliminate risks posed by that equipment.]
Textual Amendments
[F15Obligations of OwnersE+W+S
19E.—(1) An owner must ensure that equipment for which it is responsible is stored and transported in conditions that do not jeopardise the compliance of that equipment with the Dangerous Goods Directive.
(2) Where an owner considers that the owner’s equipment presents a risk, it must inform—
(a)the manufacturer, importer or distributor; and
(b)the Health and Safety Executive,
of the risk.
(3) An owner must record each instance of non-compliance with the Directives and any corrective measure taken and must retain that record for at least 20 years from the date that the non-compliance is discovered.
(4) This regulation does not apply to private individuals using or intending to use equipment in the circumstances set out in article 8(4) of the Transportable Pressure Equipment Directive.]
Textual Amendments
[F15Obligations of OperatorsE+W+S
19F. Where an operator considers that equipment presents a risk, that operator must inform the owner and the Health and Safety Executive of the risk.]
Textual Amendments
[F16Authorised Representatives]E+W+S
[F1620.—(1) Subject to paragraph (3), a manufacturer may appoint in writing a person (“an authorised representative”) to carry out some or all of the duties imposed on the manufacturer by regulations 19A and 19B.
(2) An appointment made in accordance with paragraph (1) must include at least the following duties—
(a)keeping technical documentation;
(b)providing to a TPED competent authority, in response to a reasoned request and in a language that it easily understands, the information and documents necessary to show the equipment meets the requirements of the Directives; and
(c)cooperating with a TPED competent authority in any action it takes to eliminate risks posed by the equipment.
(3) An authorised representative must not be appointed to carry out duties imposed by regulation 19A(2), 19B(1)(a) or 19B(1)(b).
(4) The name and address of the authorised representative must be included on the certificate of conformity.
(5) An authorised representative must only provide information to an operator that complies with the requirements of the Directives.]
Textual Amendments
Reassessment of conformityE+W+S
21.—(1) This regulation applies to transportable pressure equipment within the scope of the Transportable Pressure Equipment Directive by virtue of article 1(2) [F17(c)] of that Directive.
(2) Equipment may be reassessed for conformity in accordance with this regulation.
(3) The equipment is to be—
(a)reassessed by a [F18type A] notified body in accordance with the procedure set out in [F19Annex III] to the Transportable Pressure Equipment Directive; and
[F20(b)inspected by a notified body notified for periodic inspection of that equipment and marked in accordance with the requirements of articles 14 and 15 of that Directive.]
[F21(4) But if a pressure receptacle has been manufactured in series to a design type for which a type A notified body notified for reassessment of conformity has issued a certificate of type reassessment, the reassessment of conformity may be undertaken by a notified body notified for periodic inspection of that pressure receptacle.]
[F22(5) In this regulation—
(a)“certificate of type reassessment” means a certificate issued in accordance with paragraph 7 of Annex III to the Transportable Pressure Equipment Directive; and
(b)“type A notified body” means a notified body conforming to standard EN ISO/IEC 17020 type A as revised or reissued from time to time.]
Textual Amendments
F17Word in reg. 21(1) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(2)
F18Words in reg. 21(3)(a) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(3)(a)
F19Words in reg. 21(3)(a) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(3)(b)
F20Reg. 21(3)(b) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 9(4)
Periodic inspection and repeated useE+W+S
22.—(1) This regulation applies to transportable pressure equipment within the scope of the Transportable Pressure Equipment Directive by virtue of article 1(2) [F23(b)] of that Directive.
(2) If the equipment bears a marking referred to in [F24articles 14 and 15] of the Transportable Pressure Equipment Directive F25..., it is to be subject to periodic inspection in accordance with the requirements of [F26the Dangerous Goods Directive].
F27(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) The marking requirements applicable to periodic inspections set out in [F28articles 14 and 15] of the Transportable Pressure Equipment Directive are to be complied with in relation to the equipment.
Textual Amendments
F23Word in reg. 22(1) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(2)
F24Words in reg. 22(2) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(3)(a)
F25Words in reg. 22(2) omitted (24.10.2011) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(3)(b)
F26Words in reg. 22(2) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(3)(c)
F27Reg. 22(3) omitted (24.10.2011) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(4)
F28Words in reg. 22(4) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 10(5)
Misleading and other markingsE+W+S
23.—(1) No person is to affix a marking on transportable pressure equipment which is likely to mislead third parties with regard to the meaning or the graphics of the conformity mark.
(2) Any other marking may be affixed to transportable pressure equipment provided that the visibility and legibility of the conformity mark is not reduced.
PART 5 E+W+SRADIOLOGICAL EMERGENCIES
Radiological emergenciesE+W+S
24.—(1) This regulation applies in relation to the carriage of class 7 goods.
(2) The requirements of Schedule 2 are to be complied with in relation to radiological emergencies.
(3) But paragraph (2) does not apply in relation to carriage by vehicles or wagons belonging to or under the responsibility of one of the armed forces.
(4) For the purposes of these Regulations—
(a)“radiological emergency” means a situation arising during the course of the carriage of a consignment that requires urgent action in order to protect workers, members of the public or the population (either partially or as a whole) from exposure;
(b)“exposure” means being exposed to ionising radiation; and
(c)“ionising radiation” means the transfer of energy in the form of particles or electromagnetic waves of a wavelength of 100 nanometres or less, or a frequency of 3x1015 hertz or more, capable of producing ions directly or indirectly.
PART 6 E+W+SGB COMPETENT AUTHORITY FUNCTIONS
Competent authorityE+W+S
25.—(1) The competent authority in Great Britain for the purposes of these Regulations is determined in accordance with paragraphs (2) to (5).
(2) Subject to paragraph (3), the Health and Safety Executive is the competent authority for class 1 goods in relation to—
(a)classification pursuant to Section 2.2.1;
(b)special provisions 16, 178, 266, 271, 272, 278, 288, 309, 311 and 645 of Chapter 3.3;
(c)mixed packing instruction MP21 of Section 4.1.10, Sub-sections 4.1.5.15 and 4.1.5.18;
(d)the design approval of containers or compartments, in accordance with note a to Sub-section 7.5.2.2; and
(e)the functions in respect of mobile explosives manufacturing units mentioned in Sub-sections 6.12.5 and 7.5.5.2.3.
(3) The competent authority is the Secretary of State for Defence for functions—
(a)in relation to military explosives for—
(i)classification pursuant to Section 2.2.1;
(ii)special provisions 16, 178, 266, 271 and 645 of Chapter 3.3;
(iii)mixed packing instruction MP21 of Section 4.1.10, Sub-sections 4.1.5.15 and 4.1.5.18;
(iv)special provision W2 of Section 7.2.4; and
(v)the design approval of containers or compartments, in accordance with note a to Sub-section 7.5.2.2; and
(b)in relation to class 7 goods which—
(i)are, or form part of, an instrument of war;
(ii)are required for research into, or the development or production of, any such instrument or part of such instrument; or
(iii)are produced in the course of, or in connection with, such research, development or production.
[F29(3A) The Secretary of State for Energy and Climate Change is the competent authority for those functions in relation to the carriage of class 7 goods for which the Secretary of State for Defence is not the competent authority, except for the function in sub-section 1.10.1.6 of ADR (register of driver training certificates).]
(4) The competent authority for the functions set out in Sub-sections 1.9.5.1, 1.9.5.3.1 and 1.9.5.3.8 of ADR is the traffic authority responsible for the road that passes through the tunnel.
(5) The Secretary of State for Transport is the competent authority for all other functions.
(6) The GB competent authority may appoint a person to carry out a function of the GB competent authority under these Regulations and a reference in these Regulations to the performance of the function by the GB competent authority is to be treated as including a reference to the performance of the function by the person appointed.
(7) The person may be appointed to carry out the function in particular circumstances or generally.
(8) Paragraphs (9) and (10) apply if the 2007 GB competent authority appointed, or was deemed by regulation 67(5) of the 2007 Regulations to have appointed, a person to perform a competent authority function pursuant to regulation 67(1) of those Regulations and that appointment had effect immediately before the coming into force of these Regulations.
(9) The person appointed, or deemed appointed, under the 2007 Regulations is deemed to be a person appointed pursuant to paragraph (6) to perform the equivalent function in ADR or RID.
(10) But in the case of a function performed in relation to carriage by inland waterway, the GB competent authority is to be deemed to have performed the function under the equivalent provision of ADN as it was performed, or deemed performed, under ADR pursuant to regulation 67(1) of the 2007 Regulations.
(11) In this regulation—
[F30(a)“military explosives” means any class 1 goods—
(i)under the control of the Secretary of State for Defence;
(ii)held for the service of the Crown for the purposes of the Ministry of Defence;
(iii)under the control of one of the armed forces; or
(iv)the carriage of which is certified by the Secretary of State for Defence to be in connection with the execution of a contract with the Secretary of State for Defence or with one of the armed forces; and]
(b)“traffic authority” is to be construed in accordance with section 121A of the Road Traffic Regulation Act 1984 M20.
Textual Amendments
F29Reg. 25(3A) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 11(2)
F30Reg. 25(11)(a) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 11(3)
Marginal Citations
M201984 c.27; section 121A was inserted by the New Roads and Street Works Act 1991 (c.22), Schedule 8, Part 2, paragraph 70 and amended by the Greater London Authority Act 1999 (c.29), section 271 and S.I. 1999/1820 and 2001/1400.
Functions of the GB competent authority arising under ADR, RID and ADNE+W+S
26. The GB competent authority is to perform those functions that are identified in ADR, RID and ADN as being the functions of a competent authority.
Fees in relation to functions of the GB competent authorityE+W+S
27.—(1) This regulation applies where a person has asked the GB competent authority to perform a function which is, by virtue of regulation 26, a function of the GB competent authority.
(2) A fee may be charged for, or in connection with, the performance of the function by, or on behalf of, the GB competent authority.
(3) Any fee charged must be reasonable for the work performed or to be performed.
(4) But in relation to a function mentioned in regulation 29(3), paragraph 1(2) and (3) of Schedule 3 applies instead of paragraphs (2) and (3) of this regulation.
GB competent authority functions relating to reference temperatures and standardsE+W+S
28.—(1) The GB competent authority may recognise different reference temperatures from those set out in—
(a)paragraphs (5)(b) and (c) of packing instruction P200 of Section 4.1.4; or
(b)Sub-sections 4.2.2.7.2, 4.3.3.2.2 or 4.3.3.2.3,
in relation to the filling of pressure receptacles and tanks intended to be used only for the national carriage of liquefied gas.
(2) The GB competent authority may recognise standards for the construction of the shell of a tank intended to be used only for the national carriage of liquefied gas which specify—
(a)a different design reference temperature for the shell of the tank from that set out in Sub-section 6.7.3.2.1; or
(b)a different test pressure for the shell of the tank from that set out in Sub-sections 4.3.3.2.2 and 4.3.3.2.3,
provided that the temperature or pressure specified in the standard is such that it will ensure that the shell is safe and suitable for its intended use.
Appointments by the GB competent authorityE+W+S
29.—(1) Paragraph (2) applies in respect of equipment which under these Regulations may not be used in connection with the carriage of dangerous goods unless it has been approved for that use.
(2) The GB competent authority may appoint such persons as it thinks fit to determine whether the equipment should be approved and, if so, to approve that equipment for use.
(3) Where it is a function of the GB competent authority, by virtue of regulation 26, to approve or authorise a body or expert to carry out, witness, supervise or decide to waive an inspection, examination, test or approval in respect of equipment used in connection with the carriage of dangerous goods, that function is to be performed by the appointment of a person pursuant to paragraph (2).
(4) In respect of the appointment of a person to carry out the functions of a notified body for the purposes of Part 4 of these Regulations, the GB competent authority may not appoint a person pursuant to paragraph (2) unless that person satisfies the criteria set out in [F31the Dangerous Goods Directive and the requirements set out in articles 20 and 26 of the Transportable Pressure Equipment Directive.]
F32(5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(6) Schedule 3 has effect in relation to the making of appointments pursuant to paragraph (2).
Textual Amendments
F31Words in reg. 29(4) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 12(2)
F32Reg. 29(5) omitted (24.10.2011) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 12(3)
Certain functions to be deemed to have been performed by the GB competent authorityE+W+S
30.—(1) Paragraphs (3) and (4) apply if—
(a)the 2007 GB competent authority performed, or was deemed by regulation 70 of the 2007 Regulations to have performed, a function pursuant to regulation 66(1) of those Regulations; and
(b)the action taken by the 2007 GB competent authority, as a consequence of the performance of the function, had effect immediately before the coming into force of these Regulations.
(2) But paragraphs (3) and (4) do not apply where the function was performed, or deemed performed, by appointment in accordance with regulation 69(2) of the 2007 Regulations.
(3) The GB competent authority is deemed to have performed the function pursuant to regulation 26 under the same provision of ADR or RID as it was performed, or deemed performed, pursuant to regulation 66(1).
(4) In the case of a function performed in relation to carriage by inland waterway, the GB competent authority is to be deemed to have performed the function under the equivalent provision of ADN as it was performed, or deemed performed, under ADR pursuant to regulation 66(1).
PART 7E+W+SMISCELLANEOUS
Keeping and provision of informationE+W+S
31.—(1) An accident report of the kind referred to in Sub-section 1.8.3.6 is to be provided to the GB competent authority or enforcement authority if requested.
(2) A written record of the information contained in the transport document described in Chapters 5.4 and 5.5 is to be kept for a period of three months after the completion of the carriage in question.
EnforcementE+W+S
32.—(1) The enforcing authorities for these Regulations are—
(a)the Health and Safety Executive in relation to road and rail;
(b)the Secretary of State for Transport in relation to road and inland waterways; F33...
(c)the chief officer of police of each area in relation to road[F34;]
[F34(d)the Secretary of State for Energy and Climate Change in relation to the carriage of class 7 goods by road and inland waterways, except in respect of carriage for which the Secretary of State for Defence is an enforcing authority; and]
[F34(e)the Secretary of State for Defence in relation to road, rail and inland waterways but only in connection with those functions for which the Secretary of State for Defence is the GB competent authority.]
(2) But the Health and Safety Executive is not [F35an enforcing authority] in relation to rail to the extent that the Office of Rail Regulation is [F35an enforcing authority] pursuant to regulation 3(1) of the Health and Safety (Enforcing Authority for Railways and Other Guided Transport Systems) Regulations 2006 M21.
(3) Paragraphs (1) and (2) are subject to [F36paragraphs (4) and (5)] .
(4) The Secretary of State for Transport is the only enforcing authority [F37in relation to the carriage of all classes of goods, except class 7 goods,] to the extent that these Regulations require compliance with the security provisions.
[F38(5) The Secretary of State for Energy and Climate Change is the only enforcing authority in relation to the carriage of class 7 goods to the extent that these Regulations require compliance with the security provisions.]
Textual Amendments
F33Word in reg. 32(1)(b) omitted (24.10.2011) by virtue of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 13(2)
F34Reg. 32(1)(d)(e) substituted for full stop (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 13(3)
F35Words in reg. 32(2) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 13(4)
F36Words in reg. 32(3) substituted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 13(5)
F37Words in reg. 32(4) inserted (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 13(6)
F38Reg. 32(5) added (24.10.2011) by The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 (S.I. 2011/1885), regs. 1, 13(7)
Marginal Citations
M21S.I. 2006/557; amended by S.I. 2007/1573; there is another amendment not relevant to these Regulations.
RevocationE+W+S
33. The 2007 Regulations are revoked.
[F39Duty to ReviewE+W+S
34.—(1) The Secretary of State must—
(a)conduct a review of the operation and effect of these Regulations;
(b)set out the conclusions of the review in a report; and
(c)publish a report.
(2) In carrying out the review the Secretary of State must, so far as is reasonable, have regard to how the Directives are implemented in other member States of the EU.
(3) The report must in particular—
(a)set out the objectives intended to be achieved by these Regulations;
(b)assess the extent to which those objectives are achieved; and
(c)assess whether those objectives remain appropriate and, if so, the extent to which they could be achieved with a system that imposes less regulation.
(4) “Review period” means—
(a)the period of five years beginning with the day on which the Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) Regulations 2011 come into force; and
(b)subject to paragraph (5), each successive period of five years.
(5) If a report under this regulation is published before the last day of the review period to which it relates, the following review period is to begin with the day on which that report is published.]
Textual Amendments
Signed by the authority of the Secretary of State
Paul Clark
Parliamentary Under Secretary of State
Department for Transport