- Latest available (Revised)
- Point in Time (15/07/2011)
- Original (As made)
Version Superseded: 06/04/2012
Point in time view as at 15/07/2011. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
The Building Regulations 2010, Section 30 is up to date with all changes known to be in force on or before 10 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
30.—(1) An energy assessor must be a member of an accreditation scheme approved by the Secretary of State.
(2) The terms of approval of any accreditation scheme may be limited in relation to the categories of building for which members may produce certificates.
(3) Before approving an accreditation scheme the Secretary of State must be satisfied that the scheme contains adequate provision—
(a)for ensuring that members of the scheme carry out consistent and accurate energy assessments in an independent manner;
(b)for ensuring that members of the scheme are fit and proper persons who are qualified (by their education, training and experience) to carry out energy assessments;
(c)for requiring members of the scheme to prepare energy performance certificates and recommendation reports using a standard form for each type of document;
(d)for ensuring the production and publication of a code as regards the conduct required of its members;
(e)for indemnity arrangements in relation to owners and prospective or actual buyers or tenants;
(f)for facilitating the resolution of complaints against members of the scheme;
(g)for requiring energy performance certificates and recommendation reports produced by members of the scheme to be entered on the relevant register referred to in paragraph (4); and
(h)for the keeping of a register of the members of the scheme.
(4) An energy assessor who issues an energy performance certificate and recommendation report must ensure they are entered onto the relevant register maintained by the Secretary of State in accordance with regulation 31 of the Energy Performance of Buildings (Certificates and Inspections) (England and Wales) Regulations 2007 M1 before giving them to the person who requested them.
Marginal Citations
M1S.I. 2007/991, amended by S.I. 2008/2363.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: