
Print Options
PrintThe Whole
Instrument
PrintThe Whole
Part
PrintThis
Section
only
Changes over time for: Section 25


Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Version Superseded: 31/12/2020
Status:
Point in time view as at 16/01/2012. This version of this provision has been superseded.

Status
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Changes to legislation:
There are currently no known outstanding effects for the The Railways (Interoperability) Regulations 2011, Section 25.

Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
EC declaration of conformity or suitability for useU.K.
This section has no associated Explanatory Memorandum
25.—(1) Where an EC declaration of conformity or suitability for use has not been drawn up by the manufacturer or the manufacturer's authorised representative established in the EU, an EC declaration of conformity or suitability for use must be drawn up by any person who—
(a)places that interoperability constituent on the market; or
(b)uses that interoperability constituent, or any part of it, in any other interoperability constituent that the person is manufacturing or assembling, or in any project subsystem that the person is constructing, upgrading or renewing
before the person places the interoperability constituent on the market with a view to its use on the rail system or uses it or any part of it on the rail system.
(2) An EC declaration of conformity or suitability for use must be drawn up in accordance with the requirements of Annex IV to the Directive.
(3) A person may only draw up an EC declaration of conformity or suitability for use if satisfied that the interoperability constituent satisfies the relevant conditions—
(a)of the applicable TSI, or
(b)of European specifications developed to comply with the conditions of the applicable TSI.
(4) If an interoperability constituent is subject to other requirements of an EU Directive, a person may only draw up an EC declaration of conformity or suitability for use if satisfied that the interoperability constituent meets those other requirements and the person must state in the declaration that the interoperability constituent meets those other requirements.
Back to top