- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As made)
Point in time view as at 31/12/2020.
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 is up to date with all changes known to be in force on or before 19 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
(This note is not part of the Regulations)
These Regulations implement Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (recast) (OJ No L174, 01.07.2011, p88). The Directive imposes harmonised restrictions on the use of certain listed hazardous substances in 11 categories of electrical and electronic equipment. It also requires the use of EU declarations of conformity and CE marking, and provides for market surveillance. The Directive seeks to reduce the risks posed by hazardous substances to health and the environment.
The Directive repeals and replaces Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (OJ No L37, 13.02.2003, p19) (as amended) which was implemented in the United Kingdom by the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (S.I. 2008/37) (as amended). These Regulations revoke and replace S.I. 2008/37 (regulation 7).
Regulation 3 sets out the restrictions on the use of certain hazardous substances in electrical and electronic equipment (‘EEE’). Regulation 5 and Schedule 1 set out the EEE to which these Regulations apply. Regulation 6 sets out a time-limited exclusion from the scope of these Regulations.
Part 2 of the Regulations sets out the prohibitions and obligations that apply to economic operators. They are divided into prohibitions and obligations applying to manufacturers and their authorised representatives (regulations 10 to 22), importers (regulations 23 to 28), distributors (regulations 29 to 32), and all economic operators (regulations 33 and 34). The various categories of economic operator are defined in regulation 2. In certain circumstances importers and distributors are required to comply with the duties of manufacturers in place of, or in addition to, the duties that apply to importers and distributors (regulations 28 and 32).
Part 3 deals with the enforcement of these Regulations. Regulation 35 appoints the Secretary of State as the market surveillance authority, both for the purposes of these Regulations and for the purposes of Regulation (EC) No 765/2008 of the European Parliament of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 (OJ No L218, 13.08.2008 p30). The powers under Regulation No 765/2008 are available to supplement the enforcement provisions in these Regulations.
Part 4 of the Regulations requires the Secretary of State to review the operation and effect of these Regulations and publish a report within five years after they come into force and within every five years after that. Following a review it will fall to the Secretary of State to consider whether the Regulations should remain as they are, or be revoked or be amended. A further instrument would be needed to revoke the Regulations or to amend them.
Schedule 1 sets out what EEE are inside and outside the scope of these Regulations. Schedule 2 contains the powers that the market surveillance authority can exercise, such as test purchases, powers of entry and warrants. Schedule 3 sets out the actions the market surveillance authority can take, and includes provision for compliance, enforcement and recall notices.
A transposition note and a full impact assessment of the effect that this instrument will have on the costs of business and the voluntary sector are available from the BIS website (www.bis.gov.uk). They are also annexed to the Explanatory Memorandum published alongside the instrument on www.legislation.gov.uk.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: